Merge the latest enhancements from trunk.

FossilOrigin-Name: 7d6cfc79e7e5534ebacd980479917bc528a638f7

27 files changed, 557 insertions, 1163 deletions

diff --git a/src/btree.c b/src/btree.c
index a61a6edf2..4a51b01d7 100644
--- a/src/btree.c
+++ b/src/btree.c
@@ -2556,19 +2556,11 @@ int sqlite3BtreeClose(Btree *p){
 }
 
 /*
-** Change the limit on the number of pages allowed in the cache.
-**
-** The maximum number of cache pages is set to the absolute
-** value of mxPage.  If mxPage is negative, the pager will
-** operate asynchronously - it will not stop to do fsync()s
-** to insure data is written to the disk surface before
-** continuing.  Transactions still work if synchronous is off,
-** and the database cannot be corrupted if this program
-** crashes.  But if the operating system crashes or there is
-** an abrupt power failure when synchronous is off, the database
-** could be left in an inconsistent and unrecoverable state.
-** Synchronous is on by default so database corruption is not
-** normally a worry.
+** Change the "soft" limit on the number of pages in the cache.
+** Unused and unmodified pages will be recycled when the number of
+** pages in the cache exceeds this soft limit.  But the size of the
+** cache is allowed to grow larger than this limit if it contains
+** dirty pages or pages still in active use.
 */
 int sqlite3BtreeSetCacheSize(Btree *p, int mxPage){
   BtShared *pBt = p->pBt;
@@ -2579,6 +2571,26 @@ int sqlite3BtreeSetCacheSize(Btree *p, int mxPage){
   return SQLITE_OK;
 }
 
+/*
+** Change the "spill" limit on the number of pages in the cache.
+** If the number of pages exceeds this limit during a write transaction,
+** the pager might attempt to "spill" pages to the journal early in
+** order to free up memory.
+**
+** The value returned is the current spill size.  If zero is passed
+** as an argument, no changes are made to the spill size setting, so
+** using mxPage of 0 is a way to query the current spill size.
+*/
+int sqlite3BtreeSetSpillSize(Btree *p, int mxPage){
+  BtShared *pBt = p->pBt;
+  int res;
+  assert( sqlite3_mutex_held(p->db->mutex) );
+  sqlite3BtreeEnter(p);
+  res = sqlite3PagerSetSpillsize(pBt->pPager, mxPage);
+  sqlite3BtreeLeave(p);
+  return res;
+}
+
 #if SQLITE_MAX_MMAP_SIZE>0
 /*
 ** Change the limit on the amount of the database file that may be
diff --git a/src/btree.h b/src/btree.h
index 0c15a59c1..09b713f3d 100644
--- a/src/btree.h
+++ b/src/btree.h
@@ -63,6 +63,7 @@ int sqlite3BtreeOpen(
 
 int sqlite3BtreeClose(Btree*);
 int sqlite3BtreeSetCacheSize(Btree*,int);
+int sqlite3BtreeSetSpillSize(Btree*,int);
 #if SQLITE_MAX_MMAP_SIZE>0
   int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
 #endif
diff --git a/src/build.c b/src/build.c
index 8cb2d44ac..f928ba307 100644
--- a/src/build.c
+++ b/src/build.c
@@ -1049,18 +1049,19 @@ begin_table_error:
   return;
 }
 
-/*
-** This macro is used to compare two strings in a case-insensitive manner.
-** It is slightly faster than calling sqlite3StrICmp() directly, but
-** produces larger code.
-**
-** WARNING: This macro is not compatible with the strcmp() family. It
-** returns true if the two strings are equal, otherwise false.
+/* Set properties of a table column based on the (magical)
+** name of the column.
 */
-#define STRICMP(x, y) (\
-sqlite3UpperToLower[*(unsigned char *)(x)]==   \
-sqlite3UpperToLower[*(unsigned char *)(y)]     \
-&& sqlite3StrICmp((x)+1,(y)+1)==0 )
+void sqlite3ColumnPropertiesFromName(Table *pTab, Column *pCol){
+#if SQLITE_ENABLE_HIDDEN_COLUMNS
+  if( sqlite3_strnicmp(pCol->zName, "__hidden__", 10)==0 ){
+    pCol->colFlags |= COLFLAG_HIDDEN;
+  }else if( pTab && pCol!=pTab->aCol && (pCol[-1].colFlags & COLFLAG_HIDDEN) ){
+    pTab->tabFlags |= TF_OOOHidden;
+  }
+#endif
+}
+
 
 /*
 ** Add a new column to the table currently being constructed.
@@ -1086,7 +1087,7 @@ void sqlite3AddColumn(Parse *pParse, Token *pName){
   z = sqlite3NameFromToken(db, pName);
   if( z==0 ) return;
   for(i=0; i<p->nCol; i++){
-    if( STRICMP(z, p->aCol[i].zName) ){
+    if( sqlite3_stricmp(z, p->aCol[i].zName)==0 ){
       sqlite3ErrorMsg(pParse, "duplicate column name: %s", z);
       sqlite3DbFree(db, z);
       return;
@@ -1104,6 +1105,7 @@ void sqlite3AddColumn(Parse *pParse, Token *pName){
   pCol = &p->aCol[p->nCol];
   memset(pCol, 0, sizeof(p->aCol[0]));
   pCol->zName = z;
+  sqlite3ColumnPropertiesFromName(p, pCol);
  
   /* If there is no type specified, columns have the default affinity
   ** 'BLOB'. If there is a type specified, then sqlite3AddColumnType() will
diff --git a/src/delete.c b/src/delete.c
index 506c2af1f..68c4c4b36 100644
--- a/src/delete.c
+++ b/src/delete.c
@@ -106,7 +106,8 @@ void sqlite3MaterializeView(
     assert( pFrom->a[0].pOn==0 );
     assert( pFrom->a[0].pUsing==0 );
   }
-  pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 0, 0, 0);
+  pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, 
+                          SF_IncludeHidden, 0, 0);
   sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur);
   sqlite3Select(pParse, pSel, &dest);
   sqlite3SelectDelete(db, pSel);
diff --git a/src/insert.c b/src/insert.c
index f4af3391d..7585a7727 100644
--- a/src/insert.c
+++ b/src/insert.c
@@ -736,10 +736,8 @@ void sqlite3Insert(
   /* Make sure the number of columns in the source data matches the number
   ** of columns to be inserted into the table.
   */
-  if( IsVirtual(pTab) ){
-    for(i=0; i<pTab->nCol; i++){
-      nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0);
-    }
+  for(i=0; i<pTab->nCol; i++){
+    nHidden += (IsHiddenColumn(&pTab->aCol[i]) ? 1 : 0);
   }
   if( pColumn==0 && nColumn && nColumn!=(pTab->nCol-nHidden) ){
     sqlite3ErrorMsg(pParse, 
@@ -835,15 +833,14 @@ void sqlite3Insert(
 
     /* Create the new column data
     */
-    for(i=0; i<pTab->nCol; i++){
-      if( pColumn==0 ){
-        j = i;
-      }else{
+    for(i=j=0; i<pTab->nCol; i++){
+      if( pColumn ){
         for(j=0; j<pColumn->nId; j++){
           if( pColumn->a[j].idx==i ) break;
         }
       }
-      if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId) ){
+      if( (!useTempTable && !pList) || (pColumn && j>=pColumn->nId)
+            || (pColumn==0 && IsOrdinaryHiddenColumn(&pTab->aCol[i])) ){
         sqlite3ExprCode(pParse, pTab->aCol[i].pDflt, regCols+i+1);
       }else if( useTempTable ){
         sqlite3VdbeAddOp3(v, OP_Column, srcTab, j, regCols+i+1); 
@@ -851,6 +848,7 @@ void sqlite3Insert(
         assert( pSelect==0 ); /* Otherwise useTempTable is true */
         sqlite3ExprCodeAndCache(pParse, pList->a[j].pExpr, regCols+i+1);
       }
+      if( pColumn==0 && !IsOrdinaryHiddenColumn(&pTab->aCol[i]) ) j++;
     }
 
     /* If this is an INSERT on a view with an INSTEAD OF INSERT trigger,
@@ -934,7 +932,6 @@ void sqlite3Insert(
       }
       if( pColumn==0 ){
         if( IsHiddenColumn(&pTab->aCol[i]) ){
-          assert( IsVirtual(pTab) );
           j = -1;
           nHidden++;
         }else{
@@ -1885,7 +1882,7 @@ static int xferOptimization(
     return 0;   /* The result set must have exactly one column */
   }
   assert( pEList->a[0].pExpr );
-  if( pEList->a[0].pExpr->op!=TK_ALL ){
+  if( pEList->a[0].pExpr->op!=TK_ASTERISK ){
     return 0;   /* The result set must be the special operator "*" */
   }
 
@@ -1921,6 +1918,13 @@ static int xferOptimization(
   for(i=0; i<pDest->nCol; i++){
     Column *pDestCol = &pDest->aCol[i];
     Column *pSrcCol = &pSrc->aCol[i];
+#ifdef SQLITE_ENABLE_HIDDEN_COLUMNS
+    if( (db->flags & SQLITE_Vacuum)==0 
+     && (pDestCol->colFlags | pSrcCol->colFlags) & COLFLAG_HIDDEN 
+    ){
+      return 0;    /* Neither table may have __hidden__ columns */
+    }
+#endif
     if( pDestCol->affinity!=pSrcCol->affinity ){
       return 0;    /* Affinity must be the same on all columns */
     }
diff --git a/src/lempar.c b/src/lempar.c
deleted file mode 100644
index 5e5a11aea..000000000
--- a/src/lempar.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/* Driver template for the LEMON parser generator.
-** The author disclaims copyright to this source code.
-**
-** This version of "lempar.c" is modified, slightly, for use by SQLite.
-** The only modifications are the addition of a couple of NEVER()
-** macros to disable tests that are needed in the case of a general
-** LALR(1) grammar but which are always false in the
-** specific grammar used by SQLite.
-*/
-/* First off, code is included that follows the "include" declaration
-** in the input grammar file. */
-#include <stdio.h>
-%%
-/* Next is all token values, in a form suitable for use by makeheaders.
-** This section will be null unless lemon is run with the -m switch.
-*/
-/* 
-** These constants (all generated automatically by the parser generator)
-** specify the various kinds of tokens (terminals) that the parser
-** understands. 
-**
-** Each symbol here is a terminal symbol in the grammar.
-*/
-%%
-/* Make sure the INTERFACE macro is defined.
-*/
-#ifndef INTERFACE
-# define INTERFACE 1
-#endif
-/* The next thing included is series of defines which control
-** various aspects of the generated parser.
-**    YYCODETYPE         is the data type used for storing terminal
-**                       and nonterminal numbers.  "unsigned char" is
-**                       used if there are fewer than 250 terminals
-**                       and nonterminals.  "int" is used otherwise.
-**    YYNOCODE           is a number of type YYCODETYPE which corresponds
-**                       to no legal terminal or nonterminal number.  This
-**                       number is used to fill in empty slots of the hash 
-**                       table.
-**    YYFALLBACK         If defined, this indicates that one or more tokens
-**                       have fall-back values which should be used if the
-**                       original value of the token will not parse.
-**    YYACTIONTYPE       is the data type used for storing terminal
-**                       and nonterminal numbers.  "unsigned char" is
-**                       used if there are fewer than 250 rules and
-**                       states combined.  "int" is used otherwise.
-**    ParseTOKENTYPE     is the data type used for minor tokens given 
-**                       directly to the parser from the tokenizer.
-**    YYMINORTYPE        is the data type used for all minor tokens.
-**                       This is typically a union of many types, one of
-**                       which is ParseTOKENTYPE.  The entry in the union
-**                       for base tokens is called "yy0".
-**    YYSTACKDEPTH       is the maximum depth of the parser's stack.  If
-**                       zero the stack is dynamically sized using realloc()
-**    ParseARG_SDECL     A static variable declaration for the %extra_argument
-**    ParseARG_PDECL     A parameter declaration for the %extra_argument
-**    ParseARG_STORE     Code to store %extra_argument into yypParser
-**    ParseARG_FETCH     Code to extract %extra_argument from yypParser
-**    YYERRORSYMBOL      is the code number of the error symbol.  If not
-**                       defined, then do no error processing.
-**    YYNSTATE           the combined number of states.
-**    YYNRULE            the number of rules in the grammar
-**    YY_MAX_SHIFT       Maximum value for shift actions
-**    YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions
-**    YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions
-**    YY_MIN_REDUCE      Maximum value for reduce actions
-**    YY_ERROR_ACTION    The yy_action[] code for syntax error
-**    YY_ACCEPT_ACTION   The yy_action[] code for accept
-**    YY_NO_ACTION       The yy_action[] code for no-op
-*/
-%%
-
-/* The yyzerominor constant is used to initialize instances of
-** YYMINORTYPE objects to zero. */
-static const YYMINORTYPE yyzerominor = { 0 };
-
-/* Define the yytestcase() macro to be a no-op if is not already defined
-** otherwise.
-**
-** Applications can choose to define yytestcase() in the %include section
-** to a macro that can assist in verifying code coverage.  For production
-** code the yytestcase() macro should be turned off.  But it is useful
-** for testing.
-*/
-#ifndef yytestcase
-# define yytestcase(X)
-#endif
-
-
-/* Next are the tables used to determine what action to take based on the
-** current state and lookahead token.  These tables are used to implement
-** functions that take a state number and lookahead value and return an
-** action integer.  
-**
-** Suppose the action integer is N.  Then the action is determined as
-** follows
-**
-**   0 <= N <= YY_MAX_SHIFT             Shift N.  That is, push the lookahead
-**                                      token onto the stack and goto state N.
-**
-**   N between YY_MIN_SHIFTREDUCE       Shift to an arbitrary state then
-**     and YY_MAX_SHIFTREDUCE           reduce by rule N-YY_MIN_SHIFTREDUCE.
-**
-**   N between YY_MIN_REDUCE            Reduce by rule N-YY_MIN_REDUCE
-**     and YY_MAX_REDUCE
-
-**   N == YY_ERROR_ACTION               A syntax error has occurred.
-**
-**   N == YY_ACCEPT_ACTION              The parser accepts its input.
-**
-**   N == YY_NO_ACTION                  No such action.  Denotes unused
-**                                      slots in the yy_action[] table.
-**
-** The action table is constructed as a single large table named yy_action[].
-** Given state S and lookahead X, the action is computed as
-**
-**      yy_action[ yy_shift_ofst[S] + X ]
-**
-** If the index value yy_shift_ofst[S]+X is out of range or if the value
-** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X or if yy_shift_ofst[S]
-** is equal to YY_SHIFT_USE_DFLT, it means that the action is not in the table
-** and that yy_default[S] should be used instead.  
-**
-** The formula above is for computing the action when the lookahead is
-** a terminal symbol.  If the lookahead is a non-terminal (as occurs after
-** a reduce action) then the yy_reduce_ofst[] array is used in place of
-** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of
-** YY_SHIFT_USE_DFLT.
-**
-** The following are the tables generated in this section:
-**
-**  yy_action[]        A single table containing all actions.
-**  yy_lookahead[]     A table containing the lookahead for each entry in
-**                     yy_action.  Used to detect hash collisions.
-**  yy_shift_ofst[]    For each state, the offset into yy_action for
-**                     shifting terminals.
-**  yy_reduce_ofst[]   For each state, the offset into yy_action for
-**                     shifting non-terminals after a reduce.
-**  yy_default[]       Default action for each state.
-*/
-%%
-
-/* The next table maps tokens into fallback tokens.  If a construct
-** like the following:
-** 
-**      %fallback ID X Y Z.
-**
-** appears in the grammar, then ID becomes a fallback token for X, Y,
-** and Z.  Whenever one of the tokens X, Y, or Z is input to the parser
-** but it does not parse, the type of the token is changed to ID and
-** the parse is retried before an error is thrown.
-*/
-#ifdef YYFALLBACK
-static const YYCODETYPE yyFallback[] = {
-%%
-};
-#endif /* YYFALLBACK */
-
-/* The following structure represents a single element of the
-** parser's stack.  Information stored includes:
-**
-**   +  The state number for the parser at this level of the stack.
-**
-**   +  The value of the token stored at this level of the stack.
-**      (In other words, the "major" token.)
-**
-**   +  The semantic value stored at this level of the stack.  This is
-**      the information used by the action routines in the grammar.
-**      It is sometimes called the "minor" token.
-**
-** After the "shift" half of a SHIFTREDUCE action, the stateno field
-** actually contains the reduce action for the second half of the
-** SHIFTREDUCE.
-*/
-struct yyStackEntry {
-  YYACTIONTYPE stateno;  /* The state-number, or reduce action in SHIFTREDUCE */
-  YYCODETYPE major;      /* The major token value.  This is the code
-                         ** number for the token at this stack level */
-  YYMINORTYPE minor;     /* The user-supplied minor token value.  This
-                         ** is the value of the token  */
-};
-typedef struct yyStackEntry yyStackEntry;
-
-/* The state of the parser is completely contained in an instance of
-** the following structure */
-struct yyParser {
-  int yyidx;                    /* Index of top element in stack */
-#ifdef YYTRACKMAXSTACKDEPTH
-  int yyidxMax;                 /* Maximum value of yyidx */
-#endif
-  int yyerrcnt;                 /* Shifts left before out of the error */
-  ParseARG_SDECL                /* A place to hold %extra_argument */
-#if YYSTACKDEPTH<=0
-  int yystksz;                  /* Current side of the stack */
-  yyStackEntry *yystack;        /* The parser's stack */
-#else
-  yyStackEntry yystack[YYSTACKDEPTH];  /* The parser's stack */
-#endif
-};
-typedef struct yyParser yyParser;
-
-#ifndef NDEBUG
-#include <stdio.h>
-static FILE *yyTraceFILE = 0;
-static char *yyTracePrompt = 0;
-#endif /* NDEBUG */
-
-#ifndef NDEBUG
-/* 
-** Turn parser tracing on by giving a stream to which to write the trace
-** and a prompt to preface each trace message.  Tracing is turned off
-** by making either argument NULL 
-**
-** Inputs:
-** <ul>
-** <li> A FILE* to which trace output should be written.
-**      If NULL, then tracing is turned off.
-** <li> A prefix string written at the beginning of every
-**      line of trace output.  If NULL, then tracing is
-**      turned off.
-** </ul>
-**
-** Outputs:
-** None.
-*/
-void ParseTrace(FILE *TraceFILE, char *zTracePrompt){
-  yyTraceFILE = TraceFILE;
-  yyTracePrompt = zTracePrompt;
-  if( yyTraceFILE==0 ) yyTracePrompt = 0;
-  else if( yyTracePrompt==0 ) yyTraceFILE = 0;
-}
-#endif /* NDEBUG */
-
-#ifndef NDEBUG
-/* For tracing shifts, the names of all terminals and nonterminals
-** are required.  The following table supplies these names */
-static const char *const yyTokenName[] = { 
-%%
-};
-#endif /* NDEBUG */
-
-#ifndef NDEBUG
-/* For tracing reduce actions, the names of all rules are required.
-*/
-static const char *const yyRuleName[] = {
-%%
-};
-#endif /* NDEBUG */
-
-
-#if YYSTACKDEPTH<=0
-/*
-** Try to increase the size of the parser stack.
-*/
-static void yyGrowStack(yyParser *p){
-  int newSize;
-  yyStackEntry *pNew;
-
-  newSize = p->yystksz*2 + 100;
-  pNew = realloc(p->yystack, newSize*sizeof(pNew[0]));
-  if( pNew ){
-    p->yystack = pNew;
-    p->yystksz = newSize;
-#ifndef NDEBUG
-    if( yyTraceFILE ){
-      fprintf(yyTraceFILE,"%sStack grows to %d entries!\n",
-              yyTracePrompt, p->yystksz);
-    }
-#endif
-  }
-}
-#endif
-
-/* 
-** This function allocates a new parser.
-** The only argument is a pointer to a function which works like
-** malloc.
-**
-** Inputs:
-** A pointer to the function used to allocate memory.
-**
-** Outputs:
-** A pointer to a parser.  This pointer is used in subsequent calls
-** to Parse and ParseFree.
-*/
-void *ParseAlloc(void *(*mallocProc)(u64)){
-  yyParser *pParser;
-  pParser = (yyParser*)(*mallocProc)( (u64)sizeof(yyParser) );
-  if( pParser ){
-    pParser->yyidx = -1;
-#ifdef YYTRACKMAXSTACKDEPTH
-    pParser->yyidxMax = 0;
-#endif
-#if YYSTACKDEPTH<=0
-    pParser->yystack = NULL;
-    pParser->yystksz = 0;
-    yyGrowStack(pParser);
-#endif
-  }
-  return pParser;
-}
-
-/* The following function deletes the value associated with a
-** symbol.  The symbol can be either a terminal or nonterminal.
-** "yymajor" is the symbol code, and "yypminor" is a pointer to
-** the value.
-*/
-static void yy_destructor(
-  yyParser *yypParser,    /* The parser */
-  YYCODETYPE yymajor,     /* Type code for object to destroy */
-  YYMINORTYPE *yypminor   /* The object to be destroyed */
-){
-  ParseARG_FETCH;
-  switch( yymajor ){
-    /* Here is inserted the actions which take place when a
-    ** terminal or non-terminal is destroyed.  This can happen
-    ** when the symbol is popped from the stack during a
-    ** reduce or during error processing or when a parser is 
-    ** being destroyed before it is finished parsing.
-    **
-    ** Note: during a reduce, the only symbols destroyed are those
-    ** which appear on the RHS of the rule, but which are not used
-    ** inside the C code.
-    */
-%%
-    default:  break;   /* If no destructor action specified: do nothing */
-  }
-}
-
-/*
-** Pop the parser's stack once.
-**
-** If there is a destructor routine associated with the token which
-** is popped from the stack, then call it.
-**
-** Return the major token number for the symbol popped.
-*/
-static int yy_pop_parser_stack(yyParser *pParser){
-  YYCODETYPE yymajor;
-  yyStackEntry *yytos = &pParser->yystack[pParser->yyidx];
-
-  /* There is no mechanism by which the parser stack can be popped below
-  ** empty in SQLite.  */
-  assert( pParser->yyidx>=0 );
-#ifndef NDEBUG
-  if( yyTraceFILE && pParser->yyidx>=0 ){
-    fprintf(yyTraceFILE,"%sPopping %s\n",
-      yyTracePrompt,
-      yyTokenName[yytos->major]);
-  }
-#endif
-  yymajor = yytos->major;
-  yy_destructor(pParser, yymajor, &yytos->minor);
-  pParser->yyidx--;
-  return yymajor;
-}
-
-/* 
-** Deallocate and destroy a parser.  Destructors are all called for
-** all stack elements before shutting the parser down.
-**
-** Inputs:
-** <ul>
-** <li>  A pointer to the parser.  This should be a pointer
-**       obtained from ParseAlloc.
-** <li>  A pointer to a function used to reclaim memory obtained
-**       from malloc.
-** </ul>
-*/
-void ParseFree(
-  void *p,                    /* The parser to be deleted */
-  void (*freeProc)(void*)     /* Function used to reclaim memory */
-){
-  yyParser *pParser = (yyParser*)p;
-  /* In SQLite, we never try to destroy a parser that was not successfully
-  ** created in the first place. */
-  if( NEVER(pParser==0) ) return;
-  while( pParser->yyidx>=0 ) yy_pop_parser_stack(pParser);
-#if YYSTACKDEPTH<=0
-  free(pParser->yystack);
-#endif
-  (*freeProc)((void*)pParser);
-}
-
-/*
-** Return the peak depth of the stack for a parser.
-*/
-#ifdef YYTRACKMAXSTACKDEPTH
-int ParseStackPeak(void *p){
-  yyParser *pParser = (yyParser*)p;
-  return pParser->yyidxMax;
-}
-#endif
-
-/*
-** Find the appropriate action for a parser given the terminal
-** look-ahead token iLookAhead.
-**
-** If the look-ahead token is YYNOCODE, then check to see if the action is
-** independent of the look-ahead.  If it is, return the action, otherwise
-** return YY_NO_ACTION.
-*/
-static int yy_find_shift_action(
-  yyParser *pParser,        /* The parser */
-  YYCODETYPE iLookAhead     /* The look-ahead token */
-){
-  int i;
-  int stateno = pParser->yystack[pParser->yyidx].stateno;
- 
-  if( stateno>=YY_MIN_REDUCE ) return stateno;
-  assert( stateno <= YY_SHIFT_COUNT );
-  i = yy_shift_ofst[stateno];
-  if( i==YY_SHIFT_USE_DFLT ) return yy_default[stateno];
-  assert( iLookAhead!=YYNOCODE );
-  i += iLookAhead;
-  if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){
-    if( iLookAhead>0 ){
-#ifdef YYFALLBACK
-      YYCODETYPE iFallback;            /* Fallback token */
-      if( iLookAhead<sizeof(yyFallback)/sizeof(yyFallback[0])
-             && (iFallback = yyFallback[iLookAhead])!=0 ){
-#ifndef NDEBUG
-        if( yyTraceFILE ){
-          fprintf(yyTraceFILE, "%sFALLBACK %s => %s\n",
-             yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[iFallback]);
-        }
-#endif
-        return yy_find_shift_action(pParser, iFallback);
-      }
-#endif
-#ifdef YYWILDCARD
-      {
-        int j = i - iLookAhead + YYWILDCARD;
-        if( 
-#if YY_SHIFT_MIN+YYWILDCARD<0
-          j>=0 &&
-#endif
-#if YY_SHIFT_MAX+YYWILDCARD>=YY_ACTTAB_COUNT
-          j<YY_ACTTAB_COUNT &&
-#endif
-          yy_lookahead[j]==YYWILDCARD
-        ){
-#ifndef NDEBUG
-          if( yyTraceFILE ){
-            fprintf(yyTraceFILE, "%sWILDCARD %s => %s\n",
-               yyTracePrompt, yyTokenName[iLookAhead], yyTokenName[YYWILDCARD]);
-          }
-#endif /* NDEBUG */
-          return yy_action[j];
-        }
-      }
-#endif /* YYWILDCARD */
-    }
-    return yy_default[stateno];
-  }else{
-    return yy_action[i];
-  }
-}
-
-/*
-** Find the appropriate action for a parser given the non-terminal
-** look-ahead token iLookAhead.
-**
-** If the look-ahead token is YYNOCODE, then check to see if the action is
-** independent of the look-ahead.  If it is, return the action, otherwise
-** return YY_NO_ACTION.
-*/
-static int yy_find_reduce_action(
-  int stateno,              /* Current state number */
-  YYCODETYPE iLookAhead     /* The look-ahead token */
-){
-  int i;
-#ifdef YYERRORSYMBOL
-  if( stateno>YY_REDUCE_COUNT ){
-    return yy_default[stateno];
-  }
-#else
-  assert( stateno<=YY_REDUCE_COUNT );
-#endif
-  i = yy_reduce_ofst[stateno];
-  assert( i!=YY_REDUCE_USE_DFLT );
-  assert( iLookAhead!=YYNOCODE );
-  i += iLookAhead;
-#ifdef YYERRORSYMBOL
-  if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){
-    return yy_default[stateno];
-  }
-#else
-  assert( i>=0 && i<YY_ACTTAB_COUNT );
-  assert( yy_lookahead[i]==iLookAhead );
-#endif
-  return yy_action[i];
-}
-
-/*
-** The following routine is called if the stack overflows.
-*/
-static void yyStackOverflow(yyParser *yypParser, YYMINORTYPE *yypMinor){
-   ParseARG_FETCH;
-   yypParser->yyidx--;
-#ifndef NDEBUG
-   if( yyTraceFILE ){
-     fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt);
-   }
-#endif
-   while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
-   /* Here code is inserted which will execute if the parser
-   ** stack every overflows */
-%%
-   ParseARG_STORE; /* Suppress warning about unused %extra_argument var */
-}
-
-/*
-** Print tracing information for a SHIFT action
-*/
-#ifndef NDEBUG
-static void yyTraceShift(yyParser *yypParser, int yyNewState){
-  if( yyTraceFILE ){
-    int i;
-    if( yyNewState<YYNSTATE ){
-      fprintf(yyTraceFILE,"%sShift %d\n",yyTracePrompt,yyNewState);
-      fprintf(yyTraceFILE,"%sStack:",yyTracePrompt);
-      for(i=1; i<=yypParser->yyidx; i++)
-        fprintf(yyTraceFILE," %s",yyTokenName[yypParser->yystack[i].major]);
-      fprintf(yyTraceFILE,"\n");
-    }else{
-      fprintf(yyTraceFILE,"%sShift *\n",yyTracePrompt);
-    }
-  }
-}
-#else
-# define yyTraceShift(X,Y)
-#endif
-
-/*
-** Perform a shift action.  Return the number of errors.
-*/
-static void yy_shift(
-  yyParser *yypParser,          /* The parser to be shifted */
-  int yyNewState,               /* The new state to shift in */
-  int yyMajor,                  /* The major token to shift in */
-  YYMINORTYPE *yypMinor         /* Pointer to the minor token to shift in */
-){
-  yyStackEntry *yytos;
-  yypParser->yyidx++;
-#ifdef YYTRACKMAXSTACKDEPTH
-  if( yypParser->yyidx>yypParser->yyidxMax ){
-    yypParser->yyidxMax = yypParser->yyidx;
-  }
-#endif
-#if YYSTACKDEPTH>0 
-  if( yypParser->yyidx>=YYSTACKDEPTH ){
-    yyStackOverflow(yypParser, yypMinor);
-    return;
-  }
-#else
-  if( yypParser->yyidx>=yypParser->yystksz ){
-    yyGrowStack(yypParser);
-    if( yypParser->yyidx>=yypParser->yystksz ){
-      yyStackOverflow(yypParser, yypMinor);
-      return;
-    }
-  }
-#endif
-  yytos = &yypParser->yystack[yypParser->yyidx];
-  yytos->stateno = (YYACTIONTYPE)yyNewState;
-  yytos->major = (YYCODETYPE)yyMajor;
-  yytos->minor = *yypMinor;
-  yyTraceShift(yypParser, yyNewState);
-}
-
-/* The following table contains information about every rule that
-** is used during the reduce.
-*/
-static const struct {
-  YYCODETYPE lhs;         /* Symbol on the left-hand side of the rule */
-  unsigned char nrhs;     /* Number of right-hand side symbols in the rule */
-} yyRuleInfo[] = {
-%%
-};
-
-static void yy_accept(yyParser*);  /* Forward Declaration */
-
-/*
-** Perform a reduce action and the shift that must immediately
-** follow the reduce.
-*/
-static void yy_reduce(
-  yyParser *yypParser,         /* The parser */
-  int yyruleno                 /* Number of the rule by which to reduce */
-){
-  int yygoto;                     /* The next state */
-  int yyact;                      /* The next action */
-  YYMINORTYPE yygotominor;        /* The LHS of the rule reduced */
-  yyStackEntry *yymsp;            /* The top of the parser's stack */
-  int yysize;                     /* Amount to pop the stack */
-  ParseARG_FETCH;
-  yymsp = &yypParser->yystack[yypParser->yyidx];
-#ifndef NDEBUG
-  if( yyTraceFILE && yyruleno>=0 
-        && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){
-    yysize = yyRuleInfo[yyruleno].nrhs;
-    fprintf(yyTraceFILE, "%sReduce [%s] -> state %d.\n", yyTracePrompt,
-      yyRuleName[yyruleno], yymsp[-yysize].stateno);
-  }
-#endif /* NDEBUG */
-
-  /* Silence complaints from purify about yygotominor being uninitialized
-  ** in some cases when it is copied into the stack after the following
-  ** switch.  yygotominor is uninitialized when a rule reduces that does
-  ** not set the value of its left-hand side nonterminal.  Leaving the
-  ** value of the nonterminal uninitialized is utterly harmless as long
-  ** as the value is never used.  So really the only thing this code
-  ** accomplishes is to quieten purify.  
-  **
-  ** 2007-01-16:  The wireshark project (www.wireshark.org) reports that
-  ** without this code, their parser segfaults.  I'm not sure what there
-  ** parser is doing to make this happen.  This is the second bug report
-  ** from wireshark this week.  Clearly they are stressing Lemon in ways
-  ** that it has not been previously stressed...  (SQLite ticket #2172)
-  */
-  /*memset(&yygotominor, 0, sizeof(yygotominor));*/
-  yygotominor = yyzerominor;
-
-
-  switch( yyruleno ){
-  /* Beginning here are the reduction cases.  A typical example
-  ** follows:
-  **   case 0:
-  **  #line <lineno> <grammarfile>
-  **     { ... }           // User supplied code
-  **  #line <lineno> <thisfile>
-  **     break;
-  */
-%%
-  };
-  assert( yyruleno>=0 && yyruleno<sizeof(yyRuleInfo)/sizeof(yyRuleInfo[0]) );
-  yygoto = yyRuleInfo[yyruleno].lhs;
-  yysize = yyRuleInfo[yyruleno].nrhs;
-  yypParser->yyidx -= yysize;
-  yyact = yy_find_reduce_action(yymsp[-yysize].stateno,(YYCODETYPE)yygoto);
-  if( yyact <= YY_MAX_SHIFTREDUCE ){
-    if( yyact>YY_MAX_SHIFT ) yyact += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE;
-    /* If the reduce action popped at least
-    ** one element off the stack, then we can push the new element back
-    ** onto the stack here, and skip the stack overflow test in yy_shift().
-    ** That gives a significant speed improvement. */
-    if( yysize ){
-      yypParser->yyidx++;
-      yymsp -= yysize-1;
-      yymsp->stateno = (YYACTIONTYPE)yyact;
-      yymsp->major = (YYCODETYPE)yygoto;
-      yymsp->minor = yygotominor;
-      yyTraceShift(yypParser, yyact);
-    }else{
-      yy_shift(yypParser,yyact,yygoto,&yygotominor);
-    }
-  }else{
-    assert( yyact == YY_ACCEPT_ACTION );
-    yy_accept(yypParser);
-  }
-}
-
-/*
-** The following code executes when the parse fails
-*/
-#ifndef YYNOERRORRECOVERY
-static void yy_parse_failed(
-  yyParser *yypParser           /* The parser */
-){
-  ParseARG_FETCH;
-#ifndef NDEBUG
-  if( yyTraceFILE ){
-    fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt);
-  }
-#endif
-  while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
-  /* Here code is inserted which will be executed whenever the
-  ** parser fails */
-%%
-  ParseARG_STORE; /* Suppress warning about unused %extra_argument variable */
-}
-#endif /* YYNOERRORRECOVERY */
-
-/*
-** The following code executes when a syntax error first occurs.
-*/
-static void yy_syntax_error(
-  yyParser *yypParser,           /* The parser */
-  int yymajor,                   /* The major type of the error token */
-  YYMINORTYPE yyminor            /* The minor type of the error token */
-){
-  ParseARG_FETCH;
-#define TOKEN (yyminor.yy0)
-%%
-  ParseARG_STORE; /* Suppress warning about unused %extra_argument variable */
-}
-
-/*
-** The following is executed when the parser accepts
-*/
-static void yy_accept(
-  yyParser *yypParser           /* The parser */
-){
-  ParseARG_FETCH;
-#ifndef NDEBUG
-  if( yyTraceFILE ){
-    fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt);
-  }
-#endif
-  while( yypParser->yyidx>=0 ) yy_pop_parser_stack(yypParser);
-  /* Here code is inserted which will be executed whenever the
-  ** parser accepts */
-%%
-  ParseARG_STORE; /* Suppress warning about unused %extra_argument variable */
-}
-
-/* The main parser program.
-** The first argument is a pointer to a structure obtained from
-** "ParseAlloc" which describes the current state of the parser.
-** The second argument is the major token number.  The third is
-** the minor token.  The fourth optional argument is whatever the
-** user wants (and specified in the grammar) and is available for
-** use by the action routines.
-**
-** Inputs:
-** <ul>
-** <li> A pointer to the parser (an opaque structure.)
-** <li> The major token number.
-** <li> The minor token number.
-** <li> An option argument of a grammar-specified type.
-** </ul>
-**
-** Outputs:
-** None.
-*/
-void Parse(
-  void *yyp,                   /* The parser */
-  int yymajor,                 /* The major token code number */
-  ParseTOKENTYPE yyminor       /* The value for the token */
-  ParseARG_PDECL               /* Optional %extra_argument parameter */
-){
-  YYMINORTYPE yyminorunion;
-  int yyact;            /* The parser action. */
-#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY)
-  int yyendofinput;     /* True if we are at the end of input */
-#endif
-#ifdef YYERRORSYMBOL
-  int yyerrorhit = 0;   /* True if yymajor has invoked an error */
-#endif
-  yyParser *yypParser;  /* The parser */
-
-  /* (re)initialize the parser, if necessary */
-  yypParser = (yyParser*)yyp;
-  if( yypParser->yyidx<0 ){
-#if YYSTACKDEPTH<=0
-    if( yypParser->yystksz <=0 ){
-      /*memset(&yyminorunion, 0, sizeof(yyminorunion));*/
-      yyminorunion = yyzerominor;
-      yyStackOverflow(yypParser, &yyminorunion);
-      return;
-    }
-#endif
-    yypParser->yyidx = 0;
-    yypParser->yyerrcnt = -1;
-    yypParser->yystack[0].stateno = 0;
-    yypParser->yystack[0].major = 0;
-  }
-  yyminorunion.yy0 = yyminor;
-#if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY)
-  yyendofinput = (yymajor==0);
-#endif
-  ParseARG_STORE;
-
-#ifndef NDEBUG
-  if( yyTraceFILE ){
-    fprintf(yyTraceFILE,"%sInput %s\n",yyTracePrompt,yyTokenName[yymajor]);
-  }
-#endif
-
-  do{
-    yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor);
-    if( yyact <= YY_MAX_SHIFTREDUCE ){
-      if( yyact > YY_MAX_SHIFT ) yyact += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE;
-      yy_shift(yypParser,yyact,yymajor,&yyminorunion);
-      yypParser->yyerrcnt--;
-      yymajor = YYNOCODE;
-    }else if( yyact <= YY_MAX_REDUCE ){
-      yy_reduce(yypParser,yyact-YY_MIN_REDUCE);
-    }else{
-      assert( yyact == YY_ERROR_ACTION );
-#ifdef YYERRORSYMBOL
-      int yymx;
-#endif
-#ifndef NDEBUG
-      if( yyTraceFILE ){
-        fprintf(yyTraceFILE,"%sSyntax Error!\n",yyTracePrompt);
-      }
-#endif
-#ifdef YYERRORSYMBOL
-      /* A syntax error has occurred.
-      ** The response to an error depends upon whether or not the
-      ** grammar defines an error token "ERROR".  
-      **
-      ** This is what we do if the grammar does define ERROR:
-      **
-      **  * Call the %syntax_error function.
-      **
-      **  * Begin popping the stack until we enter a state where
-      **    it is legal to shift the error symbol, then shift
-      **    the error symbol.
-      **
-      **  * Set the error count to three.
-      **
-      **  * Begin accepting and shifting new tokens.  No new error
-      **    processing will occur until three tokens have been
-      **    shifted successfully.
-      **
-      */
-      if( yypParser->yyerrcnt<0 ){
-        yy_syntax_error(yypParser,yymajor,yyminorunion);
-      }
-      yymx = yypParser->yystack[yypParser->yyidx].major;
-      if( yymx==YYERRORSYMBOL || yyerrorhit ){
-#ifndef NDEBUG
-        if( yyTraceFILE ){
-          fprintf(yyTraceFILE,"%sDiscard input token %s\n",
-             yyTracePrompt,yyTokenName[yymajor]);
-        }
-#endif
-        yy_destructor(yypParser, (YYCODETYPE)yymajor,&yyminorunion);
-        yymajor = YYNOCODE;
-      }else{
-         while(
-          yypParser->yyidx >= 0 &&
-          yymx != YYERRORSYMBOL &&
-          (yyact = yy_find_reduce_action(
-                        yypParser->yystack[yypParser->yyidx].stateno,
-                        YYERRORSYMBOL)) >= YY_MIN_REDUCE
-        ){
-          yy_pop_parser_stack(yypParser);
-        }
-        if( yypParser->yyidx < 0 || yymajor==0 ){
-          yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
-          yy_parse_failed(yypParser);
-          yymajor = YYNOCODE;
-        }else if( yymx!=YYERRORSYMBOL ){
-          YYMINORTYPE u2;
-          u2.YYERRSYMDT = 0;
-          yy_shift(yypParser,yyact,YYERRORSYMBOL,&u2);
-        }
-      }
-      yypParser->yyerrcnt = 3;
-      yyerrorhit = 1;
-#elif defined(YYNOERRORRECOVERY)
-      /* If the YYNOERRORRECOVERY macro is defined, then do not attempt to
-      ** do any kind of error recovery.  Instead, simply invoke the syntax
-      ** error routine and continue going as if nothing had happened.
-      **
-      ** Applications can set this macro (for example inside %include) if
-      ** they intend to abandon the parse upon the first syntax error seen.
-      */
-      yy_syntax_error(yypParser,yymajor,yyminorunion);
-      yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
-      yymajor = YYNOCODE;
-      
-#else  /* YYERRORSYMBOL is not defined */
-      /* This is what we do if the grammar does not define ERROR:
-      **
-      **  * Report an error message, and throw away the input token.
-      **
-      **  * If the input token is $, then fail the parse.
-      **
-      ** As before, subsequent error messages are suppressed until
-      ** three input tokens have been successfully shifted.
-      */
-      if( yypParser->yyerrcnt<=0 ){
-        yy_syntax_error(yypParser,yymajor,yyminorunion);
-      }
-      yypParser->yyerrcnt = 3;
-      yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion);
-      if( yyendofinput ){
-        yy_parse_failed(yypParser);
-      }
-      yymajor = YYNOCODE;
-#endif
-    }
-  }while( yymajor!=YYNOCODE && yypParser->yyidx>=0 );
-#ifndef NDEBUG
-  if( yyTraceFILE ){
-    fprintf(yyTraceFILE,"%sReturn\n",yyTracePrompt);
-  }
-#endif
-  return;
-}
diff --git a/src/main.c b/src/main.c
index 9d0b47874..f7bab9b0e 100644
--- a/src/main.c
+++ b/src/main.c
@@ -220,6 +220,12 @@ int sqlite3_initialize(void){
   if( sqlite3GlobalConfig.isInit==0 && sqlite3GlobalConfig.inProgress==0 ){
     FuncDefHash *pHash = &GLOBAL(FuncDefHash, sqlite3GlobalFunctions);
     sqlite3GlobalConfig.inProgress = 1;
+#ifdef SQLITE_ENABLE_SQLLOG
+    {
+      extern void sqlite3_init_sqllog(void);
+      sqlite3_init_sqllog();
+    }
+#endif
     memset(pHash, 0, sizeof(sqlite3GlobalFunctions));
     sqlite3RegisterGlobalFunctions();
     if( sqlite3GlobalConfig.isPCacheInit==0 ){
diff --git a/src/os_unix.c b/src/os_unix.c
index b322d238e..3d4524296 100644
--- a/src/os_unix.c
+++ b/src/os_unix.c
@@ -3349,7 +3349,7 @@ static int unixWrite(
   }
 #endif
 
-#if SQLITE_MAX_MMAP_SIZE>0
+#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
   /* Deal with as much of this write request as possible by transfering
   ** data from the memory mapping using memcpy().  */
   if( offset<pFile->mmapSize ){
@@ -4774,7 +4774,9 @@ static void unixRemapfile(
   assert( pFd->mmapSizeActual>=pFd->mmapSize );
   assert( MAP_FAILED!=0 );
 
+#ifdef SQLITE_MMAP_READWRITE
   if( (pFd->ctrlFlags & UNIXFILE_RDONLY)==0 ) flags |= PROT_WRITE;
+#endif
 
   if( pOrig ){
 #if HAVE_MREMAP
diff --git a/src/os_win.c b/src/os_win.c
index 251107528..9ae40e22a 100644
--- a/src/os_win.c
+++ b/src/os_win.c
@@ -2602,7 +2602,7 @@ static int winWrite(
            "offset=%lld, lock=%d\n", osGetCurrentProcessId(), pFile,
            pFile->h, pBuf, amt, offset, pFile->locktype));
 
-#if SQLITE_MAX_MMAP_SIZE>0
+#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
   /* Deal with as much of this write request as possible by transfering
   ** data from the memory mapping using memcpy().  */
   if( offset<pFile->mmapSize ){
@@ -4096,10 +4096,12 @@ static int winMapfile(winFile *pFd, sqlite3_int64 nByte){
     DWORD flags = FILE_MAP_READ;
 
     winUnmapfile(pFd);
+#ifdef SQLITE_MMAP_READWRITE
     if( (pFd->ctrlFlags & WINFILE_RDONLY)==0 ){
       protect = PAGE_READWRITE;
       flags |= FILE_MAP_WRITE;
     }
+#endif
 #if SQLITE_OS_WINRT
     pFd->hMap = osCreateFileMappingFromApp(pFd->h, NULL, protect, nMap, NULL);
 #elif defined(SQLITE_WIN32_HAS_WIDE)
diff --git a/src/pager.c b/src/pager.c
index b537e9e93..f633a7792 100644
--- a/src/pager.c
+++ b/src/pager.c
@@ -3392,13 +3392,22 @@ static int pagerPlaybackSavepoint(Pager *pPager, PagerSavepoint *pSavepoint){
 }
 
 /*
-** Change the maximum number of in-memory pages that are allowed.
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to recycle clean and unused pages.
 */
 void sqlite3PagerSetCachesize(Pager *pPager, int mxPage){
   sqlite3PcacheSetCachesize(pPager->pPCache, mxPage);
 }
 
 /*
+** Change the maximum number of in-memory pages that are allowed
+** before attempting to spill pages to journal.
+*/
+int sqlite3PagerSetSpillsize(Pager *pPager, int mxPage){
+  return sqlite3PcacheSetSpillsize(pPager->pPCache, mxPage);
+}
+
+/*
 ** Invoke SQLITE_FCNTL_MMAP_SIZE based on the current value of szMmap.
 */
 static void pagerFixMaplimit(Pager *pPager){
diff --git a/src/pager.h b/src/pager.h
index 9d541dede..22e73f4c7 100644
--- a/src/pager.h
+++ b/src/pager.h
@@ -123,6 +123,7 @@ void sqlite3PagerAlignReserve(Pager*,Pager*);
 #endif
 int sqlite3PagerMaxPageCount(Pager*, int);
 void sqlite3PagerSetCachesize(Pager*, int);
+int sqlite3PagerSetSpillsize(Pager*, int);
 void sqlite3PagerSetMmapLimit(Pager *, sqlite3_int64);
 void sqlite3PagerShrink(Pager*);
 void sqlite3PagerSetFlags(Pager*,unsigned);
diff --git a/src/parse.y b/src/parse.y
index 797fa9bde..6ac2be21f 100644
--- a/src/parse.y
+++ b/src/parse.y
@@ -61,6 +61,18 @@
 #define yytestcase(X) testcase(X)
 
 /*
+** Indicate that sqlite3ParserFree() will never be called with a null
+** pointer.
+*/
+#define YYPARSEFREENEVERNULL 1
+
+/*
+** Alternative datatype for the argument to the malloc() routine passed
+** into sqlite3ParserAlloc().  The default is size_t.
+*/
+#define YYMALLOCARGTYPE  u64
+
+/*
 ** An instance of this structure holds information about the
 ** LIMIT clause of a SELECT statement.
 */
@@ -162,7 +174,7 @@ create_table_args ::= AS select(S). {
   sqlite3EndTable(pParse,0,0,0,S);
   sqlite3SelectDelete(pParse->db, S);
 }
-%type table_options {u8}
+%type table_options {int}
 table_options(A) ::= .    {A = 0;}
 table_options(A) ::= WITHOUT nm(X). {
   if( X.n==5 && sqlite3_strnicmp(X.z,"rowid",5)==0 ){
@@ -364,12 +376,12 @@ defer_subclause_opt(A) ::= defer_subclause(X).  {A = X;}
 // default behavior when there is a constraint conflict.
 //
 %type onconf {int}
-%type orconf {u8}
+%type orconf {int}
 %type resolvetype {int}
 onconf(A) ::= .                              {A = OE_Default;}
 onconf(A) ::= ON CONFLICT resolvetype(X).    {A = X;}
 orconf(A) ::= .                              {A = OE_Default;}
-orconf(A) ::= OR resolvetype(X).             {A = (u8)X;}
+orconf(A) ::= OR resolvetype(X).             {A = X;}
 resolvetype(A) ::= raisetype(X).             {A = X;}
 resolvetype(A) ::= IGNORE.                   {A = OE_Ignore;}
 resolvetype(A) ::= REPLACE.                  {A = OE_Replace;}
@@ -526,7 +538,7 @@ values(A) ::= values(X) COMMA LP exprlist(Y) RP. {
 // The "distinct" nonterminal is true (1) if the DISTINCT keyword is
 // present and false (0) if it is not.
 //
-%type distinct {u16}
+%type distinct {int}
 distinct(A) ::= DISTINCT.   {A = SF_Distinct;}
 distinct(A) ::= ALL.        {A = SF_All;}
 distinct(A) ::= .           {A = 0;}
@@ -534,7 +546,7 @@ distinct(A) ::= .           {A = 0;}
 // selcollist is a list of expressions that are to become the return
 // values of the SELECT statement.  The "*" in statements like
 // "SELECT * FROM ..." is encoded as a special expression with an
-// opcode of TK_ALL.
+// opcode of TK_ASTERISK.
 //
 %type selcollist {ExprList*}
 %destructor selcollist {sqlite3ExprListDelete(pParse->db, $$);}
@@ -548,11 +560,11 @@ selcollist(A) ::= sclp(P) expr(X) as(Y).     {
    sqlite3ExprListSetSpan(pParse,A,&X);
 }
 selcollist(A) ::= sclp(P) STAR. {
-  Expr *p = sqlite3Expr(pParse->db, TK_ALL, 0);
+  Expr *p = sqlite3Expr(pParse->db, TK_ASTERISK, 0);
   A = sqlite3ExprListAppend(pParse, P, p);
 }
 selcollist(A) ::= sclp(P) nm(X) DOT STAR(Y). {
-  Expr *pRight = sqlite3PExpr(pParse, TK_ALL, 0, 0, &Y);
+  Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0, &Y);
   Expr *pLeft = sqlite3PExpr(pParse, TK_ID, 0, 0, &X);
   Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight, 0);
   A = sqlite3ExprListAppend(pParse,P, pDot);
@@ -639,7 +651,6 @@ dbnm(A) ::= DOT nm(X). {A = X;}
 fullname(A) ::= nm(X) dbnm(Y).  {A = sqlite3SrcListAppend(pParse->db,0,&X,&Y);}
 
 %type joinop {int}
-%type joinop2 {int}
 joinop(X) ::= COMMA|JOIN.              { X = JT_INNER; }
 joinop(X) ::= JOIN_KW(A) JOIN.         { X = sqlite3JoinType(pParse,&A,0,0); }
 joinop(X) ::= JOIN_KW(A) nm(B) JOIN.   { X = sqlite3JoinType(pParse,&A,&B,0); }
@@ -800,7 +811,7 @@ cmd ::= with(W) insert_cmd(R) INTO fullname(X) idlist_opt(F) DEFAULT VALUES.
   sqlite3Insert(pParse, X, 0, F, R);
 }
 
-%type insert_cmd {u8}
+%type insert_cmd {int}
 insert_cmd(A) ::= INSERT orconf(R).   {A = R;}
 insert_cmd(A) ::= REPLACE.            {A = OE_Replace;}
 
diff --git a/src/pcache.c b/src/pcache.c
index e39262cb8..5ac9d34a1 100644
--- a/src/pcache.c
+++ b/src/pcache.c
@@ -21,6 +21,7 @@ struct PCache {
   PgHdr *pSynced;                     /* Last synced page in dirty page list */
   int nRefSum;                        /* Sum of ref counts over all pages */
   int szCache;                        /* Configured cache size */
+  int szSpill;                        /* Size before spilling occurs */
   int szPage;                         /* Size of every page in this cache */
   int szExtra;                        /* Size of extra space for each page */
   u8 bPurgeable;                      /* True if pages are on backing store */
@@ -110,10 +111,8 @@ static void pcacheUnpin(PgHdr *p){
 }
 
 /*
-** Compute the number of pages of cache requested.  p->szCache is the
+** Compute the number of pages of cache requested.   p->szCache is the
 ** cache size requested by the "PRAGMA cache_size" statement.
-**
-**
 */
 static int numberOfCachePages(PCache *p){
   if( p->szCache>=0 ){
@@ -176,6 +175,7 @@ int sqlite3PcacheOpen(
   p->xStress = xStress;
   p->pStress = pStress;
   p->szCache = 100;
+  p->szSpill = 1;
   return sqlite3PcacheSetPageSize(p, szPage);
 }
 
@@ -271,32 +271,33 @@ int sqlite3PcacheFetchStress(
   PgHdr *pPg;
   if( pCache->eCreate==2 ) return 0;
 
-
-  /* Find a dirty page to write-out and recycle. First try to find a 
-  ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC
-  ** cleared), but if that is not possible settle for any other 
-  ** unreferenced dirty page.
-  */
-  for(pPg=pCache->pSynced; 
-      pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); 
-      pPg=pPg->pDirtyPrev
-  );
-  pCache->pSynced = pPg;
-  if( !pPg ){
-    for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev);
-  }
-  if( pPg ){
-    int rc;
+  if( sqlite3PcachePagecount(pCache)>pCache->szSpill ){
+    /* Find a dirty page to write-out and recycle. First try to find a 
+    ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC
+    ** cleared), but if that is not possible settle for any other 
+    ** unreferenced dirty page.
+    */
+    for(pPg=pCache->pSynced; 
+        pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); 
+        pPg=pPg->pDirtyPrev
+    );
+    pCache->pSynced = pPg;
+    if( !pPg ){
+      for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev);
+    }
+    if( pPg ){
+      int rc;
 #ifdef SQLITE_LOG_CACHE_SPILL
-    sqlite3_log(SQLITE_FULL, 
-                "spill page %d making room for %d - cache used: %d/%d",
-                pPg->pgno, pgno,
-                sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache),
+      sqlite3_log(SQLITE_FULL, 
+                  "spill page %d making room for %d - cache used: %d/%d",
+                  pPg->pgno, pgno,
+                  sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache),
                 numberOfCachePages(pCache));
 #endif
-    rc = pCache->xStress(pCache->pStress, pPg);
-    if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){
-      return rc;
+      rc = pCache->xStress(pCache->pStress, pPg);
+      if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){
+        return rc;
+      }
     }
   }
   *ppPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2);
@@ -642,6 +643,25 @@ void sqlite3PcacheSetCachesize(PCache *pCache, int mxPage){
 }
 
 /*
+** Set the suggested cache-spill value.  Make no changes if if the
+** argument is zero.  Return the effective cache-spill size, which will
+** be the larger of the szSpill and szCache.
+*/
+int sqlite3PcacheSetSpillsize(PCache *p, int mxPage){
+  int res;
+  assert( p->pCache!=0 );
+  if( mxPage ){
+    if( mxPage<0 ){
+      mxPage = (int)((-1024*(i64)mxPage)/(p->szPage+p->szExtra));
+    }
+    p->szSpill = mxPage;
+  }
+  res = numberOfCachePages(p);
+  if( res<p->szSpill ) res = p->szSpill; 
+  return res;
+}
+
+/*
 ** Free up as much memory as possible from the page cache.
 */
 void sqlite3PcacheShrink(PCache *pCache){
diff --git a/src/pcache.h b/src/pcache.h
index a0724df22..42c44cf7b 100644
--- a/src/pcache.h
+++ b/src/pcache.h
@@ -146,6 +146,13 @@ void sqlite3PcacheSetCachesize(PCache *, int);
 int sqlite3PcacheGetCachesize(PCache *);
 #endif
 
+/* Set or get the suggested spill-size for the specified pager-cache.
+**
+** The spill-size is the minimum number of pages in cache before the cache
+** will attempt to spill dirty pages by calling xStress.
+*/
+int sqlite3PcacheSetSpillsize(PCache *, int);
+
 /* Free up as much memory as possible from the page cache */
 void sqlite3PcacheShrink(PCache*);
 
diff --git a/src/pragma.c b/src/pragma.c
index 14c481174..0d48057d2 100644
--- a/src/pragma.c
+++ b/src/pragma.c
@@ -279,7 +279,7 @@ const char *sqlite3JournalModename(int eMode){
 **
 ** Pragmas are of this form:
 **
-**      PRAGMA [database.]id [= value]
+**      PRAGMA [schema.]id [= value]
 **
 ** The identifier might also be a string.  The value is a string, and
 ** identifier, or a number.  If minusFlag is true, then the value is
@@ -291,8 +291,8 @@ const char *sqlite3JournalModename(int eMode){
 */
 void sqlite3Pragma(
   Parse *pParse, 
-  Token *pId1,        /* First part of [database.]id field */
-  Token *pId2,        /* Second part of [database.]id field, or NULL */
+  Token *pId1,        /* First part of [schema.]id field */
+  Token *pId2,        /* Second part of [schema.]id field, or NULL */
   Token *pValue,      /* Token for <value>, or NULL */
   int minusFlag       /* True if a '-' sign preceded <value> */
 ){
@@ -313,7 +313,7 @@ void sqlite3Pragma(
   sqlite3VdbeRunOnlyOnce(v);
   pParse->nMem = 2;
 
-  /* Interpret the [database.] part of the pragma statement. iDb is the
+  /* Interpret the [schema.] part of the pragma statement. iDb is the
   ** index of the database this pragma is being applied to in db.aDb[]. */
   iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
   if( iDb<0 ) return;
@@ -402,8 +402,8 @@ void sqlite3Pragma(
   
 #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED)
   /*
-  **  PRAGMA [database.]default_cache_size
-  **  PRAGMA [database.]default_cache_size=N
+  **  PRAGMA [schema.]default_cache_size
+  **  PRAGMA [schema.]default_cache_size=N
   **
   ** The first form reports the current persistent setting for the
   ** page cache size.  The value returned is the maximum number of
@@ -454,8 +454,8 @@ void sqlite3Pragma(
 
 #if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
   /*
-  **  PRAGMA [database.]page_size
-  **  PRAGMA [database.]page_size=N
+  **  PRAGMA [schema.]page_size
+  **  PRAGMA [schema.]page_size=N
   **
   ** The first form reports the current setting for the
   ** database page size in bytes.  The second form sets the
@@ -481,8 +481,8 @@ void sqlite3Pragma(
   }
 
   /*
-  **  PRAGMA [database.]secure_delete
-  **  PRAGMA [database.]secure_delete=ON/OFF
+  **  PRAGMA [schema.]secure_delete
+  **  PRAGMA [schema.]secure_delete=ON/OFF
   **
   ** The first form reports the current setting for the
   ** secure_delete flag.  The second form changes the secure_delete
@@ -507,8 +507,8 @@ void sqlite3Pragma(
   }
 
   /*
-  **  PRAGMA [database.]max_page_count
-  **  PRAGMA [database.]max_page_count=N
+  **  PRAGMA [schema.]max_page_count
+  **  PRAGMA [schema.]max_page_count=N
   **
   ** The first form reports the current setting for the
   ** maximum number of pages in the database file.  The 
@@ -519,7 +519,7 @@ void sqlite3Pragma(
   ** change.  The only purpose is to provide an easy way to test
   ** the sqlite3AbsInt32() function.
   **
-  **  PRAGMA [database.]page_count
+  **  PRAGMA [schema.]page_count
   **
   ** Return the number of pages in the specified database.
   */
@@ -540,8 +540,8 @@ void sqlite3Pragma(
   }
 
   /*
-  **  PRAGMA [database.]locking_mode
-  **  PRAGMA [database.]locking_mode = (normal|exclusive)
+  **  PRAGMA [schema.]locking_mode
+  **  PRAGMA [schema.]locking_mode = (normal|exclusive)
   */
   case PragTyp_LOCKING_MODE: {
     const char *zRet = "normal";
@@ -586,8 +586,8 @@ void sqlite3Pragma(
   }
 
   /*
-  **  PRAGMA [database.]journal_mode
-  **  PRAGMA [database.]journal_mode =
+  **  PRAGMA [schema.]journal_mode
+  **  PRAGMA [schema.]journal_mode =
   **                      (delete|persist|off|truncate|memory|wal|off)
   */
   case PragTyp_JOURNAL_MODE: {
@@ -627,8 +627,8 @@ void sqlite3Pragma(
   }
 
   /*
-  **  PRAGMA [database.]journal_size_limit
-  **  PRAGMA [database.]journal_size_limit=N
+  **  PRAGMA [schema.]journal_size_limit
+  **  PRAGMA [schema.]journal_size_limit=N
   **
   ** Get or set the size limit on rollback journal files.
   */
@@ -647,8 +647,8 @@ void sqlite3Pragma(
 #endif /* SQLITE_OMIT_PAGER_PRAGMAS */
 
   /*
-  **  PRAGMA [database.]auto_vacuum
-  **  PRAGMA [database.]auto_vacuum=N
+  **  PRAGMA [schema.]auto_vacuum
+  **  PRAGMA [schema.]auto_vacuum=N
   **
   ** Get or set the value of the database 'auto-vacuum' parameter.
   ** The value is one of:  0 NONE 1 FULL 2 INCREMENTAL
@@ -699,7 +699,7 @@ void sqlite3Pragma(
 #endif
 
   /*
-  **  PRAGMA [database.]incremental_vacuum(N)
+  **  PRAGMA [schema.]incremental_vacuum(N)
   **
   ** Do N steps of incremental vacuuming on a database.
   */
@@ -722,8 +722,8 @@ void sqlite3Pragma(
 
 #ifndef SQLITE_OMIT_PAGER_PRAGMAS
   /*
-  **  PRAGMA [database.]cache_size
-  **  PRAGMA [database.]cache_size=N
+  **  PRAGMA [schema.]cache_size
+  **  PRAGMA [schema.]cache_size=N
   **
   ** The first form reports the current local setting for the
   ** page cache size. The second form sets the local
@@ -735,19 +735,60 @@ void sqlite3Pragma(
   case PragTyp_CACHE_SIZE: {
     assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
     if( !zRight ){
-      if( sqlite3ReadSchema(pParse) ) goto pragma_out;
       returnSingleInt(v, "cache_size", pDb->pSchema->cache_size);
     }else{
       int size = sqlite3Atoi(zRight);
       pDb->pSchema->cache_size = size;
       sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
-      if( sqlite3ReadSchema(pParse) ) goto pragma_out;
     }
     break;
   }
 
   /*
-  **  PRAGMA [database.]mmap_size(N)
+  **  PRAGMA [schema.]cache_spill
+  **  PRAGMA cache_spill=BOOLEAN
+  **  PRAGMA [schema.]cache_spill=N
+  **
+  ** The first form reports the current local setting for the
+  ** page cache spill size. The second form turns cache spill on
+  ** or off.  When turnning cache spill on, the size is set to the
+  ** current cache_size.  The third form sets a spill size that
+  ** may be different form the cache size.
+  ** If N is positive then that is the
+  ** number of pages in the cache.  If N is negative, then the
+  ** number of pages is adjusted so that the cache uses -N kibibytes
+  ** of memory.
+  **
+  ** If the number of cache_spill pages is less then the number of
+  ** cache_size pages, no spilling occurs until the page count exceeds
+  ** the number of cache_size pages.
+  **
+  ** The cache_spill=BOOLEAN setting applies to all attached schemas,
+  ** not just the schema specified.
+  */
+  case PragTyp_CACHE_SPILL: {
+    assert( sqlite3SchemaMutexHeld(db, iDb, 0) );
+    if( !zRight ){
+      returnSingleInt(v, "cache_spill", 
+         (db->flags & SQLITE_CacheSpill)==0 ? 0 : 
+            sqlite3BtreeSetSpillSize(pDb->pBt,0));
+    }else{
+      int size = 1;
+      if( sqlite3GetInt32(zRight, &size) ){
+        sqlite3BtreeSetSpillSize(pDb->pBt, size);
+      }
+      if( sqlite3GetBoolean(zRight, size!=0) ){
+        db->flags |= SQLITE_CacheSpill;
+      }else{
+        db->flags &= ~SQLITE_CacheSpill;
+      }
+      setAllPagerFlags(db);
+    }
+    break;
+  }
+
+  /*
+  **  PRAGMA [schema.]mmap_size(N)
   **
   ** Used to set mapping size limit. The mapping size limit is
   ** used to limit the aggregate size of all memory mapped regions of the
@@ -891,8 +932,8 @@ void sqlite3Pragma(
 
 #if SQLITE_ENABLE_LOCKING_STYLE
   /*
-  **   PRAGMA [database.]lock_proxy_file
-  **   PRAGMA [database.]lock_proxy_file = ":auto:"|"lock_file_path"
+  **   PRAGMA [schema.]lock_proxy_file
+  **   PRAGMA [schema.]lock_proxy_file = ":auto:"|"lock_file_path"
   **
   ** Return or set the value of the lock_proxy_file flag.  Changing
   ** the value sets a specific file to be used for database access locks.
@@ -927,8 +968,8 @@ void sqlite3Pragma(
 #endif /* SQLITE_ENABLE_LOCKING_STYLE */      
     
   /*
-  **   PRAGMA [database.]synchronous
-  **   PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
+  **   PRAGMA [schema.]synchronous
+  **   PRAGMA [schema.]synchronous=OFF|ON|NORMAL|FULL
   **
   ** Return or set the local value of the synchronous flag.  Changing
   ** the local value does not make changes to the disk file and the
@@ -1324,7 +1365,7 @@ void sqlite3Pragma(
   case PragTyp_PARSER_TRACE: {
     if( zRight ){
       if( sqlite3GetBoolean(zRight, 0) ){
-        sqlite3ParserTrace(stderr, "parser: ");
+        sqlite3ParserTrace(stdout, "parser: ");
       }else{
         sqlite3ParserTrace(0, 0);
       }
@@ -1644,16 +1685,16 @@ void sqlite3Pragma(
 
 #ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
   /*
-  **   PRAGMA [database.]schema_version
-  **   PRAGMA [database.]schema_version = <integer>
+  **   PRAGMA [schema.]schema_version
+  **   PRAGMA [schema.]schema_version = <integer>
   **
-  **   PRAGMA [database.]user_version
-  **   PRAGMA [database.]user_version = <integer>
+  **   PRAGMA [schema.]user_version
+  **   PRAGMA [schema.]user_version = <integer>
   **
-  **   PRAGMA [database.]freelist_count = <integer>
+  **   PRAGMA [schema.]freelist_count = <integer>
   **
-  **   PRAGMA [database.]application_id
-  **   PRAGMA [database.]application_id = <integer>
+  **   PRAGMA [schema.]application_id
+  **   PRAGMA [schema.]application_id = <integer>
   **
   ** The pragma's schema_version and user_version are used to set or get
   ** the value of the schema-version and user-version, respectively. Both
@@ -1728,7 +1769,7 @@ void sqlite3Pragma(
 
 #ifndef SQLITE_OMIT_WAL
   /*
-  **   PRAGMA [database.]wal_checkpoint = passive|full|restart|truncate
+  **   PRAGMA [schema.]wal_checkpoint = passive|full|restart|truncate
   **
   ** Checkpoint the database.
   */
diff --git a/src/pragma.h b/src/pragma.h
index 9e206dac4..24a6c9d71 100644
--- a/src/pragma.h
+++ b/src/pragma.h
@@ -8,43 +8,44 @@
 #define PragTyp_FLAG                           2
 #define PragTyp_BUSY_TIMEOUT                   3
 #define PragTyp_CACHE_SIZE                     4
-#define PragTyp_CASE_SENSITIVE_LIKE            5
-#define PragTyp_COLLATION_LIST                 6
-#define PragTyp_COMPILE_OPTIONS                7
-#define PragTyp_DATA_STORE_DIRECTORY           8
-#define PragTyp_DATABASE_LIST                  9
-#define PragTyp_DEFAULT_CACHE_SIZE            10
-#define PragTyp_ENCODING                      11
-#define PragTyp_FOREIGN_KEY_CHECK             12
-#define PragTyp_FOREIGN_KEY_LIST              13
-#define PragTyp_INCREMENTAL_VACUUM            14
-#define PragTyp_INDEX_INFO                    15
-#define PragTyp_INDEX_LIST                    16
-#define PragTyp_INTEGRITY_CHECK               17
-#define PragTyp_JOURNAL_MODE                  18
-#define PragTyp_JOURNAL_SIZE_LIMIT            19
-#define PragTyp_LOCK_PROXY_FILE               20
-#define PragTyp_LOCKING_MODE                  21
-#define PragTyp_PAGE_COUNT                    22
-#define PragTyp_MMAP_SIZE                     23
-#define PragTyp_PAGE_SIZE                     24
-#define PragTyp_SECURE_DELETE                 25
-#define PragTyp_SHRINK_MEMORY                 26
-#define PragTyp_SOFT_HEAP_LIMIT               27
-#define PragTyp_STATS                         28
-#define PragTyp_SYNCHRONOUS                   29
-#define PragTyp_TABLE_INFO                    30
-#define PragTyp_TEMP_STORE                    31
-#define PragTyp_TEMP_STORE_DIRECTORY          32
-#define PragTyp_THREADS                       33
-#define PragTyp_WAL_AUTOCHECKPOINT            34
-#define PragTyp_WAL_CHECKPOINT                35
-#define PragTyp_ACTIVATE_EXTENSIONS           36
-#define PragTyp_HEXKEY                        37
-#define PragTyp_KEY                           38
-#define PragTyp_REKEY                         39
-#define PragTyp_LOCK_STATUS                   40
-#define PragTyp_PARSER_TRACE                  41
+#define PragTyp_CACHE_SPILL                    5
+#define PragTyp_CASE_SENSITIVE_LIKE            6
+#define PragTyp_COLLATION_LIST                 7
+#define PragTyp_COMPILE_OPTIONS                8
+#define PragTyp_DATA_STORE_DIRECTORY           9
+#define PragTyp_DATABASE_LIST                 10
+#define PragTyp_DEFAULT_CACHE_SIZE            11
+#define PragTyp_ENCODING                      12
+#define PragTyp_FOREIGN_KEY_CHECK             13
+#define PragTyp_FOREIGN_KEY_LIST              14
+#define PragTyp_INCREMENTAL_VACUUM            15
+#define PragTyp_INDEX_INFO                    16
+#define PragTyp_INDEX_LIST                    17
+#define PragTyp_INTEGRITY_CHECK               18
+#define PragTyp_JOURNAL_MODE                  19
+#define PragTyp_JOURNAL_SIZE_LIMIT            20
+#define PragTyp_LOCK_PROXY_FILE               21
+#define PragTyp_LOCKING_MODE                  22
+#define PragTyp_PAGE_COUNT                    23
+#define PragTyp_MMAP_SIZE                     24
+#define PragTyp_PAGE_SIZE                     25
+#define PragTyp_SECURE_DELETE                 26
+#define PragTyp_SHRINK_MEMORY                 27
+#define PragTyp_SOFT_HEAP_LIMIT               28
+#define PragTyp_STATS                         29
+#define PragTyp_SYNCHRONOUS                   30
+#define PragTyp_TABLE_INFO                    31
+#define PragTyp_TEMP_STORE                    32
+#define PragTyp_TEMP_STORE_DIRECTORY          33
+#define PragTyp_THREADS                       34
+#define PragTyp_WAL_AUTOCHECKPOINT            35
+#define PragTyp_WAL_CHECKPOINT                36
+#define PragTyp_ACTIVATE_EXTENSIONS           37
+#define PragTyp_HEXKEY                        38
+#define PragTyp_KEY                           39
+#define PragTyp_REKEY                         40
+#define PragTyp_LOCK_STATUS                   41
+#define PragTyp_PARSER_TRACE                  42
 #define PragFlag_NeedSchema           0x01
 #define PragFlag_ReadOnly             0x02
 static const struct sPragmaNames {
@@ -86,14 +87,14 @@ static const struct sPragmaNames {
 #if !defined(SQLITE_OMIT_PAGER_PRAGMAS)
   { /* zName:     */ "cache_size",
     /* ePragTyp:  */ PragTyp_CACHE_SIZE,
-    /* ePragFlag: */ 0,
+    /* ePragFlag: */ PragFlag_NeedSchema,
     /* iArg:      */ 0 },
 #endif
 #if !defined(SQLITE_OMIT_FLAG_PRAGMAS)
   { /* zName:     */ "cache_spill",
-    /* ePragTyp:  */ PragTyp_FLAG,
+    /* ePragTyp:  */ PragTyp_CACHE_SPILL,
     /* ePragFlag: */ 0,
-    /* iArg:      */ SQLITE_CacheSpill },
+    /* iArg:      */ 0 },
 #endif
   { /* zName:     */ "case_sensitive_like",
     /* ePragTyp:  */ PragTyp_CASE_SENSITIVE_LIKE,
diff --git a/src/printf.c b/src/printf.c
index dba928d10..9caeef8ff 100644
--- a/src/printf.c
+++ b/src/printf.c
@@ -726,7 +726,7 @@ void sqlite3VXPrintf(
     if( width>0 && flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
 
     if( zExtra ){
-      sqlite3_free(zExtra);
+      sqlite3DbFree(pAccum->db, zExtra);
       zExtra = 0;
     }
   }/* End for loop over the format string */
diff --git a/src/select.c b/src/select.c
index 8db983891..3d69dfb03 100644
--- a/src/select.c
+++ b/src/select.c
@@ -118,7 +118,7 @@ Select *sqlite3SelectNew(
     memset(pNew, 0, sizeof(*pNew));
   }
   if( pEList==0 ){
-    pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ALL,0));
+    pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ASTERISK,0));
   }
   pNew->pEList = pEList;
   if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc));
@@ -1596,13 +1596,15 @@ int sqlite3ColumnsFromExprList(
 ){
   sqlite3 *db = pParse->db;   /* Database connection */
   int i, j;                   /* Loop counters */
-  int cnt;                    /* Index added to make the name unique */
+  u32 cnt;                    /* Index added to make the name unique */
   Column *aCol, *pCol;        /* For looping over result columns */
   int nCol;                   /* Number of columns in the result set */
   Expr *p;                    /* Expression for a single result column */
   char *zName;                /* Column name */
   int nName;                  /* Size of name in zName[] */
+  Hash ht;                    /* Hash table of column names */
 
+  sqlite3HashInit(&ht);
   if( pEList ){
     nCol = pEList->nExpr;
     aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol);
@@ -1614,13 +1616,12 @@ int sqlite3ColumnsFromExprList(
   *pnCol = nCol;
   *paCol = aCol;
 
-  for(i=0, pCol=aCol; i<nCol; i++, pCol++){
+  for(i=0, pCol=aCol; i<nCol && !db->mallocFailed; i++, pCol++){
     /* Get an appropriate name for the column
     */
     p = sqlite3ExprSkipCollate(pEList->a[i].pExpr);
     if( (zName = pEList->a[i].zName)!=0 ){
       /* If the column contains an "AS <name>" phrase, use <name> as the name */
-      zName = sqlite3DbStrDup(db, zName);
     }else{
       Expr *pColExpr = p;  /* The expression that is the result column name */
       Table *pTab;         /* Table associated with this expression */
@@ -1633,41 +1634,37 @@ int sqlite3ColumnsFromExprList(
         int iCol = pColExpr->iColumn;
         pTab = pColExpr->pTab;
         if( iCol<0 ) iCol = pTab->iPKey;
-        zName = sqlite3MPrintf(db, "%s",
-                 iCol>=0 ? pTab->aCol[iCol].zName : "rowid");
+        zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid";
       }else if( pColExpr->op==TK_ID ){
         assert( !ExprHasProperty(pColExpr, EP_IntValue) );
-        zName = sqlite3MPrintf(db, "%s", pColExpr->u.zToken);
+        zName = pColExpr->u.zToken;
       }else{
         /* Use the original text of the column expression as its name */
-        zName = sqlite3MPrintf(db, "%s", pEList->a[i].zSpan);
+        zName = pEList->a[i].zSpan;
       }
     }
-    if( db->mallocFailed ){
-      sqlite3DbFree(db, zName);
-      break;
-    }
+    zName = sqlite3MPrintf(db, "%s", zName);
 
     /* Make sure the column name is unique.  If the name is not unique,
     ** append an integer to the name so that it becomes unique.
     */
-    nName = sqlite3Strlen30(zName);
-    for(j=cnt=0; j<i; j++){
-      if( sqlite3StrICmp(aCol[j].zName, zName)==0 ){
-        char *zNewName;
-        int k;
-        for(k=nName-1; k>1 && sqlite3Isdigit(zName[k]); k--){}
-        if( k>=0 && zName[k]==':' ) nName = k;
-        zName[nName] = 0;
-        zNewName = sqlite3MPrintf(db, "%s:%d", zName, ++cnt);
-        sqlite3DbFree(db, zName);
-        zName = zNewName;
-        j = -1;
-        if( zName==0 ) break;
+    cnt = 0;
+    while( zName && sqlite3HashFind(&ht, zName)!=0 ){
+      nName = sqlite3Strlen30(zName);
+      if( nName>0 ){
+        for(j=nName-1; j>0 && sqlite3Isdigit(zName[j]); j--){}
+        if( zName[j]==':' ) nName = j;
       }
+      zName = sqlite3MPrintf(db, "%.*z:%u", nName, zName, ++cnt);
+      if( cnt>3 ) sqlite3_randomness(sizeof(cnt), &cnt);
     }
     pCol->zName = zName;
+    sqlite3ColumnPropertiesFromName(0, pCol);
+    if( zName && sqlite3HashInsert(&ht, zName, pCol)==pCol ){
+      db->mallocFailed = 1;
+    }
   }
+  sqlite3HashClear(&ht);
   if( db->mallocFailed ){
     for(j=0; j<i; j++){
       sqlite3DbFree(db, aCol[j].zName);
@@ -3941,7 +3938,7 @@ static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){
   if( pNewSrc==0 ) return WRC_Abort;
   *pNew = *p;
   p->pSrc = pNewSrc;
-  p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ALL, 0));
+  p->pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ASTERISK, 0));
   p->op = TK_SELECT;
   p->pWhere = 0;
   pNew->pGroupBy = 0;
@@ -3972,7 +3969,7 @@ static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){
 ** object that the returned CTE belongs to.
 */
 static struct Cte *searchWith(
-  With *pWith,                    /* Current outermost WITH clause */
+  With *pWith,                    /* Current innermost WITH clause */
   struct SrcList_item *pItem,     /* FROM clause element to resolve */
   With **ppContext                /* OUT: WITH clause return value belongs to */
 ){
@@ -4003,11 +4000,12 @@ static struct Cte *searchWith(
 ** statement with which it is associated.
 */
 void sqlite3WithPush(Parse *pParse, With *pWith, u8 bFree){
-  assert( bFree==0 || pParse->pWith==0 );
+  assert( bFree==0 || (pParse->pWith==0 && pParse->pWithToFree==0) );
   if( pWith ){
+    assert( pParse->pWith!=pWith );
     pWith->pOuter = pParse->pWith;
     pParse->pWith = pWith;
-    pParse->bFreeWith = bFree;
+    if( bFree ) pParse->pWithToFree = pWith;
   }
 }
 
@@ -4100,6 +4098,7 @@ static int withExpand(
     pSavedWith = pParse->pWith;
     pParse->pWith = pWith;
     sqlite3WalkSelect(pWalker, bMayRecursive ? pSel->pPrior : pSel);
+    pParse->pWith = pWith;
 
     for(pLeft=pSel; pLeft->pPrior; pLeft=pLeft->pPrior);
     pEList = pLeft->pEList;
@@ -4280,19 +4279,20 @@ static int selectExpander(Walker *pWalker, Select *p){
   /* For every "*" that occurs in the column list, insert the names of
   ** all columns in all tables.  And for every TABLE.* insert the names
   ** of all columns in TABLE.  The parser inserted a special expression
-  ** with the TK_ALL operator for each "*" that it found in the column list.
-  ** The following code just has to locate the TK_ALL expressions and expand
-  ** each one to the list of all columns in all tables.
+  ** with the TK_ASTERISK operator for each "*" that it found in the column
+  ** list.  The following code just has to locate the TK_ASTERISK
+  ** expressions and expand each one to the list of all columns in
+  ** all tables.
   **
   ** The first loop just checks to see if there are any "*" operators
   ** that need expanding.
   */
   for(k=0; k<pEList->nExpr; k++){
     pE = pEList->a[k].pExpr;
-    if( pE->op==TK_ALL ) break;
+    if( pE->op==TK_ASTERISK ) break;
     assert( pE->op!=TK_DOT || pE->pRight!=0 );
     assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) );
-    if( pE->op==TK_DOT && pE->pRight->op==TK_ALL ) break;
+    if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break;
   }
   if( k<pEList->nExpr ){
     /*
@@ -4310,7 +4310,9 @@ static int selectExpander(Walker *pWalker, Select *p){
       pE = a[k].pExpr;
       pRight = pE->pRight;
       assert( pE->op!=TK_DOT || pRight!=0 );
-      if( pE->op!=TK_ALL && (pE->op!=TK_DOT || pRight->op!=TK_ALL) ){
+      if( pE->op!=TK_ASTERISK
+       && (pE->op!=TK_DOT || pRight->op!=TK_ASTERISK)
+      ){
         /* This particular expression does not need to be expanded.
         */
         pNew = sqlite3ExprListAppend(pParse, pNew, a[k].pExpr);
@@ -4362,12 +4364,13 @@ static int selectExpander(Walker *pWalker, Select *p){
               continue;
             }
 
-            /* If a column is marked as 'hidden' (currently only possible
-            ** for virtual tables), do not include it in the expanded
-            ** result-set list.
+            /* If a column is marked as 'hidden', omit it from the expanded
+            ** result-set list unless the SELECT has the SF_IncludeHidden
+            ** bit set.
             */
-            if( IsHiddenColumn(&pTab->aCol[j]) ){
-              assert(IsVirtual(pTab));
+            if( (p->selFlags & SF_IncludeHidden)==0
+             && IsHiddenColumn(&pTab->aCol[j]) 
+            ){
               continue;
             }
             tableSeen = 1;
diff --git a/src/shell.c b/src/shell.c
index ec76eeea9..7822919ec 100644
--- a/src/shell.c
+++ b/src/shell.c
@@ -165,7 +165,7 @@ static sqlite3_int64 timeOfDay(void){
   static sqlite3_vfs *clockVfs = 0;
   sqlite3_int64 t;
   if( clockVfs==0 ) clockVfs = sqlite3_vfs_find(0);
-  if( clockVfs->iVersion>=1 && clockVfs->xCurrentTimeInt64!=0 ){
+  if( clockVfs->iVersion>=2 && clockVfs->xCurrentTimeInt64!=0 ){
     clockVfs->xCurrentTimeInt64(clockVfs, &t);
   }else{
     double r;
@@ -2649,7 +2649,7 @@ static int shell_dbinfo_command(ShellState *p, int nArg, char **azArg){
      { "schema size:",
        "SELECT total(length(sql)) FROM %s" },
   };
-  sqlite3_file *pFile;
+  sqlite3_file *pFile = 0;
   int i;
   char *zSchemaTab;
   char *zDb = nArg>=2 ? azArg[1] : "main";
@@ -4882,10 +4882,10 @@ int SQLITE_CDECL main(int argc, char **argv){
       int n, sz;
       sz = (int)integerValue(cmdline_option_value(argc,argv,++i));
       if( sz>70000 ) sz = 70000;
-      if( sz<800 ) sz = 800;
+      if( sz<0 ) sz = 0;
       n = (int)integerValue(cmdline_option_value(argc,argv,++i));
-      if( n<10 ) n = 10;
-      sqlite3_config(SQLITE_CONFIG_PAGECACHE, malloc(n*sz+1), sz, n);
+      sqlite3_config(SQLITE_CONFIG_PAGECACHE,
+                    (n>0 && sz>0) ? malloc(n*sz) : 0, sz, n);
       data.shellFlgs |= SHFLG_Pagecache;
     }else if( strcmp(z,"-lookaside")==0 ){
       int n, sz;
diff --git a/src/sqlite.h.in b/src/sqlite.h.in
index ff5cf27ec..c0bed1336 100644
--- a/src/sqlite.h.in
+++ b/src/sqlite.h.in
@@ -1599,29 +1599,34 @@ struct sqlite3_mem_methods {
 ** </dd>
 **
 ** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
 ** that SQLite can use for the database page cache with the default page
 ** cache implementation.  
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
-** configuration option.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
 ** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned
-** memory, the size of each page buffer (sz), and the number of pages (N).
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
 ** The sz argument should be the size of the largest database page
 ** (a power of two between 512 and 65536) plus some extra bytes for each
 ** page header.  ^The number of extra bytes needed by the page header
-** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option 
-** to [sqlite3_config()].
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
 ** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary.  The first
-** argument should pointer to an 8-byte aligned block of memory that
-** is at least sz*N bytes of memory, otherwise subsequent behavior is
-** undefined.
-** ^SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache.  ^If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
+** for the sz parameter to be larger than necessary.  The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
 **
 ** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
 ** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer 
diff --git a/src/sqliteInt.h b/src/sqliteInt.h
index 3b86e49ed..0f02c5052 100644
--- a/src/sqliteInt.h
+++ b/src/sqliteInt.h
@@ -527,7 +527,6 @@
 # define SQLITE_DEFAULT_PCACHE_INITSZ 100
 #endif
 
-
 /*
 ** GCC does not define the offsetof() macro so we'll have to do it
 ** ourselves.
@@ -1682,7 +1681,7 @@ struct Table {
 /*
 ** Allowed values for Table.tabFlags.
 **
-** TF_OOOHidden applies to virtual tables that have hidden columns that are
+** TF_OOOHidden applies to tables or view that have hidden columns that are
 ** followed by non-hidden columns.  Example:  "CREATE VIRTUAL TABLE x USING
 ** vtab1(a HIDDEN, b);".  Since "b" is a non-hidden column but "a" is hidden,
 ** the TF_OOOHidden attribute would apply in this case.  Such tables require
@@ -1705,12 +1704,28 @@ struct Table {
 */
 #ifndef SQLITE_OMIT_VIRTUALTABLE
 #  define IsVirtual(X)      (((X)->tabFlags & TF_Virtual)!=0)
-#  define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
 #else
 #  define IsVirtual(X)      0
-#  define IsHiddenColumn(X) 0
 #endif
 
+/*
+** Macros to determine if a column is hidden.  IsOrdinaryHiddenColumn()
+** only works for non-virtual tables (ordinary tables and views) and is
+** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined.  The
+** IsHiddenColumn() macro is general purpose.
+*/
+#if defined(SQLITE_ENABLE_HIDDEN_COLUMNS)
+#  define IsHiddenColumn(X)         (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+#  define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+#elif !defined(SQLITE_OMIT_VIRTUALTABLE)
+#  define IsHiddenColumn(X)         (((X)->colFlags & COLFLAG_HIDDEN)!=0)
+#  define IsOrdinaryHiddenColumn(X) 0
+#else
+#  define IsHiddenColumn(X)         0
+#  define IsOrdinaryHiddenColumn(X) 0
+#endif
+
+
 /* Does the table have a rowid */
 #define HasRowid(X)     (((X)->tabFlags & TF_WithoutRowid)==0)
 #define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0)
@@ -2504,6 +2519,7 @@ struct Select {
 #define SF_MinMaxAgg       0x1000  /* Aggregate containing min() or max() */
 #define SF_Recursive       0x2000  /* The recursive part of a recursive CTE */
 #define SF_Converted       0x4000  /* By convertCompoundSelectToSubquery() */
+#define SF_IncludeHidden   0x8000  /* Include hidden columns in output */
 
 
 /*
@@ -2762,7 +2778,6 @@ struct Parse {
   int nVar;                 /* Number of '?' variables seen in the SQL so far */
   int nzVar;                /* Number of available slots in azVar[] */
   u8 iPkSortOrder;          /* ASC or DESC for INTEGER PRIMARY KEY */
-  u8 bFreeWith;             /* True if pWith should be freed with parser */
   u8 explain;               /* True if the EXPLAIN flag is found on the query */
 #ifndef SQLITE_OMIT_VIRTUALTABLE
   u8 declareVtab;           /* True if inside sqlite3_declare_vtab() */
@@ -2789,6 +2804,7 @@ struct Parse {
   Table *pZombieTab;        /* List of Table objects to delete after code gen */
   TriggerPrg *pTriggerPrg;  /* Linked list of coded triggers */
   With *pWith;              /* Current WITH clause, or NULL */
+  With *pWithToFree;        /* Free this WITH object at the end of the parse */
 };
 
 /*
@@ -3283,6 +3299,7 @@ char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
   void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
   void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
   void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
+  void sqlite3TreeViewWith(TreeView*, const With*, u8);
 #endif
 
 
@@ -3326,6 +3343,7 @@ void sqlite3OpenMasterTable(Parse *, int);
 Index *sqlite3PrimaryKeyIndex(Table*);
 i16 sqlite3ColumnOfIndex(Index*, i16);
 void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
+void sqlite3ColumnPropertiesFromName(Table*, Column*);
 void sqlite3AddColumn(Parse*,Token*);
 void sqlite3AddNotNull(Parse*, int);
 void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
diff --git a/src/test1.c b/src/test1.c
index 7ce4ed5a5..186e4e468 100644
--- a/src/test1.c
+++ b/src/test1.c
@@ -2226,6 +2226,49 @@ static int test_stmt_scanstatus_reset(
 }
 #endif
 
+#ifdef SQLITE_ENABLE_SQLLOG
+/*
+** Usage:  sqlite3_config_sqllog
+**
+** Zero the SQLITE_CONFIG_SQLLOG configuration
+*/
+static int test_config_sqllog(
+  void * clientData,
+  Tcl_Interp *interp,
+  int objc,
+  Tcl_Obj *CONST objv[]
+){
+  if( objc!=1 ){
+    Tcl_WrongNumArgs(interp, 1, objv, "");
+    return TCL_ERROR;
+  }
+  sqlite3_config(SQLITE_CONFIG_SQLLOG, 0, 0);
+  return TCL_OK;
+}
+#endif
+
+/*
+** Usage: vfs_current_time_int64
+**
+** Return the value returned by the default VFS's xCurrentTimeInt64 method.
+*/
+static int vfsCurrentTimeInt64(
+  void * clientData,
+  Tcl_Interp *interp,
+  int objc,
+  Tcl_Obj *CONST objv[]
+){
+  i64 t;
+  sqlite3_vfs *pVfs = sqlite3_vfs_find(0);
+  if( objc!=1 ){
+    Tcl_WrongNumArgs(interp, 1, objv, "");
+    return TCL_ERROR;
+  }
+  pVfs->xCurrentTimeInt64(pVfs, &t);
+  Tcl_SetObjResult(interp, Tcl_NewWideIntObj(t));
+  return TCL_OK;
+}
+
 /*
 ** Usage:  sqlite3_next_stmt  DB  STMT
 **
@@ -7036,7 +7079,10 @@ int Sqlitetest1_Init(Tcl_Interp *interp){
      { "sqlite3_stmt_scanstatus",       test_stmt_scanstatus,   0 },
      { "sqlite3_stmt_scanstatus_reset", test_stmt_scanstatus_reset,   0 },
 #endif
-
+#ifdef SQLITE_ENABLE_SQLLOG
+     { "sqlite3_config_sqllog",         test_config_sqllog,   0 },
+#endif
+     { "vfs_current_time_int64",           vfsCurrentTimeInt64,   0 },
   };
   static int bitmask_size = sizeof(Bitmask)*8;
   static int longdouble_size = sizeof(LONGDOUBLE_TYPE);
diff --git a/src/test_config.c b/src/test_config.c
index 23db433c9..a5c42f30d 100644
--- a/src/test_config.c
+++ b/src/test_config.c
@@ -125,6 +125,12 @@ static void set_options(Tcl_Interp *interp){
   Tcl_SetVar2(interp, "sqlite_options", "cursorhints", "0", TCL_GLOBAL_ONLY);
 #endif
 
+#ifdef SQLITE_ENABLE_HIDDEN_COLUMNS
+  Tcl_SetVar2(interp, "sqlite_options", "hiddencolumns", "1", TCL_GLOBAL_ONLY);
+#else
+  Tcl_SetVar2(interp, "sqlite_options", "hiddencolumns", "0", TCL_GLOBAL_ONLY);
+#endif
+
 #ifdef SQLITE_ENABLE_MEMSYS3
   Tcl_SetVar2(interp, "sqlite_options", "mem3", "1", TCL_GLOBAL_ONLY);
 #else
@@ -669,6 +675,12 @@ Tcl_SetVar2(interp, "sqlite_options", "mergesort", "1", TCL_GLOBAL_ONLY);
   Tcl_SetVar2(interp, "sqlite_options", "yytrackmaxstackdepth", "0", TCL_GLOBAL_ONLY);
 #endif
 
+#ifdef SQLITE_ENABLE_SQLLOG
+  Tcl_SetVar2(interp, "sqlite_options", "sqllog", "1", TCL_GLOBAL_ONLY);
+#else
+  Tcl_SetVar2(interp, "sqlite_options", "sqllog", "0", TCL_GLOBAL_ONLY);
+#endif
+
 #define LINKVAR(x) { \
     static const int cv_ ## x = SQLITE_ ## x; \
     Tcl_LinkVar(interp, "SQLITE_" #x, (char *)&(cv_ ## x), \
diff --git a/src/test_sqllog.c b/src/test_sqllog.c
index 6c0bf954b..31d5ad2f5 100644
--- a/src/test_sqllog.c
+++ b/src/test_sqllog.c
@@ -46,6 +46,12 @@
 **   separate copy is taken each time the database file is opened or attached)
 **   by setting the environment variable SQLITE_SQLLOG_REUSE_FILES to 0.
 **
+**   If the environment variable SQLITE_SQLLOG_CONDITIONAL is defined, then
+**   logging is only done for database connections if a file named
+**   "<database>-sqllog" exists in the same directly as the main database
+**   file when it is first opened ("<database>" is replaced by the actual 
+**   name of the main database file).
+**
 ** OUTPUT:
 **
 **   The SQLITE_SQLLOG_DIR is populated with three types of files:
@@ -88,6 +94,7 @@ static int getProcessId(void){
 /* Names of environment variables to be used */
 #define ENVIRONMENT_VARIABLE1_NAME "SQLITE_SQLLOG_DIR"
 #define ENVIRONMENT_VARIABLE2_NAME "SQLITE_SQLLOG_REUSE_FILES"
+#define ENVIRONMENT_VARIABLE3_NAME "SQLITE_SQLLOG_CONDITIONAL"
 
 /* Assume that all database and database file names are shorted than this. */
 #define SQLLOG_NAMESZ 512
@@ -116,6 +123,7 @@ static struct SLGlobal {
   int nConn;                      /* Size of aConn[] array */
 
   /* Protected by SLGlobal.mutex */
+  int bConditional;               /* Only trace if *-sqllog file is present */
   int bReuse;                     /* True to avoid extra copies of db files */
   char zPrefix[SQLLOG_NAMESZ];    /* Prefix for all created files */
   char zIdx[SQLLOG_NAMESZ];       /* Full path to *.idx file */
@@ -215,7 +223,7 @@ static char *sqllogFindFile(const char *zFile){
 }
 
 static int sqllogFindAttached(
-  struct SLConn *p,               /* Database connection */
+  sqlite3 *db,                    /* Database connection */
   const char *zSearch,            /* Name to search for (or NULL) */
   char *zName,                    /* OUT: Name of attached database */
   char *zFile                     /* OUT: Name of attached file */
@@ -228,7 +236,7 @@ static int sqllogFindAttached(
   ** described by the last row returned.  */
   assert( sqllogglobal.bRec==0 );
   sqllogglobal.bRec = 1;
-  rc = sqlite3_prepare_v2(p->db, "PRAGMA database_list", -1, &pStmt, 0);
+  rc = sqlite3_prepare_v2(db, "PRAGMA database_list", -1, &pStmt, 0);
   if( rc==SQLITE_OK ){
     while( SQLITE_ROW==sqlite3_step(pStmt) ){
       const char *zVal1; int nVal1;
@@ -236,7 +244,9 @@ static int sqllogFindAttached(
 
       zVal1 = (const char*)sqlite3_column_text(pStmt, 1);
       nVal1 = sqlite3_column_bytes(pStmt, 1);
-      memcpy(zName, zVal1, nVal1+1);
+      if( zName ){
+        memcpy(zName, zVal1, nVal1+1);
+      }
 
       zVal2 = (const char*)sqlite3_column_text(pStmt, 2);
       nVal2 = sqlite3_column_bytes(pStmt, 2);
@@ -285,7 +295,7 @@ static void sqllogCopydb(struct SLConn *p, const char *zSearch, int bLog){
   char *zInit = 0;
   int rc;
 
-  rc = sqllogFindAttached(p, zSearch, zName, zFile);
+  rc = sqllogFindAttached(p->db, zSearch, zName, zFile);
   if( rc!=SQLITE_OK ) return;
 
   if( zFile[0]=='\0' ){
@@ -406,6 +416,35 @@ static void testSqllogStmt(struct SLConn *p, const char *zSql){
 }
 
 /*
+** The database handle passed as the only argument has just been opened.
+** Return true if this module should log initial databases and SQL 
+** statements for this connection, or false otherwise.
+**
+** If an error occurs, sqlite3_log() is invoked to report it to the user
+** and zero returned.
+*/
+static int sqllogTraceDb(sqlite3 *db){
+  int bRet = 1;
+  if( sqllogglobal.bConditional ){
+    char zFile[SQLLOG_NAMESZ];      /* Attached database name */
+    int rc = sqllogFindAttached(db, "main", 0, zFile);
+    if( rc==SQLITE_OK ){
+      int nFile = strlen(zFile);
+      if( (SQLLOG_NAMESZ-nFile)<8 ){
+        sqlite3_log(SQLITE_IOERR, 
+            "sqllogTraceDb(): database name too long (%d bytes)", nFile
+        );
+        bRet = 0;
+      }else{
+        memcpy(&zFile[nFile], "-sqllog", 8);
+        bRet = !access(zFile, F_OK);
+      }
+    }
+  }
+  return bRet;
+}
+
+/*
 ** The SQLITE_CONFIG_SQLLOG callback registered by sqlite3_init_sqllog().
 **
 ** The eType parameter has the following values:
@@ -439,15 +478,19 @@ static void testSqllog(void *pCtx, sqlite3 *db, const char *zSql, int eType){
     if( sqllogglobal.mutex==0 ){
       sqllogglobal.mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_RECURSIVE);
     }
-    p = &sqllogglobal.aConn[sqllogglobal.nConn++];
-    p->fd = 0;
-    p->db = db;
-    p->iLog = sqllogglobal.iNextLog++;
     sqlite3_mutex_leave(master);
 
-    /* Open the log and take a copy of the main database file */
     sqlite3_mutex_enter(sqllogglobal.mutex);
-    if( sqllogglobal.bRec==0 ){
+    if( sqllogglobal.bRec==0 && sqllogTraceDb(db) ){
+
+      sqlite3_mutex_enter(master);
+      p = &sqllogglobal.aConn[sqllogglobal.nConn++];
+      p->fd = 0;
+      p->db = db;
+      p->iLog = sqllogglobal.iNextLog++;
+      sqlite3_mutex_leave(master);
+
+      /* Open the log and take a copy of the main database file */
       sqllogOpenlog(p);
       if( p->fd ) sqllogCopydb(p, "main", 0);
     }
@@ -461,20 +504,21 @@ static void testSqllog(void *pCtx, sqlite3 *db, const char *zSql, int eType){
       p = &sqllogglobal.aConn[i];
       if( p->db==db ) break;
     }
-    if( i==sqllogglobal.nConn ) return;
 
     /* A database handle close command */
     if( eType==2 ){
       sqlite3_mutex_enter(master);
-      if( p->fd ) fclose(p->fd);
-      p->db = 0;
-      p->fd = 0;
+      if( i<sqllogglobal.nConn ){
+        if( p->fd ) fclose(p->fd);
+        p->db = 0;
+        p->fd = 0;
+        sqllogglobal.nConn--;
+      }
 
-      sqllogglobal.nConn--;
       if( sqllogglobal.nConn==0 ){
         sqlite3_mutex_free(sqllogglobal.mutex);
         sqllogglobal.mutex = 0;
-      }else{
+      }else if( i<sqllogglobal.nConn ){
         int nShift = &sqllogglobal.aConn[sqllogglobal.nConn] - p;
         if( nShift>0 ){
           memmove(p, &p[1], nShift*sizeof(struct SLConn));
@@ -483,7 +527,7 @@ static void testSqllog(void *pCtx, sqlite3 *db, const char *zSql, int eType){
       sqlite3_mutex_leave(master);
 
     /* An ordinary SQL command. */
-    }else if( p->fd ){
+    }else if( i<sqllogglobal.nConn && p->fd ){
       sqlite3_mutex_enter(sqllogglobal.mutex);
       if( sqllogglobal.bRec==0 ){
         testSqllogStmt(p, zSql);
@@ -504,6 +548,9 @@ void sqlite3_init_sqllog(void){
     if( SQLITE_OK==sqlite3_config(SQLITE_CONFIG_SQLLOG, testSqllog, 0) ){
       memset(&sqllogglobal, 0, sizeof(sqllogglobal));
       sqllogglobal.bReuse = 1;
+      if( getenv(ENVIRONMENT_VARIABLE3_NAME) ){
+        sqllogglobal.bConditional = 1;
+      }
     }
   }
 }
diff --git a/src/tokenize.c b/src/tokenize.c
index 9c1403bb2..b85e35dc1 100644
--- a/src/tokenize.c
+++ b/src/tokenize.c
@@ -369,8 +369,8 @@ int sqlite3GetToken(const unsigned char *z, int *tokenType){
         break;
       }
       for(i=1; IdChar(z[i]); i++){}
-      *tokenType = keywordCode((char*)z, i);
-      return i;
+      *tokenType = TK_ID;
+      return keywordCode((char*)z, i, tokenType);
     }
   }
   *tokenType = TK_ILLEGAL;
@@ -416,7 +416,7 @@ int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){
   assert( pParse->azVar==0 );
   enableLookaside = db->lookaside.bEnabled;
   if( db->lookaside.pStart ) db->lookaside.bEnabled = 1;
-  while( !db->mallocFailed && zSql[i]!=0 ){
+  while( zSql[i]!=0 ){
     assert( i>=0 );
     pParse->sLastToken.z = &zSql[i];
     pParse->sLastToken.n = sqlite3GetToken((unsigned char*)&zSql[i],&tokenType);
@@ -425,35 +425,25 @@ int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){
       pParse->rc = SQLITE_TOOBIG;
       break;
     }
-    switch( tokenType ){
-      case TK_SPACE: {
-        if( db->u1.isInterrupted ){
-          sqlite3ErrorMsg(pParse, "interrupt");
-          pParse->rc = SQLITE_INTERRUPT;
-          goto abort_parse;
-        }
+    if( tokenType>=TK_SPACE ){
+      assert( tokenType==TK_SPACE || tokenType==TK_ILLEGAL );
+      if( db->u1.isInterrupted ){
+        sqlite3ErrorMsg(pParse, "interrupt");
+        pParse->rc = SQLITE_INTERRUPT;
         break;
       }
-      case TK_ILLEGAL: {
+      if( tokenType==TK_ILLEGAL ){
         sqlite3ErrorMsg(pParse, "unrecognized token: \"%T\"",
                         &pParse->sLastToken);
-        goto abort_parse;
-      }
-      case TK_SEMI: {
-        pParse->zTail = &zSql[i];
-        /* Fall thru into the default case */
-      }
-      default: {
-        sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse);
-        lastTokenParsed = tokenType;
-        if( pParse->rc!=SQLITE_OK ){
-          goto abort_parse;
-        }
         break;
       }
+    }else{
+      if( tokenType==TK_SEMI ) pParse->zTail = &zSql[i];
+      sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse);
+      lastTokenParsed = tokenType;
+      if( pParse->rc!=SQLITE_OK || db->mallocFailed ) break;
     }
   }
-abort_parse:
   assert( nErr==0 );
   if( pParse->rc==SQLITE_OK && db->mallocFailed==0 ){
     assert( zSql[i]==0 );
@@ -510,7 +500,7 @@ abort_parse:
     sqlite3DeleteTable(db, pParse->pNewTable);
   }
 
-  if( pParse->bFreeWith ) sqlite3WithDelete(db, pParse->pWith);
+  sqlite3WithDelete(db, pParse->pWithToFree);
   sqlite3DeleteTrigger(db, pParse->pNewTrigger);
   for(i=pParse->nzVar-1; i>=0; i--) sqlite3DbFree(db, pParse->azVar[i]);
   sqlite3DbFree(db, pParse->azVar);
diff --git a/src/treeview.c b/src/treeview.c
index 971de4e8b..a26e9e2b9 100644
--- a/src/treeview.c
+++ b/src/treeview.c
@@ -79,6 +79,45 @@ static void sqlite3TreeViewItem(TreeView *p, const char *zLabel,u8 moreFollows){
   sqlite3TreeViewLine(p, "%s", zLabel);
 }
 
+/*
+** Generate a human-readable description of a WITH clause.
+*/
+void sqlite3TreeViewWith(TreeView *pView, const With *pWith, u8 moreToFollow){
+  int i;
+  if( pWith==0 ) return;
+  if( pWith->nCte==0 ) return;
+  if( pWith->pOuter ){
+    sqlite3TreeViewLine(pView, "WITH (0x%p, pOuter=0x%p)",pWith,pWith->pOuter);
+  }else{
+    sqlite3TreeViewLine(pView, "WITH (0x%p)", pWith);
+  }
+  if( pWith->nCte>0 ){
+    pView = sqlite3TreeViewPush(pView, 1);
+    for(i=0; i<pWith->nCte; i++){
+      StrAccum x;
+      char zLine[1000];
+      const struct Cte *pCte = &pWith->a[i];
+      sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
+      sqlite3XPrintf(&x, 0, "%s", pCte->zName);
+      if( pCte->pCols && pCte->pCols->nExpr>0 ){
+        char cSep = '(';
+        int j;
+        for(j=0; j<pCte->pCols->nExpr; j++){
+          sqlite3XPrintf(&x, 0, "%c%s", cSep, pCte->pCols->a[j].zName);
+          cSep = ',';
+        }
+        sqlite3XPrintf(&x, 0, ")");
+      }
+      sqlite3XPrintf(&x, 0, " AS");
+      sqlite3StrAccumFinish(&x);
+      sqlite3TreeViewItem(pView, zLine, i<pWith->nCte-1);
+      sqlite3TreeViewSelect(pView, pCte->pSelect, 0);
+      sqlite3TreeViewPop(pView);
+    }
+    sqlite3TreeViewPop(pView);
+  }
+}
+
 
 /*
 ** Generate a human-readable description of a the Select object.
@@ -87,6 +126,11 @@ void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
   int n = 0;
   int cnt = 0;
   pView = sqlite3TreeViewPush(pView, moreToFollow);
+  if( p->pWith ){
+    sqlite3TreeViewWith(pView, p->pWith, 1);
+    cnt = 1;
+    sqlite3TreeViewPush(pView, 1);
+  }
   do{
     sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x",
       ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""),
diff --git a/src/vdbeaux.c b/src/vdbeaux.c
index 7e89229be..86099e1bb 100644
--- a/src/vdbeaux.c
+++ b/src/vdbeaux.c
@@ -158,6 +158,12 @@ static void test_addop_breakpoint(void){
 ** the sqlite3VdbeChangeP4() function to change the value of the P4
 ** operand.
 */
+static SQLITE_NOINLINE int growOp3(Vdbe *p, int op, int p1, int p2, int p3){
+  assert( p->pParse->nOpAlloc<=p->nOp );
+  if( growOpArray(p, 1) ) return 1;
+  assert( p->pParse->nOpAlloc>p->nOp );
+  return sqlite3VdbeAddOp3(p, op, p1, p2, p3);
+}
 int sqlite3VdbeAddOp3(Vdbe *p, int op, int p1, int p2, int p3){
   int i;
   VdbeOp *pOp;
@@ -166,9 +172,7 @@ int sqlite3VdbeAddOp3(Vdbe *p, int op, int p1, int p2, int p3){
   assert( p->magic==VDBE_MAGIC_INIT );
   assert( op>0 && op<0xff );
   if( p->pParse->nOpAlloc<=i ){
-    if( growOpArray(p, 1) ){
-      return 1;
-    }
+    return growOp3(p, op, p1, p2, p3);
   }
   p->nOp++;
   pOp = &p->aOp[i];