| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile rules have been accumulated across the tree
to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. Note that tests of contrib/bloom/
are not enabled yet, as those are proving unstable in the buildfarm.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This bypasses installcheck if specified, which makes sense for those
modules as they require non-default configuration, something which
typical users don't have. Those have been missing from the start, still
no back-patch is done.
This will be used by an upcoming patch for MSVC scripts adding support
for NO_INSTALLCHECK as installcheck is the default mode for contrib and
modules for performance reasons in the buildfarm.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/20181126054302.GI1776@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
| |
A set of failures in buildfarm machines are proving that this is not
quite ready yet because of another set of issues:
- MSVC scripts assume that REGRESS_OPTS can only use top_builddir. Some
test suites actually finish by using top_srcdir, like pg_stat_statements
which cause the regression tests to never run.
- Trying to enforce top_builddir does not work either when using VPATH
as this is not recognized properly.
- TAP tests of bloom are unstable on various platforms, causing various
failures.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The following options are added for extensions:
- TAP_TESTS, to allow an extention to run TAP tests which are the ones
present in t/*.pl. A subset of tests can always be run with the
existing PROVE_TESTS for developers.
- ISOLATION, to define a list of isolation tests.
- ISOLATION_OPTS, to pass custom options to isolation_tester.
A couple of custom Makefile targets have been accumulated across the
tree to cover the lack of facility in PGXS for a couple of releases when
using those test suites, which are all now replaced with the new flags,
without reducing the test coverage. This also fixes an issue with
contrib/bloom/, which had a custom target to trigger its TAP tests of
its own not part of the main check runs.
Author: Michael Paquier
Reviewed-by: Adam Berlin, Álvaro Herrera, Tom Lane, Nikolay Shaplov,
Arthur Zakirov
Discussion: https://postgr.es/m/20180906014849.GG2726@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5faccab64776376d354decda0017c648bb53 introduced the
shared temp-install.
|
| |
|
|
|
| |
This affects mostly code comments, some documentation, and tests.
Official APIs already used "standby".
|
| |
|
|
|
|
| |
Otherwise, the script output has a lot of pointless warnings.
This was forgotten in 9def031bd2821f35b5f506260d922482648a8bb0
|
| |
|
|
|
| |
Since pg_ctl promote already waits for recovery to end, these calls are
obsolete.
|
| |
|
|
|
|
| |
Several callers of PostgresNode::poll_query_until() neglected to check
for failure; I do not think that's optional. Also, rewrite one place
that had reinvented poll_query_until() for no very good reason.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although the documentation for append_conf said clearly that it didn't
add a newline, many test authors seem to have forgotten that ... or maybe
they just consulted the example at the top of the POD documentation,
which clearly shows adding a config entry without bothering to add a
trailing newline. The worst part of that is that it works, as long as
you don't do it more than once, since the backend isn't picky about
whether config files end with newlines. So there's not a strong forcing
function reminding test authors not to do it like that. Upshot is that
this is a terribly fragile way to go about things, and there's at least
one existing test case that is demonstrably broken and not testing what
it thinks it is.
Let's just make append_conf append a newline, instead; that is clearly
way safer than the old definition.
I also cleaned up a few call sites that were unnecessarily ugly.
(I left things alone in places where it's plausible that additional
config lines would need to be added someday.)
Back-patch the change in append_conf itself to 9.6 where it was added,
as having a definitional inconsistency between branches would obviously
be pretty hazardous for back-patching TAP tests. The other changes are
just cosmetic and don't need to be back-patched.
Discussion: https://postgr.es/m/19751.1492892376@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit f82ec32ac30ae7e3ec7c84067192535b2ff8ec0e renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
We were using != to compare strings, for which "ne" is the right thing.
It's not clear why it works everywhere except on Pavan's machine, but
it's clearly bogus anyway.
Author and reporter: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdPhsHM+pX8skoEY1_T0OtKdO1udzUj4VCjU5VEt+bj4eA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the default values of the following parameters:
wal_level = replica
max_wal_senders = 10
max_replication_slots = 10
in order to make it possible to make a backup and set up simple
replication on the default settings, without requiring a system restart.
Discussion: https://postgr.es/m/CABUevEy4PR_EAvZEzsbF5s+V0eEvw7shJ2t-AUwbHOjT+yRb3A@mail.gmail.com
Reviewed by Peter Eisentraut. Benchmark help from Tomas Vondra.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Backpatch to 9.6.
Noted by Tom Lane.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
|
| |
|
|
| |
Per red wall in buildfarm
|
| |
|
|
| |
Backpatch certain files through 9.0
|
| |
|
|
|
|
| |
Noticed on a couple of Windows configurations.
Petr Jelinek, reviewed by Michael Paquier.
|
|
|
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
|
