| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 08c0d6ad6 which introduced "rainbow" arcs in regex NFAs,
I didn't think terribly hard about what to do when creating the color
complement of a rainbow arc. Clearly, the complement cannot match any
characters, and I took the easy way out by just not building any arcs
at all in the complement arc set. That mostly works, but Nikolay
Shaplov found a case where it doesn't: if we decide to delete that
sub-NFA later because it's inside a "{0}" quantifier, delsub()
suffered an assertion failure. That's because delsub() relies on
the target sub-NFA being fully connected. That was always true
before, and the best fix seems to be to restore that property.
Hence, invent a new arc type CANTMATCH that can be generated in
place of an empty color complement, and drop it again later when we
start NFA optimization. (At that point we don't need to do delsub()
any more, and besides there are other cases where NFA optimization can
lead to disconnected subgraphs.)
It appears that this bug has no consequences in a non-assert-enabled
build: there will be some transiently leaked NFA states/arcs, but
they'll get cleaned up eventually. Still, we don't like assertion
failures, so back-patch to v14 where rainbow arcs were introduced.
Per bug #18708 from Nikolay Shaplov.
Discussion: https://postgr.es/m/18708-f94f2599c9d2c005@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, a PostgreSQL-specific callback checked by the regex engine
had a way to trigger a special error code REG_CANCEL if it detected that
the next call to CHECK_FOR_INTERRUPTS() would certainly throw via
ereport().
A later proposed bugfix aims to move some complex logic out of signal
handlers, so that it won't run until the next CHECK_FOR_INTERRUPTS(),
which makes the above design impossible unless we split
CHECK_FOR_INTERRUPTS() into two phases, one to run logic and another to
ereport(). We may develop such a system in the future, but for the
regex code it is no longer necessary.
An earlier commit moved regex memory management over to our
MemoryContext system. Given that the purpose of the two-phase interrupt
checking was to free memory before throwing, something we don't need to
worry about anymore, it seems simpler to inject CHECK_FOR_INTERRUPTS()
directly into cancelation points, and just let it throw.
Since the plan is to keep PostgreSQL-specific concerns separate from the
main regex engine code (with a view to bein able to stay in sync with
other projects), do this with a new macro INTERRUPT(), customizable in
regcustom.h and defaulting to nothing.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGK3PGKwcKqzoosamn36YW-fsuTdOPPF1i_rtEO%3DnEYKSg%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Identifying the precise match locations for parenthesized subexpressions
is a fairly expensive task given the way our regexp engine works, both
at regexp compile time (where we must create an optimized NFA for each
parenthesized subexpression) and at runtime (where determining exact
match locations requires laborious search).
Up to now we've made little attempt to optimize this situation. This
patch identifies cases where we know at compile time that we won't
need to know subexpression match locations, and teaches the regexp
compiler to not bother creating per-subexpression regexps for
parenthesis pairs that are not referenced by backrefs elsewhere in
the regexp. (To preserve semantics, we obviously still have to
pin down the match locations of backref references.) Users could
have obtained the same results before this by being careful to
write "non capturing" parentheses wherever possible, but few people
bother with that.
Discussion: https://postgr.es/m/2219936.1628115334@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous logic here created a separate pool of arcs for each
state, so that the out-arcs of each state were physically stored
within it. Perhaps this choice was driven by trying to not include
a "from" pointer within each arc; but Spencer gave up on that idea
long ago, and it's hard to see what the value is now. The approach
turns out to be fairly disastrous in terms of memory consumption,
though. In the first place, NFAs built by this engine seem to have
about 4 arcs per state on average, with a majority having only one
or two out-arcs. So pre-allocating 10 out-arcs for each state is
already cause for a factor of two or more bloat. Worse, the NFA
optimization phase moves arcs around with abandon. In a large NFA,
some of the states will have hundreds of out-arcs, so towards the
end of the optimization phase we have a significant number of states
whose arc pools have room for hundreds of arcs each, even though only
a few of those arcs are in use. We have seen real-world regexes in
which this effect bloats the memory requirement by 25X or even more.
Hence, get rid of the per-state arc pools in favor of a single arc
pool for the whole NFA, with variable-sized allocation batches
instead of always asking for 10 at a time. While we're at it,
let's batch the allocations of state structs too, to further reduce
the malloc traffic.
This incidentally allows moveouts() to be optimized in a similar
way to moveins(): when moving an arc to another state, it's now
valid to just re-link the same arc struct into a different outchain,
where before the code invariants required us to make a physically
new arc and then free the old one.
These changes reduce the regex compiler's typical space consumption
for average-size regexes by about a factor of two, and much more for
large or complicated regexes. In a large test set of real-world
regexes, we formerly had half a dozen cases that failed with "regular
expression too complex" due to exceeding the REG_MAX_COMPILE_SPACE
limit (about 150MB); we would have had to raise that limit to
something close to 400MB to make them work with the old code. Now,
none of those cases need more than 13MB to compile. Furthermore,
the test set is about 10% faster overall due to less malloc traffic.
Discussion: https://postgr.es/m/168861.1614298592@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The complement-class escapes \D, \S, \W are now allowed within
bracket expressions. There is no semantic difficulty with doing
that, but the rather hokey macro-expansion-based implementation
previously used here couldn't cope.
Also, invent "word" as an allowed character class name, thus "\w"
is now equivalent to "[[:word:]]" outside brackets, or "[:word:]"
within brackets. POSIX allows such implementation-specific
extensions, and the same name is used in e.g. bash.
One surprising compatibility issue this raises is that constructs
such as "[\w-_]" are now disallowed, as our documentation has always
said they should be: character classes can't be endpoints of a range.
Previously, because \w was just a macro for "[:alnum:]_", such a
construct was read as "[[:alnum:]_-_]", so it was accepted so long as
the character after "-" was numerically greater than or equal to "_".
Some implementation cleanup along the way:
* Remove the lexnest() hack, and in consequence clean up wordchrs()
to not interact with the lexer.
* Fix colorcomplement() to not be O(N^2) in the number of colors
involved.
* Get rid of useless-as-far-as-I-can-see calls of element()
on single-character character element names in brackpart().
element() always maps these to the character itself, and things
would be quite broken if it didn't --- should "[a]" match something
different than "a" does? Besides, the shortcut path in brackpart()
wasn't doing this anyway, making it even more inconsistent.
Discussion: https://postgr.es/m/2845172.1613674385@sss.pgh.pa.us
Discussion: https://postgr.es/m/3220564.1613859619@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, each pair of capturing parentheses gave rise to a separate
subre tree node, whose only function was to identify that we ought to
capture the match details for this particular sub-expression. In
most cases we don't really need that, since we can perfectly well
put a "capture this" annotation on the child node that does the real
matching work. As with the two preceding commits, the main value
of this is to avoid generating and optimizing an NFA for a tree node
that's not really pulling its weight.
The chosen data representation only allows one capture annotation
per subre node. In the legal-per-spec, but seemingly not very useful,
case where there are multiple capturing parens around the exact same
bit of the regex (i.e. "((xyz))"), wrap the child node in N-1 capture
nodes that act the same as before. We could work harder at that but
I'll refrain, pending some evidence that such cases are worth troubling
over.
In passing, improve the comments in regex.h to say what all the
different re_info bits mean. Some of them were pretty obvious
but others not so much, so reverse-engineer some documentation.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of having left and right child links in subre structs,
have a single child link plus a sibling link. Multiple children
of a tree node are now reached by chasing the sibling chain.
The beneficiary of this is alternation tree nodes. A regular
expression with N (>1) branches is now represented by one alternation
node with N children, rather than a tree that includes N alternation
nodes as well as N children. While the old representation didn't
really cost anything extra at execution time, it was pretty horrid
for compilation purposes, because each of the alternation nodes had
its own NFA, which we were too stupid not to separately optimize.
(To make matters worse, all of those NFAs described the entire
alternation pattern, not just the portion of it that one might
expect from the tree structure.)
We continue to require concatenation nodes to have exactly two
children. This data structure is now prepared to support more,
but the executor's logic would need some careful redesign, and
it's not clear that a lot of benefit could be had.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This builds on the previous "rainbow" patch to detect NFAs that will
match any string, though possibly with constraints on the string length.
This definition is chosen to match constructs such as ".*", ".+", and
".{1,100}". Recognizing such an NFA after the optimization pass is
fairly cheap, since we basically just have to verify that all arcs
are RAINBOW arcs and count the number of steps to the end state.
(Well, there's a bit of complication with pseudo-color arcs for string
boundary conditions, but not much.)
Once we have these markings, the regex executor functions longest(),
shortest(), and matchuntil() don't have to expend per-character work
to determine whether a given substring satisfies such an NFA; they
just need to check its length against the bounds. Since some matching
problems require O(N) invocations of these functions, we've reduced
the runtime for an N-character string from O(N^2) to O(N). Of course,
this is no help for non-matchall sub-patterns, but those usually have
constraints that allow us to avoid needing O(N) substring checks in the
first place. It's precisely the unconstrained "match-all" cases that
cause the most headaches.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some regular expression constructs, most notably the "." match-anything
metacharacter, produce a sheaf of parallel NFA arcs covering all
possible colors (that is, character equivalence classes). We can make
a noticeable improvement in the space and time needed to process large
regexes by replacing such cases with a single arc bearing the special
color code "RAINBOW". This requires only minor additional complication
in places such as pull() and push().
Callers of pg_reg_getoutarcs() must now be prepared for the possibility
of seeing a RAINBOW arc. For the one known user, contrib/pg_trgm,
that's a net benefit since it cuts the number of arcs to be dealt with,
and the handling isn't any different than for other colors that contain
too many characters to be dealt with individually.
This is part of a patch series that in total reduces the regex engine's
runtime by about a factor of four on a large corpus of real-world regexes.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When REG_DEBUG is defined, ensure that an un-filled "struct cnfa"
is all-zeroes, not just that it has nstates == 0. This is mainly
so that looking at "struct subre" structs in gdb doesn't distract
one with a lot of garbage fields during regex compilation.
Adjust some places that print debug output to have suitable fflush
calls afterwards.
In passing, correct an erroneous ancient comment: the concatenation
subre-s created by parsebranch() have op == '.' not ','.
Noted while fooling around with some regex performance improvements.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
|
| |
|
|
|
|
| |
pcolor was used to represent function arguments that are nominally of
type color, but when using a pre-ANSI C compiler would be passed as the
promoted integer type. We really don't need that anymore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A lookbehind constraint is like a lookahead constraint in that it consumes
no text; but it checks for existence (or nonexistence) of a match *ending*
at the current point in the string, rather than one *starting* at the
current point. This is a long-requested feature since it exists in many
other regex libraries, but Henry Spencer had never got around to
implementing it in the code we use.
Just making it work is actually pretty trivial; but naive copying of the
logic for lookahead constraints leads to code that often spends O(N^2) time
to scan an N-character string, because we have to run the match engine
from string start to the current probe point each time the constraint is
checked. In typical use-cases a lookbehind constraint will be written at
the start of the regex and hence will need to be checked at every character
--- so O(N^2) work overall. To fix that, I introduced a third copy of the
core DFA matching loop, paralleling the existing longest() and shortest()
loops. This version, matchuntil(), can suspend and resume matching given
a couple of pointers' worth of storage space. So we need only run it
across the string once, stopping at each interesting probe point and then
resuming to advance to the next one.
I also put in an optimization that simplifies one-character lookahead and
lookbehind constraints, such as "(?=x)" or "(?<!\w)", into AHEAD and BEHIND
constraints, which already existed in the engine. This avoids the overhead
of the LACON machinery entirely for these rather common cases.
The net result is that lookbehind constraints run a factor of three or so
slower than Perl's for multi-character constraints, but faster than Perl's
for one-character constraints ... and they work fine for variable-length
constraints, which Perl gives up on entirely. So that's not bad from a
competitive perspective, and there's room for further optimization if
anyone cares. (In reality, raw scan rate across a large input string is
probably not that big a deal for Postgres usage anyway; so I'm happy if
it's linear.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This code previously counted the number of NFA states it created, and
complained if a limit was exceeded, so as to prevent bizarre regex patterns
from consuming unreasonable time or memory. That's fine as far as it went,
but the code paid no attention to how many arcs linked those states. Since
regexes can be contrived that have O(N) states but will need O(N^2) arcs
after fixempties() processing, it was still possible to blow out memory,
and take a long time doing it too. To fix, modify the bookkeeping to count
space used by both states and arcs.
I did not bother with including the "color map" in the accounting; it
can only grow to a few megabytes, which is not a lot in comparison to
what we're allowing for states+arcs (about 150MB on 64-bit machines
or half that on 32-bit machines).
Looking at some of the larger real-world regexes captured in the Tcl
regression test suite suggests that the most that is likely to be needed
for regexes found in the wild is under 10MB, so I believe that the current
limit has enough headroom to make it okay to keep it as a hard-wired limit.
In connection with this, redefine REG_ETOOBIG as meaning "regular
expression is too complex"; the previous wording of "nfa has too many
states" was already somewhat inapropos because of the error code's use
for stack depth overrun, and it was not very user-friendly either.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change the singly-linked in-arc and out-arc lists to be doubly-linked,
so that arc deletion is constant time rather than having worst-case time
proportional to the number of other arcs on the connected states.
Modify the bulk arc transfer operations copyins(), copyouts(), moveins(),
moveouts() so that they use a sort-and-merge algorithm whenever there's
more than a small number of arcs to be copied or moved. The previous
method is O(N^2) in the number of arcs involved, because it performs
duplicate checking independently for each copied arc. The new method may
change the ordering of existing arcs for the destination state, but nothing
really cares about that.
Provide another bulk arc copying method mergeins(), which is unused as
of this commit but is needed for the next one. It basically is like
copyins(), but the source arcs might not all come from the same state.
Replace the O(N^2) bubble-sort algorithm used in carcsort() with a qsort()
call.
These changes greatly improve the performance of regex compilation for
large or complex regexes, at the cost of extra space for arc storage during
compilation. The original tradeoff was probably fine when it was made, but
now we care more about speed and less about memory consumption.
Back-patch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some of the functions in regex compilation and execution recurse, and
therefore could in principle be driven to stack overflow. The Tcl crew
has seen this happen in practice in duptraverse(), though their fix was
to put in a hard-wired limit on the number of recursive levels, which is
not too appetizing --- fortunately, we have enough infrastructure to check
the actually available stack. Greg Stark has also seen it in other places
while fuzz testing on a machine with limited stack space. Let's put guards
in to prevent crashes in all these places.
Since the regex code would leak memory if we simply threw elog(ERROR),
we have to introduce an API that checks for stack depth without throwing
such an error. Fortunately that's not difficult.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
After an internal failure in shortest() or longest() while pinning down the
exact location of a match, find() forgot to free the DFA structure before
returning. This is pretty unlikely to occur, since we just successfully
ran the "search" variant of the DFA; but it could happen, and it would
result in a session-lifespan memory leak since this code uses malloc()
directly. Problem seems to have been aboriginal in Spencer's library,
so back-patch all the way.
In passing, correct a thinko in a comment I added awhile back about the
meaning of the "ntree" field.
I happened across these issues while comparing our code to Tcl's version
of the library.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sync our regex code with upstream changes since last time we did this,
which was Tcl 8.5.11 (see commit 08fd6ff37f71485e2fc04bc6ce07d2a483c36702).
The only functional change here is to disbelieve that an octal escape is
three digits long if it would exceed \377. That's a bug fix, but it's
a minor one and could change the interpretation of working regexes, so
don't back-patch.
In addition to that, s/INFINITY/DUPINF/ to eliminate the risk of collisions
with <math.h>'s macro, and s/LOCAL/NOPROP/ because that also seems like
an unnecessarily collision-prone macro name.
There were some other cosmetic changes in their copy that I did not adopt,
notably a rather half-hearted attempt at renaming some of the C functions
in a more verbose style. (I'm not necessarily against the concept, but
renaming just a few functions in the package is not an improvement.)
|
| |
|
|
| |
Per an off-list question from Piotr Stefaniak.
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The regex code didn't have any provision for query cancel; which is
unsurprising given its non-Postgres origin, but still problematic since
some operations can take a long time. Introduce a callback function to
check for a pending query cancel or session termination request, and
call it in a couple of strategic spots where we can make the regex code
exit with an error indicator.
If we ever actually split out the regex code as a standalone library,
some additional work will be needed to let the cancel callback function
be specified externally to the library. But that's straightforward
(certainly so by comparison to putting the locale-dependent character
classification logic on a similar arms-length basis), and there seems
no need to do it right now.
A bigger issue is that there may be more places than these two where
we need to check for cancels. We can always add more checks later,
now that the infrastructure is in place.
Since there are known examples of not-terribly-long regexes that can
lock up a backend for a long time, back-patch to all supported branches.
I have hopes of fixing the known performance problems later, but adding
query cancel ability seems like a good idea even if they were all fixed.
|
| |
|
|
| |
NFAs have children, but their individual states don't.
|
| |
|
|
|
|
| |
Throw an error instead.
Backpatch to all supported branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To generate btree-indexable conditions from regex WHERE conditions (such as
WHERE indexed_col ~ '^foo'), we need to be able to identify any fixed
prefix that a regex might have; that is, find any string that must be a
prefix of all strings satisfying the regex. We used to do that with
entirely ad-hoc code that looked at the source text of the regex. It
didn't know very much about regex syntax, which mostly meant that it would
fail to identify some optimizable cases; but Viktor Rosenfeld reported that
it would produce actively wrong answers for quantified parenthesized
subexpressions, such as '^(foo)?bar'. Rather than trying to extend the
ad-hoc code to cover this, let's get rid of it altogether in favor of
identifying prefixes by examining the compiled form of a regex.
To do this, I've added a new entry point "pg_regprefix" to the regex library;
hopefully it is defined in a sufficiently general fashion that it can remain
in the library when/if that code gets split out as a standalone project.
Since this bug has been there for a very long time, this fix needs to get
back-patched. However it depends on some other recent commits (particularly
the addition of wchar-to-database-encoding conversion), so I'll commit this
separately and then go to work on back-porting the necessary fixes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding abused the first element of a cNFA state's arcs list
to hold a per-state flag bit, which was confusing, undocumented, and not
even particularly efficient. Get rid of that in favor of a separate
"stflags" vector. Since there's only one bit in use, I chose to allocate a
char per state; we could possibly replace this with a bitmap at some point,
but that would make accesses a little slower. It's already about 8X
smaller than before, so let's not get overly tense.
Also document the representation better than it was before, which is to say
not at all.
This patch is a byproduct of investigations towards extracting a "fixed
prefix" string from the compact-NFA representation of regex patterns.
Might need to back-patch it if we decide to back-patch that fix, but for
now it's just code cleanup so I'll just put it in HEAD.
|
| |
|
|
| |
commit-fest.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In nested sub-regex trees, lower-level nodes created DFAs and then
destroyed them again before exiting, which is a bit dumb considering that
the recursive search is likely to call those nodes again later. Instead
cache each created DFA until the end of pg_regexec(). This is basically a
space for time tradeoff, in that it might increase the maximum memory
usage. However, in most regex patterns there are not all that many subre
nodes, so not that many DFAs --- and in any case, the peak usage occurs
when reaching the bottom recursion level, and except for alternation cases
that's going to be the same anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Apparently some primordial version of Spencer's engine needed cdissect()
and child functions to be able to continue matching from a previous
position when re-called. That is dead code, though, since trivial
inspection shows that cdissect can never be entered without having
previously done zapmem which resets the relevant retry counter. I have
also verified experimentally that no case in the Tcl regression tests
reaches cdissect with a nonzero retry value. Accordingly, remove that
logic. This doesn't really save any noticeable number of cycles in itself,
but it is one step towards making dissect() and cdissect() equivalent,
which will allow removing hundreds of lines of near-duplicated code.
Since struct subre's "retry" field is no longer particularly related to
any kind of retry, rename it to "id". As of this commit it's only used
for identifying a subre node in debug printouts, so you might think we
should get rid of the field entirely; but I have a plan for another use.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Cases where a back-reference is part of a larger subexpression that
is quantified have never worked in Spencer's regex engine, because
he used a compile-time transformation that neglected the need to
check the back-reference match in iterations before the last one.
(That was okay for capturing parens, and we still do it if the
regex has *only* capturing parens ... but it's not okay for backrefs.)
To make this work properly, we have to add an "iteration" node type
to the regex engine's vocabulary of sub-regex nodes. Since this is a
moderately large change with a fair risk of introducing new bugs of its
own, apply to HEAD only, even though it's a fix for a longstanding bug.
|
| |
|
|
|
|
|
|
|
|
| |
Create src/backend/regex/README to hold an implementation overview of
the regex package, and fill it in with some preliminary notes about
the code's DFA/NFA processing and colormap management. Much more to
do there of course.
Also, improve some code comments around the colormap and cvec code.
No functional changes except to add one missing assert.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
was Tcl 8.4.8. The main changes are to remove the never-fully-implemented
code for multi-character collating elements, and to const-ify some stuff a
bit more fully. In combination with the recent security patch, this commit
brings us into line with Tcl 8.5.0.
Note that I didn't make any effort to duplicate a lot of cosmetic changes
that they made to bring their copy into line with their own style
guidelines, such as adding braces around single-line IF bodies. Most of
those we either had done already (such as ANSI-fication of function headers)
or there is no point because pgindent would undo the change anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
are shared with Tcl, since it's their code to begin with, and the patches
have been copied from Tcl 8.5.0. Problems:
CVE-2007-4769: Inadequate check on the range of backref numbers allows
crash due to out-of-bounds read.
CVE-2007-4772: Infinite loop in regex optimizer for pattern '($|^)*'.
CVE-2007-6067: Very slow optimizer cleanup for regex with a large NFA
representation, as well as crash if we encounter an out-of-memory condition
during NFA construction.
Part of the response to CVE-2007-6067 is to put a limit on the number of
states in the NFA representation of a regex. This seems needed even though
the within-the-code problems have been corrected, since otherwise the code
could try to use very large amounts of memory for a suitably-crafted regex,
leading to potential DOS by driving the system into swap, activating a kernel
OOM killer, etc.
Although there are certainly plenty of ways to drive the system into effective
DOS with poorly-written SQL queries, these problems seem worth treating as
security issues because many applications might accept regex search patterns
from untrustworthy sources.
Thanks to Will Drewry of Google for reporting these problems. Patches by Will
Drewry and Tom Lane.
Security: CVE-2007-4769, CVE-2007-4772, CVE-2007-6067
|
| | |
|
| |
|
|
| |
them, the executation behavior could be unexpected.
|
| | |
|
| | |
|
|
|
(extracted from Tcl 8.4.1 release, as Henry still hasn't got round to
making it a separate library). This solves a performance problem for
multibyte, as well as upgrading our regexp support to match recent Tcl
and nearly match recent Perl.
|
