| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Once a replication slot is invalidated, it cannot be altered or used to
fetch changes. However, a process could still acquire an invalid slot and
fail later.
For example, if a process acquires a logical slot that was invalidated due
to wal_removed, it will eventually fail in CreateDecodingContext() when
attempting to access the removed WAL. Similarly, for physical replication
slots, even if the slot is invalidated and invalidation_reason is set to
wal_removed, the walsender does not currently check for invalidation when
starting physical replication. Instead, replication starts, and an error
is only reported later while trying to access WAL. Similarly, we prohibit
modifying slot properties for invalid slots but give the error for the
same after acquiring the slot.
This patch improves error handling by detecting invalid slots earlier at
the time of slot acquisition which is the first step. This also helped in
unifying different ERROR messages at different places and gave a
consistent message for invalid slots. This means that the message for
invalid slots will change to a generic message.
This will also be helpful for future patches where we are planning to
invalidate slots due to more reasons like idle_timeout because we don't
have to modify multiple places in such cases and avoid the chances of
missing out on a particular place.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CABdArM6pBL5hPnSQ+5nEVMANcF4FCH7LQmgskXyiLY75TMnKpw@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 13
|
| |
|
|
|
|
|
|
| |
as determined by IWYU
These are mostly issues that are new since commit dbbca2cf299.
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
| |
|
|
|
|
|
|
| |
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature will allow us to replicate the changes on subscriber nodes
after the upgrade.
Previously, only the subscription metadata information was preserved.
Without the list of relations and their state, it's not possible to
re-enable the subscriptions without missing some records as the list of
relations can only be refreshed after enabling the subscription (and
therefore starting the apply worker). Even if we added a way to refresh
the subscription while enabling a publication, we still wouldn't know
which relations are new on the publication side, and therefore should be
fully synced, and which shouldn't.
To preserve the subscription relations, this patch teaches pg_dump to
restore the content of pg_subscription_rel from the old cluster by using
binary_upgrade_add_sub_rel_state SQL function. This is supported only
in binary upgrade mode.
The subscription's replication origin is needed to ensure that we don't
replicate anything twice.
To preserve the replication origins, this patch teaches pg_dump to update
the replication origin along with creating a subscription by using
binary_upgrade_replorigin_advance SQL function to restore the
underlying replication origin remote LSN. This is supported only in
binary upgrade mode.
pg_upgrade will check that all the subscription relations are in 'i'
(init) or in 'r' (ready) state and will error out if that's not the case,
logging the reason for the failure. This helps to avoid the risk of any
dangling slot or origin after the upgrade.
Author: Vignesh C, Julien Rouhaud, Shlok Kyal
Reviewed-by: Peter Smith, Masahiko Sawada, Michael Paquier, Amit Kapila, Hayato Kuroda
Discussion: https://postgr.es/m/20230217075433.u5mjly4d5cr4hcfe@jrouhaud
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The commit 29d0a77fa6 labelled binary_upgrade_logical_slot_has_caught_up()
as a non-strict function to allow providing a better error message to callers
in case the passed slot_name is NULL. On further discussion, it seems that
it is not helpful to have a different error message for NULL input in this
function, so this patch marks the function as strict.
This patch also removes the explicit permission check to use replication
slots as this function is invoked only by superusers and instead adds an
Assert.
Reported-by: Masahiko Sawada
Author: Hayato Kuroda
Reviewed-by: Vignesh C
Discussion: https://postgr.es/m/CAD21AoDSyiBKkMXBxN_gUayZZUCOgyHnG8Ge8rcPXNP3Tf6B4g@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 11
|
| |
|
|
|
|
|
|
| |
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, database OIDs, relfilenodes, and tablespace OIDs can all
change when a cluster is upgraded using pg_upgrade. It seems better
to preserve them, because (1) it makes troubleshooting pg_upgrade
easier, since you don't have to do a lot of work to match up files
in the old and new clusters, (2) it allows 'rsync' to save bandwidth
when used to re-sync a cluster after an upgrade, and (3) if we ever
encrypt or sign blocks, we would likely want to use a nonce that
depends on these values.
This patch only arranges to preserve relfilenodes and tablespace
OIDs. The task of preserving database OIDs is left for another patch,
since it involves some complexities that don't exist in these cases.
Database OIDs have a similar issue, but there are some tricky points
in that case that do not apply to these cases, so that problem is left
for another patch.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Design problems were discovered in the handling of composite types and
record types that would cause some relevant versions not to be recorded.
Misgivings were also expressed about the use of the pg_depend catalog
for this purpose. We're out of time for this release so we'll revert
and try again.
Commits reverted:
1bf946bd: Doc: Document known problem with Windows collation versions.
cf002008: Remove no-longer-relevant test case.
ef387bed: Fix bogus collation-version-recording logic.
0fb0a050: Hide internal error for pg_collation_actual_version(<bad OID>).
ff942057: Suppress "warning: variable 'collcollate' set but not used".
d50e3b1f: Fix assertion in collation version lookup.
f24b1569: Rethink extraction of collation dependencies.
257836a7: Track collation versions for indexes.
cd6f479e: Add pg_depend.refobjversion.
7d1297df: Remove pg_collation.collversion.
Discussion: https://postgr.es/m/CA%2BhUKGLhj5t1fcjqAu8iD9B3ixJtsTNqyCCD4V0aTO9kAKAjjA%40mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit f7f70d5e2 left one inconsistency behind: we're still creating
pg_type entries for the composite types of sequences and toast tables,
but not arrays over those composites. But there seems precious little
reason to have named composite types for toast tables, and not much more
to have them for sequences (especially given the thought that sequences
may someday not be standalone relations at all).
So, let's close that inconsistency by removing these composite types,
rather than adding arrays for them. This buys back a little bit of
the initial pg_type bloat added by the previous patch, and could be
a significant savings in a large database with many toast tables.
Aside from a small logic rearrangement in heap_create_with_catalog,
this patch mostly needs to clean up some places that were assuming that
pg_class.reltype always has a valid value. Those are really pre-existing
bugs, given that it's documented otherwise; notably, the plpgsql changes
fix code that gives "cache lookup failed for type 0" on indexes today.
But none of these seem interesting enough to back-patch.
Also, remove the pg_dump/pg_upgrade infrastructure for propagating
a toast table's pg_type OID into the new database, since we no longer
need that.
Discussion: https://postgr.es/m/761F1389-C6A8-4C15-80CE-950C961F5341@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
|
| |
|
|
|
|
|
| |
Cosmetic cleanup, not worth backpatching.
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
Reviewed-by: Tom Lane, Michael Paquier
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 16828d5c02 neglected to do this, so upgraded databases would
silently get null instead of the specified default in rows without the
attribute defined.
A new binary upgrade function is provided to perform this and pg_dump is
adjusted to output a call to the function if required in binary upgrade
mode.
Also included is code to drop missing attribute values for dropped
columns. That way if the type is later dropped the missing value won't
have a dangling reference to the type.
Finally the regression tests are adjusted to ensure that there is a row
with a missing value so that this code is exercised in upgrade testing.
Catalog version unfortunately bumped.
Regression test changes from Tom Lane.
Remainder from me, reviewed by Tom Lane, Andres Freund, Alvaro Herrera
Discussion: https://postgr.es/m/19987.1529420110@sss.pgh.pa.us
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
| |
In functions that issue a deconstruct_array() call, consistently use
plain VARSIZE()/VARDATA() on the array elements. Prior practice was
divided between those and VARSIZE_ANY_EXHDR()/VARDATA_ANY().
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The CHECK_IS_BINARY_UPGRADE macro is not sufficient security protection
if we're going to dereference pass-by-reference arguments before it.
But in any case we really need to explicitly check PG_ARGISNULL for all
the arguments of a non-strict function, not only the ones we expect null
values for.
Oversight in commits 30982be4e5019684e1772dd9170aaa53f5a8e894 and
f92fc4c95ddcc25978354a8248d3df22269201bc. Found by Andreas Seltenreich.
(The other usages in pg_upgrade_support.c seem safe.)
|
| |
|
|
| |
Backpatch certain files through 9.1
|
| | |
|
|
|
Previously, these functions were created in a schema "binary_upgrade",
which was deleted after pg_upgrade was finished. Because we don't want
to keep that schema around permanently, move them to pg_catalog but
rename them with a binary_upgrade_... prefix.
The provided functions are only small wrappers around global variables
that were added specifically for pg_upgrade use, so keeping the module
separate does not create any modularity.
The functions still check that they are only called in binary upgrade
mode, so it is not possible to call these during normal operation.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
