| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
| |
Backpatch-through: 13
|
| |
|
|
|
|
|
|
| |
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Some of these appear to be leftovers from when hash_search() took a
char * argument (changed in 5999e78fc45dcb91784b64b6e9ae43f4e4f68ca2).
Since after this there is some more horizontal space available, do
some light reformatting where suitable.
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/fd9adf5d-b1aa-e82f-e4c7-263c30145807%40enterprisedb.com
|
| |
|
|
| |
Backpatch-through: 11
|
| |
|
|
| |
Backpatch-through: 10
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similar to 50e17ad28, which allowed hash tables to be used for IN clauses
with a set of constants, here we add the same feature for NOT IN clauses.
NOT IN evaluates the same as: WHERE a <> v1 AND a <> v2 AND a <> v3.
Obviously, if we're using a hash table we must be exactly equivalent to
that and return the same result taking into account that either side of
the condition could contain a NULL. This requires a little bit of
special handling to make work with the hash table version.
When processing NOT IN, the ScalarArrayOpExpr's operator will be the <>
operator. To be able to build and lookup a hash table we must use the
<>'s negator operator. The planner checks if that exists and is hashable
and sets the relevant fields in ScalarArrayOpExpr to instruct the executor
to use hashing.
Author: David Rowley, James Coleman
Reviewed-by: James Coleman, Zhihong Yu
Discussion: https://postgr.es/m/CAApHDvoF1mum_FRk6D621edcB6KSHBi2+GAgWmioj5AhOu2vwQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 2453ea142 redefined pg_proc.proargtypes to include the types of
OUT parameters, for procedures only. While that had some advantages
for implementing the SQL-spec behavior of DROP PROCEDURE, it was pretty
disastrous from a number of other perspectives. Notably, since the
primary key of pg_proc is name + proargtypes, this made it possible to
have multiple procedures with identical names + input arguments and
differing output argument types. That would make it impossible to call
any one of the procedures by writing just NULL (or "?", or any other
data-type-free notation) for the output argument(s). The change also
seems likely to cause grave confusion for client applications that
examine pg_proc and expect the traditional definition of proargtypes.
Hence, revert the definition of proargtypes to what it was, and
undo a number of complications that had been added to support that.
To support the SQL-spec behavior of DROP PROCEDURE, when there are
no argmode markers in the command's parameter list, we perform the
lookup both ways (that is, matching against both proargtypes and
proallargtypes), succeeding if we get just one unique match.
In principle this could result in ambiguous-function failures
that would not happen when using only one of the two rules.
However, overloading of procedure names is thought to be a pretty
rare usage, so this shouldn't cause many problems in practice.
Postgres-specific code such as pg_dump can defend against any
possibility of such failures by being careful to specify argmodes
for all procedure arguments.
This also fixes a few other bugs in the area of CALL statements
with named parameters, and improves the documentation a little.
catversion bump forced because the representation of procedures
with OUT arguments changes.
Discussion: https://postgr.es/m/3742981.1621533210@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ScalarArrayOpExprs with "useOr=true" and a set of Consts on the righthand
side have traditionally been evaluated by using a linear search over the
array. When these arrays contain large numbers of elements then this
linear search could become a significant part of execution time.
Here we add a new method of evaluating ScalarArrayOpExpr expressions to
allow them to be evaluated by first building a hash table containing each
element, then on subsequent evaluations, we just probe that hash table to
determine if there is a match.
The planner is in charge of determining when this optimization is possible
and it enables it by setting hashfuncid in the ScalarArrayOpExpr. The
executor will only perform the hash table evaluation when the hashfuncid
is set.
This means that not all cases are optimized. For example CHECK constraints
containing an IN clause won't go through the planner, so won't get the
hashfuncid set. We could maybe do something about that at some later
date. The reason we're not doing it now is from fear that we may slow
down cases where the expression is evaluated only once. Those cases can
be common, for example, a single row INSERT to a table with a CHECK
constraint containing an IN clause.
In the planner, we enable this when there are suitable hash functions for
the ScalarArrayOpExpr's operator and only when there is at least
MIN_ARRAY_SIZE_FOR_HASHED_SAOP elements in the array. The threshold is
currently set to 9.
Author: James Coleman, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Heikki Linnakangas
Discussion: https://postgr.es/m/CAAaqYe8x62+=wn0zvNKCj55tPpg-JBHzhZFFc6ANovdqFw7-dA@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
| |
This addresses more issues with code comments, variable names and
unreferenced variables.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/7ab243e0-116d-3e44-d120-76b3df7abefd@gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
| |
|
|
|
| |
This does not use the normal plural handling, because no numbers appear
in the actual message.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we reimplemented SRFs in commit 69f4b9c85, our initial choice was
to allow the behavior to vary from historical practice in cases where a
SRF call appeared within a conditional-execution construct (currently,
only CASE or COALESCE). But that was controversial to begin with, and
subsequent discussion has resulted in a consensus that it's better to
throw an error instead of executing the query differently from before,
so long as we can provide a reasonably clear error message and a way to
rewrite the query.
Hence, add a parser mechanism to allow detection of such cases during
parse analysis. The mechanism just requires storing, in the ParseState,
a pointer to the set-returning FuncExpr or OpExpr most recently emitted
by parse analysis. Then the parsing functions for CASE and COALESCE can
detect the presence of a SRF in their arguments by noting whether this
pointer changes while analyzing their arguments. Furthermore, if it does,
it provides a suitable error cursor location for the complaint. (This
means that if there's more than one SRF in the arguments, the error will
point at the last one to be analyzed not the first. While connoisseurs of
parsing behavior might find that odd, it's unlikely the average user would
ever notice.)
While at it, we can also provide more specific error messages than before
about some pre-existing restrictions, such as no-SRFs-within-aggregates.
Also, reject at parse time cases where a NULLIF or IS DISTINCT FROM
construct would need to return a set. We've never supported that, but the
restriction is depended on in more subtle ways now, so it seems wise to
detect it at the start.
Also, provide some documentation about how to rewrite a SRF-within-CASE
query using a custom wrapper SRF.
It turns out that the information_schema.user_mapping_options view
contained an instance of exactly the behavior we're now forbidding; but
rewriting it makes it more clear and safer too.
initdb forced because of user_mapping_options change.
Patch by me, with error message suggestions from Alvaro Herrera and
Andres Freund, pursuant to a complaint from Regina Obe.
Discussion: https://postgr.es/m/000001d2d5de$d8d66170$8a832450$@pcorp.us
|
| |
|
|
|
|
|
|
|
|
|
| |
The old function took function name and function argument list as
separate arguments. Now that all function signatures are passed around
as ObjectWithArgs structs, this is no longer necessary and can be
replaced by a function that takes ObjectWithArgs directly. Similarly
for aggregates and operators.
Reviewed-by: Jim Nasby <Jim.Nasby@BlueTreble.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
|
| |
|
|
| |
Backpatch certain files through 9.1
|
| |
|
|
|
|
|
|
| |
This makes any errors thrown while looking up such schemas report the
position of the error.
Author: Ryan Kelly
Reviewed by: Jeevan Chalke, Tom Lane
|
| |
|
|
| |
Backpatch certain files through 9.0
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
| |
These functions won't throw an error if the object doesn't exist,
or if (for functions and operators) there's more than one matching
object.
Yugo Nagata and Nozomi Anzai, reviewed by Amit Khandekar, Marti
Raudsepp, Amit Kapila, and me.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Some cases were still reporting errors and aborting, instead of a NOTICE
that the object was being skipped. This makes it more difficult to
cleanly handle pg_dump --clean, so change that to instead skip missing
objects properly.
Per bug #7873 reported by Dave Rolsky; apparently this affects a large
number of users.
Authors: Pavel Stehule and Dean Rasheed. Some tweaks by Álvaro Herrera
|
| |
|
|
|
| |
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
| |
|
|
|
|
| |
Previously, CREATE TABLE IF EXIST threw an error if the schema was
nonexistent. This was done by passing 'missing_ok' to the function that
looks up the schema oid.
|
| |
|
|
|
| |
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The existence of a btree opclass accepting composite types caused us to
assume that every composite type is sortable. This isn't true of course;
we need to check if the column types are all sortable. There was logic
for this for the case of array comparison (ie, check that the element
type is sortable), but we missed the point for rowtypes. Per Teodor's
report of an ANALYZE failure for an unsortable composite type.
Rather than just add some more ad-hoc logic for this, I moved knowledge of
the issue into typcache.c. The typcache will now only report out array_eq,
record_cmp, and friends as usable operators if the array or composite type
will work with those functions.
Unfortunately we don't have enough info to do this for anonymous RECORD
types; in that case, just assume it will work, and take the runtime failure
as before if it doesn't.
This patch might be a candidate for back-patching at some point, but
given the lack of complaints from the field, I'd rather just test it in
HEAD for now.
Note: most of the places touched in this patch will need further work
when we get around to supporting hashing of record types.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
|
| |
|
|
|
|
|
|
| |
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
|
| |
|
|
|
|
| |
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch eliminates various bizarre behaviors caused by sloppy thinking
about the difference between a domain type and its underlying array type.
In particular, the operation of updating one element of such an array
has to be considered as yielding a value of the underlying array type,
*not* a value of the domain, because there's no assurance that the
domain's CHECK constraints are still satisfied. If we're intending to
store the result back into a domain column, we have to re-cast to the
domain type so that constraints are re-checked.
For similar reasons, such a domain can't be blindly matched to an ANYARRAY
polymorphic parameter, because the polymorphic function is likely to apply
array-ish operations that could invalidate the domain constraints. For the
moment, we just forbid such matching. We might later wish to insert an
automatic downcast to the underlying array type, but such a change should
also change matching of domains to ANYELEMENT for consistency.
To ensure that all such logic is rechecked, this patch removes the original
hack of setting a domain's pg_type.typelem field to match its base type;
the typelem will always be zero instead. In those places where it's really
okay to look through the domain type with no other logic changes, use the
newly added get_base_element_type function in place of get_element_type.
catversion bumped due to change in pg_type contents.
Per bug #5717 from Richard Huxton and subsequent discussion.
|
| | |
|
| |
|
|
|
| |
A data-type-based solution, which is much cleaner and more bulletproof,
will follow shortly. It seemed best to make this a separate commit though.
|
