| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The macros INJECTION_POINT() and INJECTION_POINT_CACHED() are extended
with an optional argument that can be passed down to the callback
attached when an injection point is run, giving to callbacks the
possibility to manipulate a stack state given by the caller. The
existing callbacks in modules injection_points and test_aio have their
declarations adjusted based on that.
da7226993fd4 (core AIO infrastructure) and 93bc3d75d8e1 (test_aio) and
been relying on a set of workarounds where a static variable called
pgaio_inj_cur_handle is used as runtime argument in the injection point
callbacks used by the AIO tests, in combination with a TRY/CATCH block
to reset the argument value. The infrastructure introduced in this
commit will be reused for the AIO tests, simplifying them.
Reviewed-by: Greg Burd <greg@burd.me>
Discussion: https://postgr.es/m/Z_y9TtnXubvYAApS@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
| |
Remove (char *) casts around memory functions such as memcmp(),
memcpy(), or memset() where the cast is useless. Since these
functions don't take char * arguments anyway, these casts are at best
complicated casts to (void *), about which see commit 7f798aca1d5.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
| |
|
|
|
|
|
| |
This also makes it match the equivalent APIs in libpq.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
| |
|
|
| |
Backpatch-through: 13
|
| |
|
|
|
|
|
|
| |
as determined by IWYU
These are mostly issues that are new since commit dbbca2cf299.
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
| |
|
|
|
|
|
| |
The 'latch' argument is ignored if WL_LATCH_SET is not given. Clarify
these calls by not pointlessly passing MyLatch.
Discussion: https://www.postgresql.org/message-id/391abe21-413e-4d91-a650-b663af49500c@iki.fi
|
| |
|
|
|
|
|
|
| |
These test that libpq correctly falls back to a plaintext connection
on handshake error, in the "prefer" modes.
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAOYmi%2Bnwvu21mJ4DYKUa98HdfM_KZJi7B1MhyXtnsyOO-PB6Ww%40mail.gmail.com
|
| |
|
|
|
|
|
|
| |
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using GSSAPI encryption in non-blocking mode, libpq sometimes
failed with "GSSAPI caller failed to retransmit all data needing
to be retried". The cause is that pqPutMsgEnd rounds its transmit
request down to an even multiple of 8K, and sometimes that can lead
to not requesting a write of data that was requested to be written
(but reported as not written) earlier. That can upset pg_GSS_write's
logic for dealing with not-yet-written data, since it's possible
the data in question had already been incorporated into an encrypted
packet that we weren't able to send during the previous call.
We could fix this with a one-or-two-line hack to disable pqPutMsgEnd's
round-down behavior, but that seems like making the caller work around
a behavior that pg_GSS_write shouldn't expose in this way. Instead,
adjust pg_GSS_write to never report a partial write: it either
reports a complete write, or reflects the failure of the lower-level
pqsecure_raw_write call. The requirement still exists for the caller
to present at least as much data as on the previous call, but with
the caller-visible write start point not moving there is no temptation
for it to present less. We lose some ability to reclaim buffer space
early, but I doubt that that will make much difference in practice.
This also gets rid of a rather dubious assumption that "any
interesting failure condition (from pqsecure_raw_write) will recur
on the next try". We've not seen failure reports traceable to that,
but I've never trusted it particularly and am glad to remove it.
Make the same adjustments to the equivalent backend routine
be_gssapi_write(). It is probable that there's no bug on the backend
side, since we don't have a notion of nonblock mode there; but we
should keep the logic the same to ease future maintenance.
Per bug #18210 from Lars Kanis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18210-4c6d0b14627f2eb8@postgresql.org
|
| |
|
|
|
|
| |
This is more consistent with existing GUC spelling.
Discussion: https://postgr.es/m/ZGdnEsGtNj7+fZoa@momjian.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
| |
|
|
| |
Thinko in commit 6633cfb21, detected by buildfarm member hamerkop.
|
| |
|
|
|
|
|
|
|
|
| |
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
| |
This reverts commit 3d4fa227bce4294ce1cc214b4a9d3b7caa3f0454.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
|
| |
|
|
| |
Backpatch-through: 11
|
| |
|
|
| |
Backpatch-through: 10
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
secure_open_gssapi() installed the krb_server_keyfile setting as
KRB5_KTNAME unconditionally, so long as it's not empty. However,
pg_GSS_recvauth() only installed it if KRB5_KTNAME wasn't set already,
leading to a troubling inconsistency: in theory, clients could see
different sets of server principal names depending on whether they
use GSSAPI encryption. Always using krb_server_keyfile seems like
the right thing, so make both places do that. Also fix up
secure_open_gssapi()'s lack of a check for setenv() failure ---
it's unlikely, surely, but security-critical actions are no place
to be sloppy.
Also improve the associated documentation.
This patch does nothing about secure_open_gssapi()'s use of setenv(),
and indeed causes pg_GSS_recvauth() to use it too. That's nominally
against project portability rules, but since this code is only built
with --with-gssapi, I do not feel a need to do something about this
in the back branches. A fix will be forthcoming for HEAD though.
Back-patch to v12 where GSSAPI encryption was introduced. The
dubious behavior in pg_GSS_recvauth() goes back further, but it
didn't have anything to be inconsistent with, so let it be.
Discussion: https://postgr.es/m/2187460.1609263156@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unrecoverable errors detected by GSSAPI encryption can't just be
reported with elog(ERROR) or elog(FATAL), because attempting to
send the error report to the client is likely to lead to infinite
recursion or loss of protocol sync. Instead make this code do what
the SSL encryption code has long done, which is to just report any
such failure to the server log (with elevel COMMERROR), then pretend
we've lost the connection by returning errno = ECONNRESET.
Along the way, fix confusion about whether message translation is done
by pg_GSS_error() or its callers (the latter should do it), and make
the backend version of that function work more like the frontend
version.
Avoid allocating the port->gss struct until it's needed; we surely
don't need to allocate it in the postmaster.
Improve logging of "connection authorized" messages with GSS enabled.
(As part of this, I back-patched the code changes from dc11f31a1.)
Make BackendStatusShmemSize() account for the GSS-related space that
will be allocated by CreateSharedBackendStatus(). This omission
could possibly cause out-of-shared-memory problems with very high
max_connections settings.
Remove arbitrary, pointless restriction that only GSS authentication
can be used on a GSS-encrypted connection.
Improve documentation; notably, document the fact that libpq now
prefers GSS encryption over SSL encryption if both are possible.
Per report from Mikael Gustavsson. Back-patch to v12 where
this code was introduced.
Discussion: https://postgr.es/m/e5b0b6ed05764324a2f3fe7acfc766d5@smhi.se
|
| |
|
|
|
|
|
|
|
| |
The in-core equivalents can make use of built-in functions if the
compiler supports this option, making optimizations possible. 0ba99c8
replaced all existing calls in the code base at this time, but b0b39f7
(GSSAPI encryption) has forgotten to do the switch.
Discussion: https://postgr.es/m/20201014055303.GG3349@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Both the backend and libpq leaked buffers containing encrypted data
to be transmitted, so that the process size would grow roughly as
the total amount of data sent.
There were also far-less-critical leaks of the same sort in GSSAPI
session establishment.
Oversight in commit b0b39f72b, which I failed to notice while
reviewing the code in 2c0cdc818.
Per complaint from pmc@citylink.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200504115649.GA77072@gate.oper.dinoex.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix assorted bugs in handling of non-blocking I/O when using GSSAPI
encryption. The encryption layer could return the wrong status
information to its caller, resulting in effectively dropping some data
(or possibly in aborting a not-broken connection), or in a "livelock"
situation where data remains to be sent but the upper layers think
transmission is done and just go to sleep. There were multiple small
thinkos contributing to that, as well as one big one (failure to think
through what to do when a send fails after having already transmitted
data). Note that these errors could cause failures whether the client
application asked for non-blocking I/O or not, since both libpq and
the backend always run things in non-block mode at this level.
Also get rid of use of static variables for GSSAPI inside libpq;
that's entirely not okay given that multiple connections could be
open at once inside a single client process.
Also adjust a bunch of random small discrepancies between the frontend
and backend versions of the send/receive functions -- except for error
handling, they should be identical, and now they are.
Also extend the Kerberos TAP tests to exercise cases where nontrivial
amounts of data need to be pushed through encryption. Before, those
tests didn't provide any useful coverage at all for the cases of
interest here. (They still might not, depending on timing, but at
least there's a chance.)
Per complaint from pmc@citylink and subsequent investigation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200109181822.GA74698@gate.oper.dinoex.org
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
|
| |
Make the error messages around GSSAPI encryption a bit clearer. Tweak
some messages to avoid plural problems.
Also make a code change for clarity. Using "conf" for "confidential"
is quite confusing. Using "conf_state" is perhaps not much better but
that's what the GSSAPI documentation uses, so there is at least some
hope of understanding it.
|
| |
|
|
|
|
|
|
|
| |
libpq/libpq-be.h is included by libpq/libpq.h so there is no need to
explicitly include it separately.
Author: Daniel Gustafsson
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/A4852E46-9ED1-4861-A23B-22A83E34A084@yesql.se
|
| |
|
|
|
| |
Author: Alexander Lakhin
Discussion: https://postgr.es/m/dec6aae8-2d63-639f-4d50-20e229fb83e3@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
The file has been introduced in src/backend/libpq/ as of b0b39f72, but
all backend-side headers of libpq are located in src/include/libpq/.
Note that the identification path on top of the file referred to
src/include/libpq/ from the start.
Author: Michael Paquier
Reviewed-by: Stephen Frost
Discussion: https://postgr.es/m/20190607043415.GE1736@paquier.xyz
|
| |
|
|
|
| |
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA%2BhUKGJFWXmtYo6Frd77RR8YXCHz7hJ2mRy5aHV%3D7fJOqDnBHA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
I noted that some buildfarm members were complaining about %ld being
used to format values that are (probably) declared size_t. Use %zu
instead, and insert a cast just in case some versions of the GSSAPI
API declare the length field differently. While at it, clean up
gratuitous differences in wording of equivalent messages, show
the complained-of length in all relevant messages not just some,
include trailing newline where needed, adjust random deviations
from project-standard code layout and message style, etc.
|
|
|
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
|
