aboutsummaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/btree.c82
-rw-r--r--src/btree.h4
-rw-r--r--src/build.c24
-rw-r--r--src/delete.c19
-rw-r--r--src/insert.c17
-rw-r--r--src/sqlite.h.in29
-rw-r--r--src/test3.c12
-rw-r--r--src/tokenize.c5
-rw-r--r--src/update.c17
-rw-r--r--src/util.c5
-rw-r--r--src/vdbe.c94
-rw-r--r--src/vdbe.h223
12 files changed, 314 insertions, 217 deletions
diff --git a/src/btree.c b/src/btree.c
index 09742e62c..909ead07d 100644
--- a/src/btree.c
+++ b/src/btree.c
@@ -9,7 +9,7 @@
** May you share freely, never taking more than you give.
**
*************************************************************************
-** $Id: btree.c,v 1.29 2001/09/16 00:13:26 drh Exp $
+** $Id: btree.c,v 1.30 2001/09/23 02:35:53 drh Exp $
**
** This file implements a external (disk-based) database using BTrees.
** For a detailed discussion of BTrees, refer to
@@ -312,6 +312,7 @@ struct Btree {
BtCursor *pCursor; /* A list of all open cursors */
PageOne *page1; /* First page of the database */
int inTrans; /* True if a transaction is in progress */
+ Hash locks; /* Key: root page number. Data: lock count */
};
typedef Btree Bt;
@@ -326,6 +327,7 @@ struct BtCursor {
Pgno pgnoRoot; /* The root page of this tree */
MemPage *pPage; /* Page that contains the entry */
int idx; /* Index of the entry in pPage->apCell[] */
+ u8 wrFlag; /* True if writable */
u8 bSkipNext; /* sqliteBtreeNext() is no-op if true */
u8 iMatch; /* compare result from last sqliteBtreeMoveto() */
};
@@ -619,6 +621,7 @@ int sqliteBtreeOpen(
sqlitepager_set_destructor(pBt->pPager, pageDestructor);
pBt->pCursor = 0;
pBt->page1 = 0;
+ sqliteHashInit(&pBt->locks, SQLITE_HASH_INT, 0);
*ppBtree = pBt;
return SQLITE_OK;
}
@@ -631,6 +634,7 @@ int sqliteBtreeClose(Btree *pBt){
sqliteBtreeCloseCursor(pBt->pCursor);
}
sqlitepager_close(pBt->pPager);
+ sqliteHashClear(&pBt->locks);
sqliteFree(pBt);
return SQLITE_OK;
}
@@ -771,17 +775,25 @@ int sqliteBtreeCommit(Btree *pBt){
}
/*
-** Rollback the transaction in progress. All cursors must be
-** closed before this routine is called.
+** Rollback the transaction in progress. All cursors will be
+** invalided by this operation. Any attempt to use a cursor
+** that was open at the beginning of this operation will result
+** in an error.
**
** This will release the write lock on the database file. If there
** are no active cursors, it also releases the read lock.
*/
int sqliteBtreeRollback(Btree *pBt){
int rc;
- if( pBt->pCursor!=0 ) return SQLITE_ERROR;
+ BtCursor *pCur;
if( pBt->inTrans==0 ) return SQLITE_OK;
pBt->inTrans = 0;
+ for(pCur=pBt->pCursor; pCur; pCur=pCur->pNext){
+ if( pCur->pPage ){
+ sqlitepager_unref(pCur->pPage);
+ pCur->pPage = 0;
+ }
+ }
rc = sqlitepager_rollback(pBt->pPager);
unlockBtreeIfUnused(pBt);
return rc;
@@ -792,9 +804,11 @@ int sqliteBtreeRollback(Btree *pBt){
** iTable. The act of acquiring a cursor gets a read lock on
** the database file.
*/
-int sqliteBtreeCursor(Btree *pBt, int iTable, BtCursor **ppCur){
+int sqliteBtreeCursor(Btree *pBt, int iTable, int wrFlag, BtCursor **ppCur){
int rc;
BtCursor *pCur;
+ int nLock;
+
if( pBt->page1==0 ){
rc = lockBtree(pBt);
if( rc!=SQLITE_OK ){
@@ -816,7 +830,15 @@ int sqliteBtreeCursor(Btree *pBt, int iTable, BtCursor **ppCur){
if( rc!=SQLITE_OK ){
goto create_cursor_exception;
}
+ nLock = (int)sqliteHashFind(&pBt->locks, 0, iTable);
+ if( nLock<0 || (nLock>0 && wrFlag) ){
+ rc = SQLITE_LOCKED;
+ goto create_cursor_exception;
+ }
+ nLock = wrFlag ? -1 : nLock+1;
+ sqliteHashInsert(&pBt->locks, 0, iTable, (void*)nLock);
pCur->pBt = pBt;
+ pCur->wrFlag = wrFlag;
pCur->idx = 0;
pCur->pNext = pBt->pCursor;
if( pCur->pNext ){
@@ -842,6 +864,7 @@ create_cursor_exception:
** when the last cursor is closed.
*/
int sqliteBtreeCloseCursor(BtCursor *pCur){
+ int nLock;
Btree *pBt = pCur->pBt;
if( pCur->pPrev ){
pCur->pPrev->pNext = pCur->pNext;
@@ -851,8 +874,14 @@ int sqliteBtreeCloseCursor(BtCursor *pCur){
if( pCur->pNext ){
pCur->pNext->pPrev = pCur->pPrev;
}
- sqlitepager_unref(pCur->pPage);
+ if( pCur->pPage ){
+ sqlitepager_unref(pCur->pPage);
+ }
unlockBtreeIfUnused(pBt);
+ nLock = (int)sqliteHashFind(&pBt->locks, 0, pCur->pgnoRoot);
+ assert( nLock!=0 );
+ nLock = nLock<0 ? 0 : nLock-1;
+ sqliteHashInsert(&pBt->locks, 0, pCur->pgnoRoot, (void*)nLock);
sqliteFree(pCur);
return SQLITE_OK;
}
@@ -865,7 +894,9 @@ static void getTempCursor(BtCursor *pCur, BtCursor *pTempCur){
memcpy(pTempCur, pCur, sizeof(*pCur));
pTempCur->pNext = 0;
pTempCur->pPrev = 0;
- sqlitepager_ref(pTempCur->pPage);
+ if( pTempCur->pPage ){
+ sqlitepager_ref(pTempCur->pPage);
+ }
}
/*
@@ -873,7 +904,9 @@ static void getTempCursor(BtCursor *pCur, BtCursor *pTempCur){
** function above.
*/
static void releaseTempCursor(BtCursor *pCur){
- sqlitepager_unref(pCur->pPage);
+ if( pCur->pPage ){
+ sqlitepager_unref(pCur->pPage);
+ }
}
/*
@@ -888,8 +921,7 @@ int sqliteBtreeKeySize(BtCursor *pCur, int *pSize){
MemPage *pPage;
pPage = pCur->pPage;
- assert( pPage!=0 );
- if( pCur->idx >= pPage->nCell ){
+ if( pPage==0 || pCur->idx >= pPage->nCell ){
*pSize = 0;
}else{
pCell = pPage->apCell[pCur->idx];
@@ -971,7 +1003,7 @@ int sqliteBtreeKey(BtCursor *pCur, int offset, int amt, char *zBuf){
if( offset<0 ) return 0;
if( amt==0 ) return 0;
pPage = pCur->pPage;
- assert( pPage!=0 );
+ if( pPage==0 ) return 0;
if( pCur->idx >= pPage->nCell ){
return 0;
}
@@ -998,8 +1030,7 @@ int sqliteBtreeDataSize(BtCursor *pCur, int *pSize){
MemPage *pPage;
pPage = pCur->pPage;
- assert( pPage!=0 );
- if( pCur->idx >= pPage->nCell ){
+ if( pPage==0 || pCur->idx >= pPage->nCell ){
*pSize = 0;
}else{
pCell = pPage->apCell[pCur->idx];
@@ -1024,8 +1055,7 @@ int sqliteBtreeData(BtCursor *pCur, int offset, int amt, char *zBuf){
if( offset<0 ) return 0;
if( amt==0 ) return 0;
pPage = pCur->pPage;
- assert( pPage!=0 );
- if( pCur->idx >= pPage->nCell ){
+ if( pPage==0 || pCur->idx >= pPage->nCell ){
return 0;
}
pCell = pPage->apCell[pCur->idx];
@@ -1190,6 +1220,7 @@ static int moveToLeftmost(BtCursor *pCur){
*/
int sqliteBtreeFirst(BtCursor *pCur, int *pRes){
int rc;
+ if( pCur->pPage==0 ) return SQLITE_ABORT;
rc = moveToRoot(pCur);
if( rc ) return rc;
if( pCur->pPage->nCell==0 ){
@@ -1225,6 +1256,7 @@ int sqliteBtreeFirst(BtCursor *pCur, int *pRes){
*/
int sqliteBtreeMoveto(BtCursor *pCur, const void *pKey, int nKey, int *pRes){
int rc;
+ if( pCur->pPage==0 ) return SQLITE_ABORT;
pCur->bSkipNext = 0;
rc = moveToRoot(pCur);
if( rc ) return rc;
@@ -1275,6 +1307,9 @@ int sqliteBtreeMoveto(BtCursor *pCur, const void *pKey, int nKey, int *pRes){
*/
int sqliteBtreeNext(BtCursor *pCur, int *pRes){
int rc;
+ if( pCur->pPage==0 ){
+ return SQLITE_ABORT;
+ }
if( pCur->bSkipNext ){
pCur->bSkipNext = 0;
if( pRes ) *pRes = 0;
@@ -2045,9 +2080,15 @@ int sqliteBtreeInsert(
MemPage *pPage;
Btree *pBt = pCur->pBt;
+ if( pCur->pPage==0 ){
+ return SQLITE_ABORT; /* A rollback destroyed this cursor */
+ }
if( !pCur->pBt->inTrans || nKey+nData==0 ){
return SQLITE_ERROR; /* Must start a transaction first */
}
+ if( !pCur->wrFlag ){
+ return SQLITE_PERM; /* Cursor not open for writing */
+ }
rc = sqliteBtreeMoveto(pCur, pKey, nKey, &loc);
if( rc ) return rc;
pPage = pCur->pPage;
@@ -2090,12 +2131,18 @@ int sqliteBtreeDelete(BtCursor *pCur){
int rc;
Pgno pgnoChild;
+ if( pCur->pPage==0 ){
+ return SQLITE_ABORT; /* A rollback destroyed this cursor */
+ }
if( !pCur->pBt->inTrans ){
return SQLITE_ERROR; /* Must start a transaction first */
}
if( pCur->idx >= pPage->nCell ){
return SQLITE_ERROR; /* The cursor is not pointing to anything */
}
+ if( !pCur->wrFlag ){
+ return SQLITE_PERM; /* Did not open this cursor for writing */
+ }
rc = sqlitepager_write(pPage);
if( rc ) return rc;
pCell = pPage->apCell[pCur->idx];
@@ -2207,9 +2254,14 @@ static int clearDatabasePage(Btree *pBt, Pgno pgno, int freePageFlag){
*/
int sqliteBtreeClearTable(Btree *pBt, int iTable){
int rc;
+ int nLock;
if( !pBt->inTrans ){
return SQLITE_ERROR; /* Must start a transaction first */
}
+ nLock = (int)sqliteHashFind(&pBt->locks, 0, iTable);
+ if( nLock ){
+ return SQLITE_LOCKED;
+ }
rc = clearDatabasePage(pBt, (Pgno)iTable, 0);
if( rc ){
sqliteBtreeRollback(pBt);
diff --git a/src/btree.h b/src/btree.h
index 02cd9b59e..4efd718e6 100644
--- a/src/btree.h
+++ b/src/btree.h
@@ -12,7 +12,7 @@
** This header file defines the interface that the sqlite B-Tree file
** subsystem.
**
-** @(#) $Id: btree.h,v 1.14 2001/09/16 00:13:26 drh Exp $
+** @(#) $Id: btree.h,v 1.15 2001/09/23 02:35:53 drh Exp $
*/
#ifndef _BTREE_H_
#define _BTREE_H_
@@ -32,7 +32,7 @@ int sqliteBtreeCreateTable(Btree*, int*);
int sqliteBtreeDropTable(Btree*, int);
int sqliteBtreeClearTable(Btree*, int);
-int sqliteBtreeCursor(Btree*, int iTable, BtCursor **ppCur);
+int sqliteBtreeCursor(Btree*, int iTable, int wrFlag, BtCursor **ppCur);
int sqliteBtreeMoveto(BtCursor*, const void *pKey, int nKey, int *pRes);
int sqliteBtreeDelete(BtCursor*);
int sqliteBtreeInsert(BtCursor*, const void *pKey, int nKey,
diff --git a/src/build.c b/src/build.c
index 2f05e368b..24862028c 100644
--- a/src/build.c
+++ b/src/build.c
@@ -25,7 +25,7 @@
** ROLLBACK
** PRAGMA
**
-** $Id: build.c,v 1.38 2001/09/22 18:12:10 drh Exp $
+** $Id: build.c,v 1.39 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
#include <ctype.h>
@@ -54,6 +54,7 @@ void sqliteExec(Parse *pParse){
rc = sqliteVdbeExec(pParse->pVdbe, pParse->xCallback, pParse->pArg,
&pParse->zErrMsg, db->pBusyArg,
db->xBusyCallback);
+ if( rc ) pParse->nErr++;
}
sqliteVdbeDelete(pParse->pVdbe);
pParse->pVdbe = 0;
@@ -372,6 +373,7 @@ void sqliteStartTable(Parse *pParse, Token *pStart, Token *pName){
if( v ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
}
}
@@ -502,7 +504,7 @@ void sqliteEndTable(Parse *pParse, Token *pEnd){
v = sqliteGetVdbe(pParse);
if( v==0 ) return;
n = (int)pEnd->z - (int)pParse->sFirstToken.z + 1;
- sqliteVdbeAddOp(v, OP_Open, 0, 2, MASTER_NAME, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, 0, 2, MASTER_NAME, 0);
sqliteVdbeAddOp(v, OP_NewRecno, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_String, 0, 0, "table", 0);
sqliteVdbeAddOp(v, OP_String, 0, 0, p->zName, 0);
@@ -583,7 +585,7 @@ void sqliteDropTable(Parse *pParse, Token *pName){
v = sqliteGetVdbe(pParse);
if( v ){
static VdbeOp dropTable[] = {
- { OP_Open, 0, 2, MASTER_NAME},
+ { OP_OpenWrite, 0, 2, MASTER_NAME},
{ OP_Rewind, 0, 0, 0},
{ OP_String, 0, 0, 0}, /* 2 */
{ OP_Next, 0, ADDR(9), 0}, /* 3 */
@@ -600,6 +602,7 @@ void sqliteDropTable(Parse *pParse, Token *pName){
if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
base = sqliteVdbeAddOpList(v, ArraySize(dropTable), dropTable);
sqliteVdbeChangeP3(v, base+2, pTable->zName, 0);
@@ -779,14 +782,14 @@ void sqliteCreateIndex(
*/
else if( pParse->initFlag==0 && pTable!=0 ){
static VdbeOp addTable[] = {
- { OP_Open, 2, 2, MASTER_NAME},
+ { OP_OpenWrite, 2, 2, MASTER_NAME},
{ OP_NewRecno, 2, 0, 0},
{ OP_String, 0, 0, "index"},
{ OP_String, 0, 0, 0}, /* 3 */
{ OP_String, 0, 0, 0}, /* 4 */
{ OP_CreateIndex, 1, 0, 0},
{ OP_Dup, 0, 0, 0},
- { OP_Open, 1, 0, 0}, /* 7 */
+ { OP_OpenWrite, 1, 0, 0}, /* 7 */
{ OP_Null, 0, 0, 0},
{ OP_String, 0, 0, 0}, /* 9 */
{ OP_MakeRecord, 6, 0, 0},
@@ -804,6 +807,7 @@ void sqliteCreateIndex(
if( pTable!=0 && (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
if( pStart && pEnd ){
int base;
@@ -875,7 +879,7 @@ void sqliteDropIndex(Parse *pParse, Token *pName){
v = sqliteGetVdbe(pParse);
if( v ){
static VdbeOp dropIndex[] = {
- { OP_Open, 0, 2, MASTER_NAME},
+ { OP_OpenWrite, 0, 2, MASTER_NAME},
{ OP_Rewind, 0, 0, 0},
{ OP_String, 0, 0, 0}, /* 2 */
{ OP_Next, 0, ADDR(8), 0}, /* 3 */
@@ -892,6 +896,7 @@ void sqliteDropIndex(Parse *pParse, Token *pName){
if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
base = sqliteVdbeAddOpList(v, ArraySize(dropIndex), dropIndex);
sqliteVdbeChangeP3(v, base+2, pIndex->zName, 0);
@@ -1065,13 +1070,14 @@ void sqliteCopy(
if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
addr = sqliteVdbeAddOp(v, OP_FileOpen, 0, 0, 0, 0);
sqliteVdbeChangeP3(v, addr, pFilename->z, pFilename->n);
sqliteVdbeDequoteP3(v, addr);
- sqliteVdbeAddOp(v, OP_Open, 0, pTab->tnum, pTab->zName, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, 0, pTab->tnum, pTab->zName, 0);
for(i=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, i++){
- sqliteVdbeAddOp(v, OP_Open, i, pIdx->tnum, pIdx->zName, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, i, pIdx->tnum, pIdx->zName, 0);
}
end = sqliteVdbeMakeLabel(v);
addr = sqliteVdbeAddOp(v, OP_FileRead, pTab->nCol, end, 0, 0);
@@ -1138,6 +1144,7 @@ void sqliteVacuum(Parse *pParse, Token *pTableName){
if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
if( zName ){
sqliteVdbeAddOp(v, OP_Reorganize, 0, 0, zName, 0);
@@ -1176,6 +1183,7 @@ void sqliteBeginTransaction(Parse *pParse){
if( v ){
sqliteVdbeAddOp(v, OP_Transaction, 1, 0, 0, 0);
sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
db->flags |= SQLITE_InTrans;
}
diff --git a/src/delete.c b/src/delete.c
index 2b712307b..120295b5f 100644
--- a/src/delete.c
+++ b/src/delete.c
@@ -12,7 +12,7 @@
** This file contains C code routines that are called by the parser
** to handle DELETE FROM statements.
**
-** $Id: delete.c,v 1.14 2001/09/16 00:13:27 drh Exp $
+** $Id: delete.c,v 1.15 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
@@ -32,11 +32,13 @@ void sqliteDeleteFrom(
WhereInfo *pWInfo; /* Information about the WHERE clause */
Index *pIdx; /* For looping over indices of the table */
int base; /* Index of the first available table cursor */
+ sqlite *db; /* Main database structure */
if( pParse->nErr || sqlite_malloc_failed ){
pTabList = 0;
goto delete_from_cleanup;
}
+ db = pParse->db;
/* Locate the table which we want to delete. This table has to be
** put in an IdList structure because some of the subroutines we
@@ -46,7 +48,7 @@ void sqliteDeleteFrom(
pTabList = sqliteIdListAppend(0, pTableName);
if( pTabList==0 ) goto delete_from_cleanup;
for(i=0; i<pTabList->nId; i++){
- pTabList->a[i].pTab = sqliteFindTable(pParse->db, pTabList->a[i].zName);
+ pTabList->a[i].pTab = sqliteFindTable(db, pTabList->a[i].zName);
if( pTabList->a[i].pTab==0 ){
sqliteSetString(&pParse->zErrMsg, "no such table: ",
pTabList->a[i].zName, 0);
@@ -78,14 +80,15 @@ void sqliteDeleteFrom(
*/
v = sqliteGetVdbe(pParse);
if( v==0 ) goto delete_from_cleanup;
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
- sqliteVdbeAddOp(v, OP_VerifyCookie, pParse->db->schema_cookie, 0, 0, 0);
+ sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
/* Special case: A DELETE without a WHERE clause deletes everything.
- ** It is easier just to clear all information the database tables directly.
+ ** It is easier just to erase the whole table.
*/
if( pWhere==0 ){
sqliteVdbeAddOp(v, OP_Clear, pTab->tnum, 0, 0, 0);
@@ -118,9 +121,9 @@ void sqliteDeleteFrom(
*/
base = pParse->nTab;
sqliteVdbeAddOp(v, OP_ListRewind, 0, 0, 0, 0);
- sqliteVdbeAddOp(v, OP_Open, base, pTab->tnum, 0, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, base, pTab->tnum, 0, 0);
for(i=1, pIdx=pTab->pIndex; pIdx; i++, pIdx=pIdx->pNext){
- sqliteVdbeAddOp(v, OP_Open, base+i, pIdx->tnum, 0, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, base+i, pIdx->tnum, 0, 0);
}
end = sqliteVdbeMakeLabel(v);
addr = sqliteVdbeAddOp(v, OP_ListRead, 0, end, 0, 0);
@@ -140,7 +143,7 @@ void sqliteDeleteFrom(
sqliteVdbeAddOp(v, OP_Goto, 0, addr, 0, 0);
sqliteVdbeAddOp(v, OP_ListClose, 0, 0, 0, end);
}
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Commit, 0, 0, 0, 0);
}
diff --git a/src/insert.c b/src/insert.c
index 3fcb61e70..8de423f67 100644
--- a/src/insert.c
+++ b/src/insert.c
@@ -12,7 +12,7 @@
** This file contains C code routines that are called by the parser
** to handle INSERT statements in SQLite.
**
-** $Id: insert.c,v 1.18 2001/09/16 00:13:27 drh Exp $
+** $Id: insert.c,v 1.19 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
@@ -47,14 +47,16 @@ void sqliteInsert(
int nColumn; /* Number of columns in the data */
int base; /* First available cursor */
int iCont, iBreak; /* Beginning and end of the loop over srcTab */
+ sqlite *db; /* The main database structure */
if( pParse->nErr || sqlite_malloc_failed ) goto insert_cleanup;
+ db = pParse->db;
/* Locate the table into which we will be inserting new information.
*/
zTab = sqliteTableNameFromToken(pTableName);
if( zTab==0 ) goto insert_cleanup;
- pTab = sqliteFindTable(pParse->db, zTab);
+ pTab = sqliteFindTable(db, zTab);
sqliteFree(zTab);
if( pTab==0 ){
sqliteSetNString(&pParse->zErrMsg, "no such table: ", 0,
@@ -73,9 +75,10 @@ void sqliteInsert(
*/
v = sqliteGetVdbe(pParse);
if( v==0 ) goto insert_cleanup;
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
- sqliteVdbeAddOp(v, OP_VerifyCookie, pParse->db->schema_cookie, 0, 0, 0);
+ sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
/* Figure out how many columns of data are supplied. If the data
@@ -152,9 +155,9 @@ void sqliteInsert(
** all indices of that table.
*/
base = pParse->nTab;
- sqliteVdbeAddOp(v, OP_Open, base, pTab->tnum, pTab->zName, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, base, pTab->tnum, pTab->zName, 0);
for(idx=1, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, idx++){
- sqliteVdbeAddOp(v, OP_Open, idx+base, pIdx->tnum, pIdx->zName, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, idx+base, pIdx->tnum, pIdx->zName, 0);
}
/* If the data source is a SELECT statement, then we have to create
@@ -237,7 +240,7 @@ void sqliteInsert(
sqliteVdbeAddOp(v, OP_Goto, 0, iCont, 0, 0);
sqliteVdbeAddOp(v, OP_Noop, 0, 0, 0, iBreak);
}
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Commit, 0, 0, 0, 0);
}
diff --git a/src/sqlite.h.in b/src/sqlite.h.in
index 952983716..6d56498b5 100644
--- a/src/sqlite.h.in
+++ b/src/sqlite.h.in
@@ -12,7 +12,7 @@
** This header file defines the interface that the SQLite library
** presents to client programs.
**
-** @(#) $Id: sqlite.h.in,v 1.18 2001/09/20 01:44:43 drh Exp $
+** @(#) $Id: sqlite.h.in,v 1.19 2001/09/23 02:35:53 drh Exp $
*/
#ifndef _SQLITE_H_
#define _SQLITE_H_
@@ -138,19 +138,20 @@ int sqlite_exec(
#define SQLITE_INTERNAL 2 /* An internal logic error in SQLite */
#define SQLITE_PERM 3 /* Access permission denied */
#define SQLITE_ABORT 4 /* Callback routine requested an abort */
-#define SQLITE_BUSY 5 /* One or more database files are locked */
-#define SQLITE_NOMEM 6 /* A malloc() failed */
-#define SQLITE_READONLY 7 /* Attempt to write a readonly database */
-#define SQLITE_INTERRUPT 8 /* Operation terminated by sqlite_interrupt() */
-#define SQLITE_IOERR 9 /* Some kind of disk I/O error occurred */
-#define SQLITE_CORRUPT 10 /* The database disk image is malformed */
-#define SQLITE_NOTFOUND 11 /* (Internal Only) Table or record not found */
-#define SQLITE_FULL 12 /* Insertion failed because database is full */
-#define SQLITE_CANTOPEN 13 /* Unable to open the database file */
-#define SQLITE_PROTOCOL 14 /* Database lock protocol error */
-#define SQLITE_EMPTY 15 /* (Internal Only) Database table is empty */
-#define SQLITE_SCHEMA 16 /* The database schema changed */
-#define SQLITE_TOOBIG 17 /* Too much data for one row of a table */
+#define SQLITE_BUSY 5 /* The database file is locked */
+#define SQLITE_LOCKED 6 /* A table in the database is locked */
+#define SQLITE_NOMEM 7 /* A malloc() failed */
+#define SQLITE_READONLY 8 /* Attempt to write a readonly database */
+#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite_interrupt() */
+#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
+#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
+#define SQLITE_NOTFOUND 12 /* (Internal Only) Table or record not found */
+#define SQLITE_FULL 13 /* Insertion failed because database is full */
+#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
+#define SQLITE_PROTOCOL 15 /* Database lock protocol error */
+#define SQLITE_EMPTY 16 /* (Internal Only) Database table is empty */
+#define SQLITE_SCHEMA 17 /* The database schema changed */
+#define SQLITE_TOOBIG 18 /* Too much data for one row of a table */
/* This function causes any pending database operation to abort and
** return at its earliest opportunity. This routine is typically
diff --git a/src/test3.c b/src/test3.c
index 9dd084105..978631159 100644
--- a/src/test3.c
+++ b/src/test3.c
@@ -13,7 +13,7 @@
** is not included in the SQLite library. It is used for automated
** testing of the SQLite library.
**
-** $Id: test3.c,v 1.11 2001/09/16 00:13:27 drh Exp $
+** $Id: test3.c,v 1.12 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
#include "pager.h"
@@ -499,7 +499,7 @@ static int btree_sanity_check(
}
/*
-** Usage: btree_cursor ID TABLENUM
+** Usage: btree_cursor ID TABLENUM WRITEABLE
**
** Create a new cursor. Return the ID for the cursor.
*/
@@ -513,16 +513,18 @@ static int btree_cursor(
int iTable;
BtCursor *pCur;
int rc;
+ int wrFlag;
char zBuf[30];
- if( argc!=3 ){
+ if( argc!=4 ){
Tcl_AppendResult(interp, "wrong # args: should be \"", argv[0],
- " ID TABLENUM\"", 0);
+ " ID TABLENUM WRITEABLE\"", 0);
return TCL_ERROR;
}
if( Tcl_GetInt(interp, argv[1], (int*)&pBt) ) return TCL_ERROR;
if( Tcl_GetInt(interp, argv[2], &iTable) ) return TCL_ERROR;
- rc = sqliteBtreeCursor(pBt, iTable, &pCur);
+ if( Tcl_GetBoolean(interp, argv[3], &wrFlag) ) return TCL_ERROR;
+ rc = sqliteBtreeCursor(pBt, iTable, wrFlag, &pCur);
if( rc ){
Tcl_AppendResult(interp, errorName(rc), 0);
return TCL_ERROR;
diff --git a/src/tokenize.c b/src/tokenize.c
index be9711321..53ebbbf1a 100644
--- a/src/tokenize.c
+++ b/src/tokenize.c
@@ -15,7 +15,7 @@
** individual tokens and sends those tokens one-by-one over to the
** parser for analysis.
**
-** $Id: tokenize.c,v 1.22 2001/09/16 00:13:27 drh Exp $
+** $Id: tokenize.c,v 1.23 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
#include <ctype.h>
@@ -353,6 +353,9 @@ int sqliteRunParser(Parse *pParse, char *zSql, char **pzErrMsg){
nErr++;
sqliteFree(pParse->zErrMsg);
pParse->zErrMsg = 0;
+ }else if( pParse->rc!=SQLITE_OK ){
+ sqliteSetString(pzErrMsg, sqliteErrStr(pParse->rc), 0);
+ nErr++;
}
break;
}
diff --git a/src/update.c b/src/update.c
index 62c024118..fb67ac66b 100644
--- a/src/update.c
+++ b/src/update.c
@@ -12,7 +12,7 @@
** This file contains C code routines that are called by the parser
** to handle UPDATE statements.
**
-** $Id: update.c,v 1.14 2001/09/16 00:13:27 drh Exp $
+** $Id: update.c,v 1.15 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
@@ -34,12 +34,14 @@ void sqliteUpdate(
Index *pIdx; /* For looping over indices */
int nIdx; /* Number of indices that need updating */
int base; /* Index of first available table cursor */
+ sqlite *db; /* The database structure */
Index **apIdx = 0; /* An array of indices that need updating too */
int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the
** an expression for the i-th column of the table.
** aXRef[i]==-1 if the i-th column is not changed. */
if( pParse->nErr || sqlite_malloc_failed ) goto update_cleanup;
+ db = pParse->db;
/* Locate the table which we want to update. This table has to be
** put in an IdList structure because some of the subroutines we
@@ -49,7 +51,7 @@ void sqliteUpdate(
pTabList = sqliteIdListAppend(0, pTableName);
if( pTabList==0 ) goto update_cleanup;
for(i=0; i<pTabList->nId; i++){
- pTabList->a[i].pTab = sqliteFindTable(pParse->db, pTabList->a[i].zName);
+ pTabList->a[i].pTab = sqliteFindTable(db, pTabList->a[i].zName);
if( pTabList->a[i].pTab==0 ){
sqliteSetString(&pParse->zErrMsg, "no such table: ",
pTabList->a[i].zName, 0);
@@ -132,9 +134,10 @@ void sqliteUpdate(
*/
v = sqliteGetVdbe(pParse);
if( v==0 ) goto update_cleanup;
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Transaction, 0, 0, 0, 0);
- sqliteVdbeAddOp(v, OP_VerifyCookie, pParse->db->schema_cookie, 0, 0, 0);
+ sqliteVdbeAddOp(v, OP_VerifyCookie, db->schema_cookie, 0, 0, 0);
+ pParse->schemaVerified = 1;
}
/* Begin the database scan
@@ -156,9 +159,9 @@ void sqliteUpdate(
*/
sqliteVdbeAddOp(v, OP_ListRewind, 0, 0, 0, 0);
base = pParse->nTab;
- sqliteVdbeAddOp(v, OP_Open, base, pTab->tnum, 0, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, base, pTab->tnum, 0, 0);
for(i=0; i<nIdx; i++){
- sqliteVdbeAddOp(v, OP_Open, base+i+1, apIdx[i]->tnum, 0, 0);
+ sqliteVdbeAddOp(v, OP_OpenWrite, base+i+1, apIdx[i]->tnum, 0, 0);
}
/* Loop over every record that needs updating. We have to load
@@ -216,7 +219,7 @@ void sqliteUpdate(
*/
sqliteVdbeAddOp(v, OP_Goto, 0, addr, 0, 0);
sqliteVdbeAddOp(v, OP_ListClose, 0, 0, 0, end);
- if( (pParse->db->flags & SQLITE_InTrans)==0 ){
+ if( (db->flags & SQLITE_InTrans)==0 ){
sqliteVdbeAddOp(v, OP_Commit, 0, 0, 0, 0);
}
diff --git a/src/util.c b/src/util.c
index 02f9443e2..e12c0a9e9 100644
--- a/src/util.c
+++ b/src/util.c
@@ -14,7 +14,7 @@
** This file contains functions for allocating memory, comparing
** strings, and stuff like that.
**
-** $Id: util.c,v 1.27 2001/09/19 13:22:40 drh Exp $
+** $Id: util.c,v 1.28 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
#include <stdarg.h>
@@ -973,7 +973,8 @@ const char *sqliteErrStr(int rc){
case SQLITE_INTERNAL: z = "internal SQLite implementation flaw"; break;
case SQLITE_PERM: z = "access permission denied"; break;
case SQLITE_ABORT: z = "callback requested query abort"; break;
- case SQLITE_BUSY: z = "database in use by another process"; break;
+ case SQLITE_BUSY: z = "database is locked"; break;
+ case SQLITE_LOCKED: z = "database table is locked"; break;
case SQLITE_NOMEM: z = "out of memory"; break;
case SQLITE_READONLY: z = "attempt to write a readonly database"; break;
case SQLITE_INTERRUPT: z = "interrupted"; break;
diff --git a/src/vdbe.c b/src/vdbe.c
index 19fb9663c..88fcaa2a3 100644
--- a/src/vdbe.c
+++ b/src/vdbe.c
@@ -30,7 +30,7 @@
** But other routines are also provided to help in building up
** a program instruction by instruction.
**
-** $Id: vdbe.c,v 1.73 2001/09/22 18:12:10 drh Exp $
+** $Id: vdbe.c,v 1.74 2001/09/23 02:35:53 drh Exp $
*/
#include "sqliteInt.h"
#include <ctype.h>
@@ -676,6 +676,19 @@ static void cleanupCursor(Cursor *pCx){
}
/*
+** Close all cursors
+*/
+static void closeAllCursors(Vdbe *p){
+ int i;
+ for(i=0; i<p->nCursor; i++){
+ cleanupCursor(&p->aCsr[i]);
+ }
+ sqliteFree(p->aCsr);
+ p->aCsr = 0;
+ p->nCursor = 0;
+}
+
+/*
** Clean up the VM after execution.
**
** This routine will automatically close any cursors, lists, and/or
@@ -686,12 +699,7 @@ static void Cleanup(Vdbe *p){
PopStack(p, p->tos+1);
sqliteFree(p->azColName);
p->azColName = 0;
- for(i=0; i<p->nCursor; i++){
- cleanupCursor(&p->aCsr[i]);
- }
- sqliteFree(p->aCsr);
- p->aCsr = 0;
- p->nCursor = 0;
+ closeAllCursors(p);
for(i=0; i<p->nMem; i++){
if( p->aMem[i].s.flags & STK_Dyn ){
sqliteFree(p->aMem[i].z);
@@ -777,30 +785,30 @@ void sqliteVdbeDelete(Vdbe *p){
static char *zOpName[] = { 0,
"Transaction", "Commit", "Rollback", "ReadCookie",
"SetCookie", "VerifyCookie", "Open", "OpenTemp",
- "Close", "MoveTo", "Fcnt", "NewRecno",
- "Put", "Distinct", "Found", "NotFound",
- "Delete", "Column", "KeyAsData", "Recno",
- "FullKey", "Rewind", "Next", "Destroy",
- "Clear", "CreateIndex", "CreateTable", "Reorganize",
- "BeginIdx", "NextIdx", "PutIdx", "DeleteIdx",
- "MemLoad", "MemStore", "ListOpen", "ListWrite",
- "ListRewind", "ListRead", "ListClose", "SortOpen",
- "SortPut", "SortMakeRec", "SortMakeKey", "Sort",
- "SortNext", "SortKey", "SortCallback", "SortClose",
- "FileOpen", "FileRead", "FileColumn", "FileClose",
- "AggReset", "AggFocus", "AggIncr", "AggNext",
- "AggSet", "AggGet", "SetInsert", "SetFound",
- "SetNotFound", "SetClear", "MakeRecord", "MakeKey",
- "MakeIdxKey", "Goto", "If", "Halt",
- "ColumnCount", "ColumnName", "Callback", "Integer",
- "String", "Null", "Pop", "Dup",
- "Pull", "Add", "AddImm", "Subtract",
- "Multiply", "Divide", "Min", "Max",
- "Like", "Glob", "Eq", "Ne",
- "Lt", "Le", "Gt", "Ge",
- "IsNull", "NotNull", "Negative", "And",
- "Or", "Not", "Concat", "Noop",
- "Strlen", "Substr",
+ "OpenWrite", "Close", "MoveTo", "Fcnt",
+ "NewRecno", "Put", "Distinct", "Found",
+ "NotFound", "Delete", "Column", "KeyAsData",
+ "Recno", "FullKey", "Rewind", "Next",
+ "Destroy", "Clear", "CreateIndex", "CreateTable",
+ "Reorganize", "BeginIdx", "NextIdx", "PutIdx",
+ "DeleteIdx", "MemLoad", "MemStore", "ListOpen",
+ "ListWrite", "ListRewind", "ListRead", "ListClose",
+ "SortOpen", "SortPut", "SortMakeRec", "SortMakeKey",
+ "Sort", "SortNext", "SortKey", "SortCallback",
+ "SortClose", "FileOpen", "FileRead", "FileColumn",
+ "FileClose", "AggReset", "AggFocus", "AggIncr",
+ "AggNext", "AggSet", "AggGet", "SetInsert",
+ "SetFound", "SetNotFound", "SetClear", "MakeRecord",
+ "MakeKey", "MakeIdxKey", "Goto", "If",
+ "Halt", "ColumnCount", "ColumnName", "Callback",
+ "Integer", "String", "Null", "Pop",
+ "Dup", "Pull", "Add", "AddImm",
+ "Subtract", "Multiply", "Divide", "Min",
+ "Max", "Like", "Glob", "Eq",
+ "Ne", "Lt", "Le", "Gt",
+ "Ge", "IsNull", "NotNull", "Negative",
+ "And", "Or", "Not", "Concat",
+ "Noop", "Strlen", "Substr",
};
/*
@@ -1985,7 +1993,7 @@ case OP_VerifyCookie: {
/* Opcode: Open P1 P2 P3
**
-** Open a new cursor for the database table whose root page is
+** Open a read-only cursor for the database table whose root page is
** P2 in the main database file. Give the new cursor an identifier
** of P1. The P1 values need not be contiguous but all P1 values
** should be small integers. It is an error for P1 to be negative.
@@ -2006,6 +2014,16 @@ case OP_VerifyCookie: {
** omitted. But the code generator usually inserts the index or
** table name into P3 to make the code easier to read.
*/
+/* Opcode: OpenWrite P1 P2 P3
+**
+** Open a read/write cursor named P1 on the table or index whose root
+** page is P2. If P2==0 then take the root page number from the stack.
+**
+** This instruction works just like Open except that it opens the cursor
+** in read/write mode. For a given table, there can be one or more read-only
+** cursors or a single read/write cursor but not both.
+*/
+case OP_OpenWrite:
case OP_Open: {
int busy = 0;
int i = pOp->p1;
@@ -2035,7 +2053,8 @@ case OP_Open: {
cleanupCursor(&p->aCsr[i]);
memset(&p->aCsr[i], 0, sizeof(Cursor));
do{
- rc = sqliteBtreeCursor(pBt, p2, &p->aCsr[i].pCursor);
+ int wrFlag = pOp->opcode==OP_OpenWrite;
+ rc = sqliteBtreeCursor(pBt, p2, wrFlag, &p->aCsr[i].pCursor);
switch( rc ){
case SQLITE_BUSY: {
if( xBusy==0 || (*xBusy)(pBusyArg, pOp->p3, ++busy)==0 ){
@@ -2081,7 +2100,7 @@ case OP_OpenTemp: {
memset(pCx, 0, sizeof(*pCx));
rc = sqliteBtreeOpen(0, 0, TEMP_PAGES, &pCx->pBt);
if( rc==SQLITE_OK ){
- rc = sqliteBtreeCursor(pCx->pBt, 2, &pCx->pCursor);
+ rc = sqliteBtreeCursor(pCx->pBt, 2, 1, &pCx->pCursor);
}
if( rc==SQLITE_OK ){
rc = sqliteBtreeBeginTrans(pCx->pBt);
@@ -2637,7 +2656,7 @@ case OP_PutIdx: {
BtCursor *pCrsr;
VERIFY( if( tos<0 ) goto not_enough_stack; )
if( VERIFY( i>=0 && i<p->nCursor && ) (pCrsr = p->aCsr[i].pCursor)!=0 ){
- sqliteBtreeInsert(pCrsr, zStack[tos], aStack[tos].n, "", 0);
+ rc = sqliteBtreeInsert(pCrsr, zStack[tos], aStack[tos].n, "", 0);
}
POPSTACK;
break;
@@ -2657,7 +2676,7 @@ case OP_DeleteIdx: {
int rx, res;
rx = sqliteBtreeMoveto(pCrsr, zStack[tos], aStack[tos].n, &res);
if( rx==SQLITE_OK && res==0 ){
- sqliteBtreeDelete(pCrsr);
+ rc = sqliteBtreeDelete(pCrsr);
}
}
POPSTACK;
@@ -3784,7 +3803,8 @@ cleanup:
rc = SQLITE_INTERNAL;
sqliteSetString(pzErrMsg, "table or index root page not set", 0);
}
- if( rc!=SQLITE_OK && (db->flags & SQLITE_InTrans)!=0 ){
+ if( rc!=SQLITE_OK ){
+ closeAllCursors(p);
sqliteBtreeRollback(pBt);
sqliteRollbackInternalChanges(db);
db->flags &= ~SQLITE_InTrans;
diff --git a/src/vdbe.h b/src/vdbe.h
index b5634982a..c1975bd17 100644
--- a/src/vdbe.h
+++ b/src/vdbe.h
@@ -15,7 +15,7 @@
** or VDBE. The VDBE implements an abstract machine that runs a
** simple program to access and modify the underlying database.
**
-** $Id: vdbe.h,v 1.23 2001/09/16 00:13:27 drh Exp $
+** $Id: vdbe.h,v 1.24 2001/09/23 02:35:53 drh Exp $
*/
#ifndef _SQLITE_VDBE_H_
#define _SQLITE_VDBE_H_
@@ -69,116 +69,117 @@ typedef struct VdbeOp VdbeOp;
#define OP_Open 7
#define OP_OpenTemp 8
-#define OP_Close 9
-#define OP_MoveTo 10
-#define OP_Fcnt 11
-#define OP_NewRecno 12
-#define OP_Put 13
-#define OP_Distinct 14
-#define OP_Found 15
-#define OP_NotFound 16
-#define OP_Delete 17
-#define OP_Column 18
-#define OP_KeyAsData 19
-#define OP_Recno 20
-#define OP_FullKey 21
-#define OP_Rewind 22
-#define OP_Next 23
-
-#define OP_Destroy 24
-#define OP_Clear 25
-#define OP_CreateIndex 26
-#define OP_CreateTable 27
-#define OP_Reorganize 28
-
-#define OP_BeginIdx 29
-#define OP_NextIdx 30
-#define OP_PutIdx 31
-#define OP_DeleteIdx 32
-
-#define OP_MemLoad 33
-#define OP_MemStore 34
-
-#define OP_ListOpen 35
-#define OP_ListWrite 36
-#define OP_ListRewind 37
-#define OP_ListRead 38
-#define OP_ListClose 39
-
-#define OP_SortOpen 40
-#define OP_SortPut 41
-#define OP_SortMakeRec 42
-#define OP_SortMakeKey 43
-#define OP_Sort 44
-#define OP_SortNext 45
-#define OP_SortKey 46
-#define OP_SortCallback 47
-#define OP_SortClose 48
-
-#define OP_FileOpen 49
-#define OP_FileRead 50
-#define OP_FileColumn 51
-#define OP_FileClose 52
-
-#define OP_AggReset 53
-#define OP_AggFocus 54
-#define OP_AggIncr 55
-#define OP_AggNext 56
-#define OP_AggSet 57
-#define OP_AggGet 58
-
-#define OP_SetInsert 59
-#define OP_SetFound 60
-#define OP_SetNotFound 61
-#define OP_SetClear 62
-
-#define OP_MakeRecord 63
-#define OP_MakeKey 64
-#define OP_MakeIdxKey 65
-
-#define OP_Goto 66
-#define OP_If 67
-#define OP_Halt 68
-
-#define OP_ColumnCount 69
-#define OP_ColumnName 70
-#define OP_Callback 71
-
-#define OP_Integer 72
-#define OP_String 73
-#define OP_Null 74
-#define OP_Pop 75
-#define OP_Dup 76
-#define OP_Pull 77
-
-#define OP_Add 78
-#define OP_AddImm 79
-#define OP_Subtract 80
-#define OP_Multiply 81
-#define OP_Divide 82
-#define OP_Min 83
-#define OP_Max 84
-#define OP_Like 85
-#define OP_Glob 86
-#define OP_Eq 87
-#define OP_Ne 88
-#define OP_Lt 89
-#define OP_Le 90
-#define OP_Gt 91
-#define OP_Ge 92
-#define OP_IsNull 93
-#define OP_NotNull 94
-#define OP_Negative 95
-#define OP_And 96
-#define OP_Or 97
-#define OP_Not 98
-#define OP_Concat 99
-#define OP_Noop 100
-
-#define OP_Strlen 101
-#define OP_Substr 102
-
-#define OP_MAX 102
+#define OP_OpenWrite 9
+#define OP_Close 10
+#define OP_MoveTo 11
+#define OP_Fcnt 12
+#define OP_NewRecno 13
+#define OP_Put 14
+#define OP_Distinct 15
+#define OP_Found 16
+#define OP_NotFound 17
+#define OP_Delete 18
+#define OP_Column 19
+#define OP_KeyAsData 20
+#define OP_Recno 21
+#define OP_FullKey 22
+#define OP_Rewind 23
+#define OP_Next 24
+
+#define OP_Destroy 25
+#define OP_Clear 26
+#define OP_CreateIndex 27
+#define OP_CreateTable 28
+#define OP_Reorganize 29
+
+#define OP_BeginIdx 30
+#define OP_NextIdx 31
+#define OP_PutIdx 32
+#define OP_DeleteIdx 33
+
+#define OP_MemLoad 34
+#define OP_MemStore 35
+
+#define OP_ListOpen 36
+#define OP_ListWrite 37
+#define OP_ListRewind 38
+#define OP_ListRead 39
+#define OP_ListClose 40
+
+#define OP_SortOpen 41
+#define OP_SortPut 42
+#define OP_SortMakeRec 43
+#define OP_SortMakeKey 44
+#define OP_Sort 45
+#define OP_SortNext 46
+#define OP_SortKey 47
+#define OP_SortCallback 48
+#define OP_SortClose 49
+
+#define OP_FileOpen 50
+#define OP_FileRead 51
+#define OP_FileColumn 52
+#define OP_FileClose 53
+
+#define OP_AggReset 54
+#define OP_AggFocus 55
+#define OP_AggIncr 56
+#define OP_AggNext 57
+#define OP_AggSet 58
+#define OP_AggGet 59
+
+#define OP_SetInsert 60
+#define OP_SetFound 61
+#define OP_SetNotFound 62
+#define OP_SetClear 63
+
+#define OP_MakeRecord 64
+#define OP_MakeKey 65
+#define OP_MakeIdxKey 66
+
+#define OP_Goto 67
+#define OP_If 68
+#define OP_Halt 69
+
+#define OP_ColumnCount 70
+#define OP_ColumnName 71
+#define OP_Callback 72
+
+#define OP_Integer 73
+#define OP_String 74
+#define OP_Null 75
+#define OP_Pop 76
+#define OP_Dup 77
+#define OP_Pull 78
+
+#define OP_Add 79
+#define OP_AddImm 80
+#define OP_Subtract 81
+#define OP_Multiply 82
+#define OP_Divide 83
+#define OP_Min 84
+#define OP_Max 85
+#define OP_Like 86
+#define OP_Glob 87
+#define OP_Eq 88
+#define OP_Ne 89
+#define OP_Lt 90
+#define OP_Le 91
+#define OP_Gt 92
+#define OP_Ge 93
+#define OP_IsNull 94
+#define OP_NotNull 95
+#define OP_Negative 96
+#define OP_And 97
+#define OP_Or 98
+#define OP_Not 99
+#define OP_Concat 100
+#define OP_Noop 101
+
+#define OP_Strlen 102
+#define OP_Substr 103
+
+#define OP_MAX 103
/*
** Prototypes for the VDBE interface. See comments on the implementation
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-19 11:03:22 +0000