diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/btree.c | 181 | ||||
-rw-r--r-- | src/sqliteInt.h | 9 |
2 files changed, 146 insertions, 44 deletions
diff --git a/src/btree.c b/src/btree.c index 2f3063c3a..0a3d71317 100644 --- a/src/btree.c +++ b/src/btree.c @@ -1746,7 +1746,7 @@ static u8 *pageFindSlot(MemPage *pPg, int nByte, int *pRc){ ** allocation is being made in order to insert a new cell, so we will ** also end up needing a new cell pointer. */ -static int allocateSpace(MemPage *pPage, int nByte, int *pIdx){ +static SQLITE_INLINE int allocateSpace(MemPage *pPage, int nByte, int *pIdx){ const int hdr = pPage->hdrOffset; /* Local cache of pPage->hdrOffset */ u8 * const data = pPage->aData; /* Local cache of pPage->aData */ int top; /* First byte of cell content area */ @@ -1862,7 +1862,7 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ assert( CORRUPT_DB || iEnd <= pPage->pBt->usableSize ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); assert( iSize>=4 ); /* Minimum cell size is 4 */ - assert( iStart<=pPage->pBt->usableSize-4 ); + assert( CORRUPT_DB || iStart<=pPage->pBt->usableSize-4 ); /* The list of freeblocks must be in ascending order. Find the ** spot on the list where iStart should be inserted. @@ -1919,6 +1919,11 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ } pTmp = &data[hdr+5]; x = get2byte(pTmp); + if( pPage->pBt->btsFlags & BTS_FAST_SECURE ){ + /* Overwrite deleted information with zeros when the secure_delete + ** option is enabled */ + memset(&data[iStart], 0, iSize); + } if( iStart<=x ){ /* The new freeblock is at the beginning of the cell content area, ** so just extend the cell content area rather than create another @@ -1930,14 +1935,9 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ }else{ /* Insert the new freeblock into the freelist */ put2byte(&data[iPtr], iStart); + put2byte(&data[iStart], iFreeBlk); + put2byte(&data[iStart+2], iSize); } - if( pPage->pBt->btsFlags & BTS_FAST_SECURE ){ - /* Overwrite deleted information with zeros when the secure_delete - ** option is enabled */ - memset(&data[iStart], 0, iSize); - } - put2byte(&data[iStart], iFreeBlk); - put2byte(&data[iStart+2], iSize); pPage->nFree += iOrigSize; return SQLITE_OK; } @@ -7096,6 +7096,14 @@ static void dropCell(MemPage *pPage, int idx, int sz, int *pRC){ ** in pTemp or the original pCell) and also record its index. ** Allocating a new entry in pPage->aCell[] implies that ** pPage->nOverflow is incremented. +** +** The insertCellFast() routine below works exactly the same as +** insertCell() except that it lacks the pTemp and iChild parameters +** which are assumed zero. Other than that, the two routines are the +** same. +** +** Fixes or enhancements to this routine should be reflected in +** insertCellFast()! */ static int insertCell( MemPage *pPage, /* Page into which we are copying */ @@ -7118,14 +7126,103 @@ static int insertCell( assert( sqlite3_mutex_held(pPage->pBt->mutex) ); assert( sz==pPage->xCellSize(pPage, pCell) || CORRUPT_DB ); assert( pPage->nFree>=0 ); + assert( iChild>0 ); if( pPage->nOverflow || sz+2>pPage->nFree ){ if( pTemp ){ memcpy(pTemp, pCell, sz); pCell = pTemp; } - if( iChild ){ - put4byte(pCell, iChild); + put4byte(pCell, iChild); + j = pPage->nOverflow++; + /* Comparison against ArraySize-1 since we hold back one extra slot + ** as a contingency. In other words, never need more than 3 overflow + ** slots but 4 are allocated, just to be safe. */ + assert( j < ArraySize(pPage->apOvfl)-1 ); + pPage->apOvfl[j] = pCell; + pPage->aiOvfl[j] = (u16)i; + + /* When multiple overflows occur, they are always sequential and in + ** sorted order. This invariants arise because multiple overflows can + ** only occur when inserting divider cells into the parent page during + ** balancing, and the dividers are adjacent and sorted. + */ + assert( j==0 || pPage->aiOvfl[j-1]<(u16)i ); /* Overflows in sorted order */ + assert( j==0 || i==pPage->aiOvfl[j-1]+1 ); /* Overflows are sequential */ + }else{ + int rc = sqlite3PagerWrite(pPage->pDbPage); + if( NEVER(rc!=SQLITE_OK) ){ + return rc; } + assert( sqlite3PagerIswriteable(pPage->pDbPage) ); + data = pPage->aData; + assert( &data[pPage->cellOffset]==pPage->aCellIdx ); + rc = allocateSpace(pPage, sz, &idx); + if( rc ){ return rc; } + /* The allocateSpace() routine guarantees the following properties + ** if it returns successfully */ + assert( idx >= 0 ); + assert( idx >= pPage->cellOffset+2*pPage->nCell+2 || CORRUPT_DB ); + assert( idx+sz <= (int)pPage->pBt->usableSize ); + pPage->nFree -= (u16)(2 + sz); + /* In a corrupt database where an entry in the cell index section of + ** a btree page has a value of 3 or less, the pCell value might point + ** as many as 4 bytes in front of the start of the aData buffer for + ** the source page. Make sure this does not cause problems by not + ** reading the first 4 bytes */ + memcpy(&data[idx+4], pCell+4, sz-4); + put4byte(&data[idx], iChild); + pIns = pPage->aCellIdx + i*2; + memmove(pIns+2, pIns, 2*(pPage->nCell - i)); + put2byte(pIns, idx); + pPage->nCell++; + /* increment the cell count */ + if( (++data[pPage->hdrOffset+4])==0 ) data[pPage->hdrOffset+3]++; + assert( get2byte(&data[pPage->hdrOffset+3])==pPage->nCell || CORRUPT_DB ); +#ifndef SQLITE_OMIT_AUTOVACUUM + if( pPage->pBt->autoVacuum ){ + int rc2 = SQLITE_OK; + /* The cell may contain a pointer to an overflow page. If so, write + ** the entry for the overflow page into the pointer map. + */ + ptrmapPutOvflPtr(pPage, pPage, pCell, &rc2); + if( rc2 ) return rc2; + } +#endif + } + return SQLITE_OK; +} + +/* +** This variant of insertCell() assumes that the pTemp and iChild +** parameters are both zero. Use this variant in sqlite3BtreeInsert() +** for performance improvement, and also so that this variant is only +** called from that one place, and is thus inlined, and thus runs must +** faster. +** +** Fixes or enhancements to this routine should be reflected into +** the insertCell() routine. +*/ +static int insertCellFast( + MemPage *pPage, /* Page into which we are copying */ + int i, /* New cell becomes the i-th cell of the page */ + u8 *pCell, /* Content of the new cell */ + int sz /* Bytes of content in pCell */ +){ + int idx = 0; /* Where to write new cell content in data[] */ + int j; /* Loop counter */ + u8 *data; /* The content of the whole page */ + u8 *pIns; /* The point in pPage->aCellIdx[] where no cell inserted */ + + assert( i>=0 && i<=pPage->nCell+pPage->nOverflow ); + assert( MX_CELL(pPage->pBt)<=10921 ); + assert( pPage->nCell<=MX_CELL(pPage->pBt) || CORRUPT_DB ); + assert( pPage->nOverflow<=ArraySize(pPage->apOvfl) ); + assert( ArraySize(pPage->apOvfl)==ArraySize(pPage->aiOvfl) ); + assert( sqlite3_mutex_held(pPage->pBt->mutex) ); + assert( sz==pPage->xCellSize(pPage, pCell) || CORRUPT_DB ); + assert( pPage->nFree>=0 ); + assert( pPage->nOverflow==0 ); + if( sz+2>pPage->nFree ){ j = pPage->nOverflow++; /* Comparison against ArraySize-1 since we hold back one extra slot ** as a contingency. In other words, never need more than 3 overflow @@ -7157,17 +7254,7 @@ static int insertCell( assert( idx >= pPage->cellOffset+2*pPage->nCell+2 || CORRUPT_DB ); assert( idx+sz <= (int)pPage->pBt->usableSize ); pPage->nFree -= (u16)(2 + sz); - if( iChild ){ - /* In a corrupt database where an entry in the cell index section of - ** a btree page has a value of 3 or less, the pCell value might point - ** as many as 4 bytes in front of the start of the aData buffer for - ** the source page. Make sure this does not cause problems by not - ** reading the first 4 bytes */ - memcpy(&data[idx+4], pCell+4, sz-4); - put4byte(&data[idx], iChild); - }else{ - memcpy(&data[idx], pCell, sz); - } + memcpy(&data[idx], pCell, sz); pIns = pPage->aCellIdx + i*2; memmove(pIns+2, pIns, 2*(pPage->nCell - i)); put2byte(pIns, idx); @@ -7496,42 +7583,50 @@ static int pageFreeArray( u8 * const pEnd = &aData[pPg->pBt->usableSize]; u8 * const pStart = &aData[pPg->hdrOffset + 8 + pPg->childPtrSize]; int nRet = 0; - int i; + int i, j; int iEnd = iFirst + nCell; - u8 *pFree = 0; /* \__ Parameters for pending call to */ - int szFree = 0; /* / freeSpace() */ + int nFree = 0; + int aOfst[10]; + int aAfter[10]; for(i=iFirst; i<iEnd; i++){ u8 *pCell = pCArray->apCell[i]; if( SQLITE_WITHIN(pCell, pStart, pEnd) ){ int sz; + int iAfter; + int iOfst; /* No need to use cachedCellSize() here. The sizes of all cells that ** are to be freed have already been computing while deciding which ** cells need freeing */ sz = pCArray->szCell[i]; assert( sz>0 ); - if( pFree!=(pCell + sz) ){ - if( pFree ){ - assert( pFree>aData && (pFree - aData)<65536 ); - freeSpace(pPg, (u16)(pFree - aData), szFree); + iOfst = (u16)(pCell - aData); + iAfter = iOfst+sz; + for(j=0; j<nFree; j++){ + if( aOfst[j]==iAfter ){ + aOfst[j] = iOfst; + break; + }else if( aAfter[j]==iOfst ){ + aAfter[j] = iAfter; + break; } - pFree = pCell; - szFree = sz; - if( pFree+sz>pEnd ){ - return 0; + } + if( j>=nFree ){ + if( nFree>=sizeof(aOfst)/sizeof(aOfst[0]) ){ + for(j=0; j<nFree; j++){ + freeSpace(pPg, aOfst[j], aAfter[j]-aOfst[j]); + } + nFree = 0; } - }else{ - /* The current cell is adjacent to and before the pFree cell. - ** Combine the two regions into one to reduce the number of calls - ** to freeSpace(). */ - pFree = pCell; - szFree += sz; + aOfst[nFree] = iOfst; + aAfter[nFree] = iAfter; + if( &aData[iAfter]>pEnd ) return 0; + nFree++; } nRet++; } } - if( pFree ){ - assert( pFree>aData && (pFree - aData)<65536 ); - freeSpace(pPg, (u16)(pFree - aData), szFree); + for(j=0; j<nFree; j++){ + freeSpace(pPg, aOfst[j], aAfter[j]-aOfst[j]); } return nRet; } @@ -9312,7 +9407,7 @@ int sqlite3BtreeInsert( }else{ assert( pPage->leaf ); } - rc = insertCell(pPage, idx, newCell, szNew, 0, 0); + rc = insertCellFast(pPage, idx, newCell, szNew); assert( pPage->nOverflow==0 || rc==SQLITE_OK ); assert( rc!=SQLITE_OK || pPage->nCell>0 || pPage->nOverflow>0 ); diff --git a/src/sqliteInt.h b/src/sqliteInt.h index 9b189124d..f33f6eb20 100644 --- a/src/sqliteInt.h +++ b/src/sqliteInt.h @@ -281,15 +281,22 @@ #endif /* -** A macro to hint to the compiler that a function should not be +** Macros to hint to the compiler that a function should or should not be ** inlined. */ #if defined(__GNUC__) # define SQLITE_NOINLINE __attribute__((noinline)) +# define SQLITE_INLINE __attribute__((always_inline)) inline #elif defined(_MSC_VER) && _MSC_VER>=1310 # define SQLITE_NOINLINE __declspec(noinline) +# define SQLITE_INLINE __forceinline #else # define SQLITE_NOINLINE +# define SQLITE_INLINE +#endif +#if defined(SQLITE_COVERAGE_TEST) +# undef SQLITE_INLINE +# define SQLITE_INLINE #endif /* |