| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Several places in NUM_numpart_from_char(), which is called from the SQL
function to_number(text, text), could accidentally read one byte past
the end of the input buffer (which comes from the input text datum and
is not null-terminated).
1. One leading space character would be skipped, but there was no check
that the input was at least one byte long. This does not happen in
practice, but for defensiveness, add a check anyway.
2. Commit 4a3a1e2cf apparently accidentally doubled that code that skips
one space character (so that two spaces might be skipped), but there
was no overflow check before skipping the second byte. Fix by
removing that duplicate code.
3. A logic error would allow a one-byte over-read when looking for a
trailing sign (S) placeholder.
In each case, the extra byte cannot be read out directly, but looking at
it might cause a crash.
The third item was discovered by Piotr Stefaniak, the first two were
found and analyzed by Tom Lane and Peter Eisentraut.
|
| |
|
|
|
| |
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: cda21c1d7b160b303dc21dfe9d4169f2c8064c60
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecEvalCase() tried to save a cycle or two by passing
&econtext->caseValue_isNull as the isNull argument to its sub-evaluation of
the CASE value expression. If that subexpression itself contained a CASE,
then *isNull was an alias for econtext->caseValue_isNull within the
recursive call of ExecEvalCase(), leading to confusion about whether the
inner call's caseValue was null or not. In the worst case this could lead
to a core dump due to dereferencing a null pointer. Fix by not assigning
to the global variable until control comes back from the subexpression.
Also, avoid using the passed-in isNull pointer transiently for evaluation
of WHEN expressions. (Either one of these changes would have been
sufficient to fix the known misbehavior, but it's clear now that each of
these choices was in itself dangerous coding practice and best avoided.
There do not seem to be any similar hazards elsewhere in execQual.c.)
Also, it was possible for inlining of a SQL function that implements the
equality operator used for a CASE comparison to result in one CASE
expression's CaseTestExpr node being inserted inside another CASE
expression. This would certainly result in wrong answers since the
improperly nested CaseTestExpr would be caused to return the inner CASE's
comparison value not the outer's. If the CASE values were of different
data types, a crash might result; moreover such situations could be abused
to allow disclosure of portions of server memory. To fix, teach
inline_function to check for "bare" CaseTestExpr nodes in the arguments of
a function to be inlined, and avoid inlining if there are any.
Heikki Linnakangas, Michael Paquier, Tom Lane
Report: https://github.com/greenplum-db/gpdb/pull/327
Report: <4DDCEEB8.50602@enterprisedb.com>
Security: CVE-2016-5423
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to simplistic quoting and confusion of database names with conninfo
strings, roles with the CREATEDB or CREATEROLE option could escalate to
superuser privileges when a superuser next ran certain maintenance
commands. The new coding rule for PQconnectdbParams() calls, documented
at conninfo_array_parse(), is to pass expand_dbname=true and wrap
literal database names in a trivial connection string. Escape
zero-length values in appendConnStrVal(). Back-patch to 9.1 (all
supported versions).
Nathan Bossart, Michael Paquier, and Noah Misch. Reviewed by Peter
Eisentraut. Reported by Nathan Bossart.
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
|
| |
Rename these newly-extern functions with terms more typical of their new
neighbors. No functional changes; a subsequent commit will use them in
more places. Back-patch to 9.1 (all supported versions). Back branches
lack src/fe_utils, so instead rename the functions in place; the
subsequent commit will copy them into the other programs using them.
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
| |
The incorrect quoting may have permitted arbitrary command execution.
At a minimum, it gave broader control over the command line to actors
supposed to have control over a single argument. Back-patch to 9.1 (all
supported versions).
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These characters prematurely terminate Windows shell command processing,
causing the shell to execute a prefix of the intended command. The
chief alternative to rejecting these characters was to bypass the
Windows shell with CreateProcess(), but the ability to use such names
has little value. Back-patch to 9.1 (all supported versions).
This change formally revokes support for these characters in database
names and roles names. Don't document this; the error message is
self-explanatory, and too few users would benefit. A future major
release may forbid creation of databases and roles so named. For now,
check only at known weak points in pg_dumpall. Future commits will,
without notice, reject affected names from other frontend programs.
Also extend the restriction to pg_dumpall --dbname=CONNSTR arguments and
--file arguments. Unlike the effects on role name arguments and
database names, this does not reflect a broad policy change. A
migration to CreateProcess() could lift these two restrictions.
Reviewed by Peter Eisentraut.
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
These programs nominally accepted conninfo strings, but they would
proceed to use the original dbname parameter as though it were an
unadorned database name. This caused "reindexdb dbname=foo" to issue an
SQL command that always failed, and other programs printed a conninfo
string in error messages that purported to print a database name. Fix
both problems by using PQdb() to retrieve actual database names.
Continue to print the full conninfo string when reporting a connection
failure. It is informative there, and if the database name is the sole
problem, the server-side error message will include the name. Beyond
those user-visible fixes, this allows a subsequent commit to synthesize
and use conninfo strings without that implementation detail leaking into
messages. As a side effect, the "vacuuming database" message now
appears after, not before, the connection attempt. Back-patch to 9.1
(all supported versions).
Reviewed by Michael Paquier and Peter Eisentraut.
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The decision to reuse values of parameters from a previous connection
has been based on whether the new target is a conninfo string. Add this
means of overriding that default. This feature arose as one component
of a fix for security vulnerabilities in pg_dump, pg_dumpall, and
pg_upgrade, so back-patch to 9.1 (all supported versions). In 9.3 and
later, comment paragraphs that required update had already-incorrect
claims about behavior when no connection is open; fix those problems.
Security: CVE-2016-5424
|
| |
|
|
|
|
|
|
|
|
|
|
| |
In arguments, these meta-commands wrongly treated each pair as closing
the double quoted string. Make the behavior match the documentation.
This is a compatibility break, but I more expect to find software with
untested reliance on the documented behavior than software reliant on
today's behavior. Back-patch to 9.1 (all supported versions).
Reviewed by Tom Lane and Peter Eisentraut.
Security: CVE-2016-5424
|
| |
|
|
| |
07d25a964 changed only one occurrence. Change the other one as well.
|
| |
|
|
|
|
|
|
|
|
| |
Although the standard has routines.result_cast_character_set_name, given
the naming of the surrounding columns, we concluded that this must have
been a mistake and that result_cast_char_set_name was intended, so
change the implementation. The documentation was already using the new
name.
found by Clément Prévost <prevostclement@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If ANALYZE found no repeated non-null entries in its sample, it set the
column's stadistinct value to -1.0, intending to indicate that the entries
are all distinct. But what this value actually means is that the number
of distinct values is 100% of the table's rowcount, and thus it was
overestimating the number of distinct values by however many nulls there
are. This could lead to very poor selectivity estimates, as for example
in a recent report from Andreas Joseph Krogh. We should discount the
stadistinct value by whatever we've estimated the nulls fraction to be.
(That is what will happen if we choose to use a negative stadistinct for
a column that does have repeated entries, so this code path was just
inconsistent.)
In addition to fixing the stadistinct entries stored by several different
ANALYZE code paths, adjust the logic where get_variable_numdistinct()
forces an "all distinct" estimate on the basis of finding a relevant unique
index. Unique indexes don't reject nulls, so there's no reason to assume
that the null fraction doesn't apply.
Back-patch to all supported branches. Back-patching is a bit of a judgment
call, but this problem seems to affect only a few users (else we'd have
identified it long ago), and it's bad enough when it does happen that
destabilizing plan choices in a worse direction seems unlikely.
Patch by me, with documentation wording suggested by Dean Rasheed
Report: <VisenaEmail.26.df42f82acae38a58.156463942b8@tc7-visena>
Discussion: <16143.1470350371@sss.pgh.pa.us>
|
| |
|
|
|
|
|
|
| |
Oversight in commit 976b24fb4.
Andreas Seltenreich
Report: <87y448l3ag.fsf@credativ.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Discussion of commit 3e2f3c2e4 exposed a problem that is of longer
standing: since we don't detoast data while sticking it into a portal's
holdStore for PORTAL_ONE_RETURNING and PORTAL_UTIL_SELECT queries, and we
release the query's snapshot as soon as we're done loading the holdStore,
later readout of the holdStore can do TOAST fetches against data that can
no longer be seen by any of the session's live snapshots. This means that
a concurrent VACUUM could remove the TOAST data before we can fetch it.
Commit 3e2f3c2e4 exposed the problem by showing that sometimes we had *no*
live snapshots while fetching TOAST data, but we'd be at risk anyway.
I believe this code was all right when written, because our management of a
session's exposed xmin was such that the TOAST references were safe until
end of transaction. But that's no longer true now that we can advance or
clear our PGXACT.xmin intra-transaction.
To fix, copy the query's snapshot during FillPortalStore() and save it in
the Portal; release it only when the portal is dropped. This essentially
implements a policy that we must hold a relevant snapshot whenever we
access potentially-toasted data. We had already come to that conclusion
in other places, cf commits 08e261cbc94ce9a7 and ec543db77b6b72f2.
I'd have liked to add a regression test case for this, but I didn't see
a way to make one that's not unreasonably bloated; it seems to require
returning a toasted value to the client, and those will be big.
In passing, improve PortalRunUtility() so that it positively verifies
that its ending PopActiveSnapshot() call will pop the expected snapshot,
removing a rather shaky assumption about which utility commands might
do their own PopActiveSnapshot(). There's no known bug here, but now
that we're actively referencing the snapshot it's almost free to make
this code a bit more bulletproof.
We might want to consider back-patching something like this into older
branches, but it would be prudent to let it prove itself more in HEAD
beforehand.
Discussion: <87vazemeda.fsf@credativ.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The sole caller expects NULL to be returned in such a case, so make
it so and document it.
Per reports from Andreas Seltenreich and Regina Obe. This doesn't
really fix their problem, as now their RETURNING queries will say
"ERROR: no known snapshots", but in any case this function should
not dump core in a reasonably-foreseeable situation.
Report: <87vazemeda.fsf@credativ.de>
Report: <20160807051854.1427.32414@wrigleys.postgresql.org>
|
| |
|
|
|
|
|
|
|
| |
This oversight could cause logical decoding to fail to decode an outer
transaction containing changes, if a subtransaction had an XID but no
actual changes. Per bug #14279 from Marko Tiikkaja. Patch by Marko
based on analysis by Andrew Gierth.
Discussion: <20160804191757.1430.39011@wrigleys.postgresql.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In _bt_unlink_halfdead_page(), we might fail to find an immediate left
sibling of the target page, perhaps because of corruption of the page
sibling links. The code intends to cope with this by just abandoning
the deletion attempt; but what actually happens is that it fails outright
due to releasing the same buffer lock twice. (And error recovery masks
a second problem, which is possible leakage of a pin on another page.)
Seems to have been introduced by careless refactoring in commit efada2b8e.
Since there are multiple cases to consider, let's make releasing the buffer
lock in the failure case the responsibility of _bt_unlink_halfdead_page()
not its caller.
Also, avoid fetching the leaf page's left-link again after we've dropped
lock on the page. This is probably harmless, but it's not exactly good
coding practice.
Per report from Kyotaro Horiguchi. Back-patch to 9.4 where the faulty code
was introduced.
Discussion: <20160803.173116.111915228.horiguchi.kyotaro@lab.ntt.co.jp>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Beginning with the next development cycle, PG servers will report two-part
not three-part version numbers. Fix libpq so that it will compute the
correct numeric representation of such server versions for reporting by
PQserverVersion(). It's desirable to get this into the field and
back-patched ASAP, so that older clients are more likely to understand the
new server version numbering by the time any such servers are in the wild.
(The results with an old client would probably not be catastrophic anyway
for a released server; for example "10.1" would be interpreted as 100100
which would be wrong in detail but would not likely cause an old client to
misbehave badly. But "10devel" or "10beta1" would result in sversion==0
which at best would result in disabling all use of modern features.)
Extracted from a patch by Peter Eisentraut; comments added by me
Patch: <802ec140-635d-ad86-5fdf-d3af0e260c22@2ndquadrant.com>
|
| |
|
|
| |
Report: <57A4E6DF.8070209@dunslane.net>
|
| |
|
|
|
|
|
| |
This is required for the result to be a legal tsvector value.
Noted while fooling with Andreas Seltenreich's ts_delete() crash.
Discussion: <87invhoj6e.fsf@credativ.de>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Such cases either failed an Assert, or produced a corrupt tsvector in
non-Assert builds, as reported by Andreas Seltenreich. The reason is
that tsvector_delete_by_indices() just assumed that its input array had
no duplicates. Fix by explicitly de-duping.
In passing, improve some comments, and fix a number of tests for null
values to use ERRCODE_NULL_VALUE_NOT_ALLOWED not
ERRCODE_INVALID_PARAMETER_VALUE.
Discussion: <87invhoj6e.fsf@credativ.de>
|
| |
|
|
|
| |
Messed up by recent commits --- this is annoying me while trying to fix
some bugs here.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DST law changes in Kemerovo and Novosibirsk. Historical corrections for
Azerbaijan, Belarus, and Morocco. Asia/Novokuznetsk and Asia/Novosibirsk
now use numeric time zone abbreviations instead of invented ones. Zones
for Antarctic bases and other locations that have been uninhabited for
portions of the time span known to the tzdata database now report "-00"
rather than "zzz" as the zone abbreviation for those time spans.
Also, I decided to remove some of the timezone/data/ files that we don't
use. At one time that subdirectory was a complete copy of what IANA
distributes in the tzdata tarballs, but that hasn't been true for a long
time. There seems no good reason to keep shipping those specific files
but not others; they're just bloating our tarballs.
|
| |
|
|
|
|
|
|
|
| |
tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As mentioned in its commit message, eca0f1db left open a race condition,
where a page could be marked all-visible, after the code checked
PageIsAllVisible() to pin the VM, but before the page is locked. Plug
that hole.
Reviewed-By: Robert Haas, Andres Freund
Author: Amit Kapila
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some conditions resulted in "return" directly out of a PG_TRY block,
which left the exception stack dangling, and to add insult to injury
failed to restore the state of set_latch_on_sigusr1.
This is a bug only in 9.5; in HEAD it was accidentally fixed by commit
db0f6cad4, which removed the surrounding PG_TRY block. However, I (tgl)
chose to apply the patch to HEAD as well, because the old coding was
gratuitously different from WaitForBackgroundWorkerStartup(), and there
would indeed have been no bug if it were done like that to start with.
Dmitry Ivanov
Discussion: <1637882.WfYN5gPf1A@abook>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we tested for MVCC snapshots to see whether they were too
old, but not TOAST snapshots, which can lead to complaints about missing
TOAST chunks if those chunks are subject to early pruning. Ideally,
the threshold lsn and timestamp for a TOAST snapshot would be that of
the corresponding MVCC snapshot, but since we have no way of deciding
which MVCC snapshot was used to fetch the TOAST pointer, use the oldest
active or registered snapshot instead.
Reported by Andres Freund, who also sketched out what the fix should
look like. Patch by me, reviewed by Amit Kapila.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't want postmaster child processes to contain a copy of the
postmaster's PostmasterContext. That would be a waste of memory at least,
and at worst a security issue, since there are copies of the semi-sensitive
pg_hba and pg_ident data in there. All other child process types delete
the PostmasterContext after forking, but the original coding of the
background worker patch (commit da07a1e85) did not do so. It appears
that the only reason for that was to avoid copying the bgworker's
MyBgworkerEntry out of that context; but the couple of additional
statements needed to do so are hardly good justification for it. Hence,
copy that data and then clear the context as other child processes do.
Because this patch changes the memory context in which a bgworker function
gains control, back-patching it would be a bit risky, so we won't fix this
in back branches. The "security" complaint is pretty thin anyway for
generic bgworkers; only with the introduction of parallel query is there
any question of running untrusted code in a bgworker process.
Discussion: <14111.1470082717@sss.pgh.pa.us>
|
| |
|
|
| |
From: Clément Prévost <prevostclement@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In test 001_stream_rep we're using pg_stat_replication.write_location to
determine catch-up status, but we care about xlog having been applied
not just received, so change that to apply_location.
In test 003_recovery_targets, we query the database for a recovery
target specification and later for the xlog position supposedly
corresponding to that recovery specification. If for whatever reason
more WAL is written between the two queries, the recovery specification
is earlier than the xlog position used by the query in the test harness,
so we wait forever, leading to test failures. Deal with this by using a
single query to extract both items. In 2a0f89cd717 we tried to deal
with it by giving them more tests to run, but in hindsight that was
obviously doomed to failure (no revert of that, though).
Per hamster buildfarm failures.
Author: Michaël Paquier
|
| |
|
|
| |
Author: Amit Langote
|
| |
|
|
| |
Dmitry Igrishin
|
| |
|
|
|
|
|
|
|
|
|
| |
This is apparently harmless on Windows, but on Unix it results in an
assertion failure. We'd not noticed because this code doesn't get
used on Unix unless you build with -DEXEC_BACKEND. Bug was evidently
introduced by sloppy refactoring in commit 31c453165.
Thomas Munro
Discussion: <CAEepm=1VOnbVx4wsgQFvj94hu9jVt2nVabCr7QiooUSvPJXkgQ@mail.gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As noted by Alvaro, there are CHECK_FOR_INTERRUPTS() calls in the shm_mq.c
functions called by HandleParallelMessages(). I believe they're all
unreachable since we always pass nowait = true, but it doesn't seem like
a great idea to assume that no such call will ever be reachable from
HandleParallelMessages(). If that did happen, there would be a risk of a
recursive call to HandleParallelMessages(), which it does not appear to be
designed for --- for example, there's nothing that would prevent
out-of-order processing of received messages. And certainly such cases
cannot easily be tested. So let's prevent it by holding off interrupts for
the duration of the function. Back-patch to 9.5 which contains identical
code.
Discussion: <14869.1470083848@sss.pgh.pa.us>
|
| |
|
|
|
| |
Setting it to 0 is probably not useful in practice, but it allows
testing of situations without available background worker slots.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The document specifies that pg_replication_origin_xact_reset function
doesn't have any argument variables. But previously it was actually
defined so as to have two argument variables, though they were not
used at all. That is, the pg_proc entry for that function was incorrect.
This patch fixes the pg_proc entry and removes those two arguments
from the function definition.
No back-patch because this change needs a catalog version bump
although the issue exists in 9.5 as well. Instead, a note about those
unused argument variables will be added to 9.5 document later.
Catalog version bumped due to the change of pg_proc.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When doing record typmod remapping, tqueue.c did fresh catalog lookups
for each tuple it processed, which was pretty horrible performance-wise
(it seemed to about halve the already none-too-quick speed of bulk reads
in parallel mode). Worse, it insisted on putting bits of that data into
TopMemoryContext, from where it never freed them, causing a
session-lifespan memory leak. (I suppose this was coded with the idea
that the sender process would quit after finishing the query ---
but the receiver uses the same code.)
Restructure to avoid repetitive catalog lookups and to keep that data
in a query-lifespan context, in or below the context where the
TQueueDestReceiver or TupleQueueReader itself lives.
Fix some other bugs such as continuing to use a tupledesc after
releasing our refcount on it. Clean up cavalier datatype choices
(typmods are int32, please, not int, and certainly not Oid). Improve
comments and error message wording.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TupleQueueReaderNext() leaks like a sieve if it has to do any tuple
disassembly/reconstruction. While we could try to clean up its allocations
piecemeal, it seems like a better idea just to insist that it should be run
in a short-lived memory context, so that any transient space goes away
automatically. I chose to have nodeGather.c switch into its existing
per-tuple context before the call, rather than inventing a separate
context inside tqueue.c.
This is sufficient to stop all leakage in the simple case I exhibited
earlier today (see link below), but it does not deal with leaks induced
in more complex cases by tqueue.c's insistence on using TopMemoryContext
for data that it's not actually trying hard to keep track of. That issue
is intertwined with another major source of inefficiency, namely failure
to cache lookup results across calls, so it seems best to deal with it
separately.
In passing, improve some comments, and modify gather_readnext's method for
deciding when it's visited all the readers so that it's more obviously
correct. (I'm not actually convinced that the previous code *is*
correct in the case of a reader deletion; it certainly seems fragile.)
Discussion: <32763.1469821037@sss.pgh.pa.us>
|
| |
|
|
| |
It's depressingly clear that nobody ever tested this.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
An evident copy-and-pasteo in commit 2bd9e412f broke the non-blocking
aspect of pq_putmessage_noblock(), causing it to behave identically to
pq_putmessage(). That function is nowadays used only in walsender.c,
so that the net effect was to cause walsenders to hang up waiting for
the receiver in situations where they should not.
Kyotaro Horiguchi
Patch: <20160728.185228.58375982.horiguchi.kyotaro@lab.ntt.co.jp>
|
