| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change range_before, range_after, range_adjacent to return false rather
than throwing an error when one or both input ranges are empty.
The original definition is unnecessarily difficult to use, and also can
result in undesirable planner failures since the planner could try to
compare an empty range to something else while deriving statistical
estimates. (This was, in fact, the cause of repeatable regression test
failures on buildfarm member jaguar, as well as intermittent failures
elsewhere.)
Also tweak rangetypes regression test to not drop all the objects it
creates, so that the final state of the regression database contains
some rangetype objects for pg_dump testing.
|
| |
|
|
|
|
|
| |
No functional changes in this commit (except I could not resist the
temptation to re-word a couple of error messages). This is just manual
cleanup after pgindent to make the code look reasonably like other PG
code, in preparation for more detailed code review to come.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
a new macro, DatumGetInetPP(), that does not. This brings these macros
in line with other DatumGet*P() macros.
Backpatch to 8.3, where 1-byte header varlenas were introduced.
|
| | |
|
| |
|
|
|
|
|
| |
Selectivity estimation functions are missing for some range type operators,
which is a TODO.
Jeff Davis
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The POSIX spec defines locale fields for controlling the ordering of the
value, sign, and currency symbol in monetary output, but cash_out only
supported a small subset of these options. Fully implement p/n_sign_posn,
p/n_cs_precedes, and p/n_sep_by_space per spec. Fix up cash_in so that
it will accept all these format variants.
Also, make sure that thousands_sep is only inserted to the left of the
decimal point, as required by spec.
Per bug #6144 from Eduard Kracmar and discussion of bug #6277. This patch
includes some ideas from Alexander Lakhin's proposed patch, though it is
very different in detail.
|
| |
|
|
|
|
|
|
|
| |
Make sure that it considers all the possibilities that the old code did,
instead of trying only one possibility per character position. To keep the
runtime in bounds, instead tweak the character incrementers to not try
every possible multibyte character code. Remove unnecessary logic to
restore the old character value on failure. Additional comment and
formatting cleanup.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
cash_out failed to handle multiple-byte thousands separators, as per bug
#6277 from Alexander Law. In addition, cash_in didn't handle that either,
nor could it handle multiple-byte positive_sign. Both routines failed to
support multiple-byte mon_decimal_point, which I did not think was worth
changing, but at least now they check for the possibility and fall back to
using '.' rather than emitting invalid output. Also, make cash_in handle
trailing negative signs, which formerly it would reject. Since cash_out
generates trailing negative signs whenever the locale tells it to, this
last omission represents a fail-to-reload-dumped-data bug. IMO that
justifies patching this all the way back.
|
| |
|
|
|
|
|
|
|
| |
This infrastructure doesn't in any way guarantee that the character
we produce will sort before the one we incremented; but it does at least
make it much more likely that we'll end up with something that is a valid
character, which improves our chances.
Kyotaro Horiguchi, with various adjustments by me.
|
| |
|
|
|
|
|
|
|
|
|
| |
The uniqueness condition might fail to hold intra-transaction, and assuming
it does can give incorrect query results. Per report from Marti Raudsepp,
though this is not his proposed patch.
Back-patch to 9.0, where both these features were introduced. In the
released branches, add the new IndexOptInfo field to the end of the struct,
to try to minimize ABI breakage for third-party code that may be examining
that struct.
|
| |
|
|
|
|
|
| |
Avoid possibly dumping core when pgstat_track_activity_query_size has a
less-than-default value; avoid uselessly searching for the query string
of a successfully-exited backend; don't bother putting out an ERRDETAIL if
we don't have a query to show; some other minor stylistic improvements.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To avoid minimize risk inside the postmaster, we subject this feature
to a number of significant limitations. We very much wish to avoid
doing any complex processing inside the postmaster, due to the
posssibility that the crashed backend has completely corrupted shared
memory. To that end, no encoding conversion is done; instead, we just
replace anything that doesn't look like an ASCII character with a
question mark. We limit the amount of data copied to 1024 characters,
and carefully sanity check the source of that data. While these
restrictions would doubtless be unacceptable in a general-purpose
logging facility, even this limited facility seems like an improvement
over the status quo ante.
Marti Raudsepp, reviewed by PDXPUG and myself
|
| |
|
|
|
| |
This allows "indexedcol op ANY(ARRAY[...])" conditions to be used in plain
indexscans, and particularly in index-only scans.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit changes index-only scans so that data is read directly from the
index tuple without first generating a faux heap tuple. The only immediate
benefit is that indexes on system columns (such as OID) can be used in
index-only scans, but this is necessary infrastructure if we are ever to
support index-only scans on expression indexes. The executor is now ready
for that, though the planner still needs substantial work to recognize
the possibility.
To do this, Vars in index-only plan nodes have to refer to index columns
not heap columns. I introduced a new special varno, INDEX_VAR, to mark
such Vars to avoid confusion. (In passing, this commit renames the two
existing special varnos to OUTER_VAR and INNER_VAR.) This allows
ruleutils.c to handle them with logic similar to what we use for subplan
reference Vars.
Since index-only scans are now fundamentally different from regular
indexscans so far as their expression subtrees are concerned, I also chose
to change them to have their own plan node type (and hence, their own
executor source file).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
CREATE EXTENSION needs to transiently set search_path, as well as
client_min_messages and log_min_messages. We were doing this by the
expedient of saving the current string value of each variable, doing a
SET LOCAL, and then doing another SET LOCAL with the previous value at
the end of the command. This is a bit expensive though, and it also fails
badly if there is anything funny about the existing search_path value,
as seen in a recent report from Roger Niederland. Fortunately, there's a
much better way, which is to piggyback on the GUC infrastructure previously
developed for functions with SET options. We just open a new GUC nesting
level, do our assignments with GUC_ACTION_SAVE, and then close the nesting
level when done. This automatically restores the prior settings without a
re-parsing pass, so (in principle anyway) there can't be an error. And
guc.c still takes care of cleanup in event of an error abort.
The CREATE EXTENSION code for this was modeled on some much older code in
ri_triggers.c, which I also changed to use the better method, even though
there wasn't really much risk of failure there. Also improve the comments
in guc.c to reflect this additional usage.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Arrange for any problems with pre-existing settings to be reported as
WARNING not ERROR, so that we don't undesirably abort the loading of the
incoming add-on module. The bad setting is just discarded, as though it
had never been applied at all. (This requires a change in the API of
set_config_option. After some thought I decided the most potentially
useful addition was to allow callers to just pass in a desired elevel.)
Arrange to restore the complete stacked state of the variable, rather than
cheesily reinstalling only the active value. This ensures that custom GUCs
will behave unsurprisingly even when the module loading operation occurs
within nested subtransactions that have changed the active value. Since a
module load could occur as a result of, eg, a PL function call, this is not
an unlikely scenario.
|
| |
|
|
|
|
|
|
| |
This code was looking at the sub-Query tree as seen in the parent query's
RangeTblEntry; but that's the pristine parser output, and what we need to
look at is the tree as it stands at the completion of planning. Otherwise
we might pick up a Var that references a subquery that got flattened and
hence has no RelOptInfo in the subroot. Per report from Peter Geoghegan.
|
| |
|
|
| |
Forgot to consider this case ...
|
| |
|
|
|
|
|
|
|
|
| |
The standardized errno code for "no such locale" failures is ENOENT, which
we were just reporting at face value, viz "No such file or directory".
Per gripe from Thom Brown, this might confuse users, so add an errdetail
message to clarify what it means. Also, report newlocale() failures as
ERRCODE_INVALID_PARAMETER_VALUE rather than using
errcode_for_file_access(), since newlocale()'s errno values aren't
necessarily tied directly to file access failures.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
|
| |
|
|
|
|
| |
This addresses only those cases that are easy to fix by adding or
moving a const qualifier or removing an unnecessary cast. There are
many more complicated cases remaining.
|
| |
|
|
|
|
|
|
|
|
|
| |
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
|
| |
|
|
|
|
|
|
| |
Trailing-zero stripping applied by the FM specifier could strip zeroes
to the left of the decimal point, for a format with no digit positions
after the decimal point (such as "FM999.").
Reported and diagnosed by Marti Raudsepp, though I didn't use his patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With 9.1's use of Params to pass down values from NestLoop join nodes
to their inner plans, it is possible for a Param to have type RECORD, in
which case the set of fields comprising the value isn't determinable by
inspection of the Param alone. However, just as with a Var of type RECORD,
we can find out what we need to know if we can locate the expression that
the Param represents. We already knew how to do this in get_parameter(),
but I'd overlooked the need to be able to cope in get_name_for_var_field(),
which led to EXPLAIN failing with "record type has not been registered".
To fix, refactor the search code in get_parameter() so it can be used by
both functions.
Per report from Marti Raudsepp.
|
| |
|
|
|
| |
they wrap toward year 2020, rather than the inconsistent behavior we had
before.
|
| |
|
|
|
|
| |
Formerly, callers tested for DEFAULT_NUM_DISTINCT, which had the problem
that a perfectly solid estimate might be mistaken for a content-free
default.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a sub-select's output column is a simple Var, recursively look for
statistics applying to that Var, and use them if available. The need for
this was foreseen ages ago, but we didn't have enough infrastructure to do
it with reasonable speed until just now.
We punt and stick with default estimates if the subquery uses set
operations, GROUP BY, or DISTINCT, since those operations would change the
underlying column statistics (particularly, the relative frequencies of
different values) beyond recognition. This means that the types of
sub-selects for which this improvement applies are fairly limited, since
most subqueries satisfying those restrictions would have gotten flattened
into the parent query anyway. But it does help for some cases, such as
subqueries with ORDER BY or LIMIT.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
dots. I previously worked around this in initdb, mapping the known
problematic locale names to aliases that work, but Hiroshi Inoue pointed
out that that's not enough because even if you use one of the aliases, like
"Chinese_HKG", setlocale(LC_CTYPE, NULL) returns back the long form, ie.
"Chinese_Hong Kong S.A.R.". When we try to restore an old locale value by
passing that value back to setlocale(), it fails. Note that you are affected
by this bug also if you use one of those short-form names manually, so just
reverting the hack in initdb won't fix it.
To work around that, move the locale name mapping from initdb to a wrapper
around setlocale(), so that the mapping is invoked on every setlocale() call.
Also, add a few checks for failed setlocale() calls in the backend. These
calls shouldn't fail, and if they do there isn't much we can do about it,
but at least you'll get a warning.
Backpatch to 9.1, where the initdb hack was introduced. The Windows bug
affects older versions too if you set locale manually to one of the aliases,
but given the lack of complaints from the field, I'm hesitent to backpatch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Examination of examples provided by Mark Kirkwood and others has convinced
me that actually commit 7f3eba30c9d622d1981b1368f2d79ba0999cdff2 was quite
a few bricks shy of a load. The useful part of that patch was clamping
ndistinct for the inner side of a semi or anti join, and the reason why
that's needed is that it's the only way that restriction clauses
eliminating rows from the inner relation can affect the estimated size of
the join result. I had not clearly understood why the clamping was
appropriate, and so mis-extrapolated to conclude that we should clamp
ndistinct for the outer side too, as well as for both sides of regular
joins. These latter actions were all wrong, and are reverted with this
patch. In addition, the clamping logic is now made to affect the behavior
of both paths in eqjoinsel_semi, with or without MCV lists to compare.
When we have MCVs, we suppose that the most common values are the ones
that are most likely to survive the decimation resulting from a lower
restriction clause, so we think of the clamping as eliminating non-MCV
values, or potentially even the least-common MCVs for the inner relation.
Back-patch to 8.4, same as previous fixes in this area.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes an oversight in my commit
7f3eba30c9d622d1981b1368f2d79ba0999cdff2 of 2008-10-23. That patch
accounted for baserel restriction clauses that reduced the number of rows
coming out of a table (and hence the number of possibly-distinct values of
a join variable), but not for join restriction clauses that might have been
applied at a lower level of join. To account for the latter, look up the
sizes of the min_lefthand and min_righthand inputs of the current join,
and clamp with those in the same way as for the base relations.
Noted while investigating a complaint from Ben Chobot, although this in
itself doesn't seem to explain his report.
Back-patch to 8.4; previous versions used different estimation methods
for which this heuristic isn't relevant.
|
| |
|
|
|
|
|
|
| |
Previously, 'yesterday 04:00:00'::timestamp didn't do the same thing as
'04:00:00 yesterday'::timestamp, and the return value from the latter
was midnight rather than the specified time.
Dean Rasheed, with some stylistic changes
|
| |
|
|
|
| |
Per bug #6181 from Itagaki Takahiro. Also do some marginal code cleanup
and improve error handling.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
tsvector_concat() allocated its result workspace using the "conservative"
estimate of the sum of the two input tsvectors' sizes. Unfortunately that
wasn't so conservative as all that, because it supposed that the number of
pad bytes required could not grow. Which it can, as per test case from
Jesper Krogh, if there's a mix of lexemes with positions and lexemes
without them in the input data. The fix is to assume that we might add
a not-previously-present pad byte for each and every lexeme in the two
inputs; which really is conservative, but it doesn't seem worthwhile to
try to be more precise.
This is an aboriginal bug in tsvector_concat, so back-patch to all
versions containing it.
|
| |
|
|
|
|
| |
Use something like "error code %lu" for reporting GetLastError()
values on Windows. Previously, a mix of different wordings and
formats were in use.
|
| |
|
|
|
|
|
|
|
|
| |
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Writing
if (getnameinfo(...))
handle_error();
reads quite strangely, so use something like
if (getnameinfo(...) != 0)
handle_error();
instead.
|
| |
|
|
|
|
|
| |
It turns out to be possible to link against a libxml2.so that does this
differently than the version we configured and built against, so we need
a runtime check to avoid bizarre behavior. Per report from Bernd Helmle.
Patch by Florian Pflug.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, xpath() simply returned an empty array if the expression did
not yield a node set. This is useless for expressions that return scalars,
such as one with name() at the top level. Arrange to return the scalar
value as a single-element xml array, instead. (String values will be
suitably escaped.)
This change will also cause xpath_exists() to return true, not false,
for such expressions.
Florian Pflug, reviewed by Radoslaw Smogura
|
| |
|
|
|
|
|
|
|
|
|
| |
Without this it's possible for the output to not be legal XML, as
illustrated by the added regression test cases.
NB: this change will need to be called out as an incompatibility in the
9.2 release notes, since it's possible somebody was relying on the old
behavior, even though it's clearly wrong.
Florian Pflug, reviewed by Radoslaw Smogura
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When an AccessShareLock, RowShareLock, or RowExclusiveLock is requested
on an unshared database relation, and we can verify that no conflicting
locks can possibly be present, record the lock in a per-backend queue,
stored within the PGPROC, rather than in the primary lock table. This
eliminates a great deal of contention on the lock manager LWLocks.
This patch also refactors the interface between GetLockStatusData() and
pg_lock_status() to be a bit more abstract, so that we don't rely so
heavily on the lock manager's internal representation details. The new
fast path lock structures don't have a LOCK or PROCLOCK structure to
return, so we mustn't depend on that for purposes of listing outstanding
locks.
Review by Jeff Davis.
|
| |
|
|
|
|
| |
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
|
| |
|
|
| |
assigned.
|
