| Commit message (Collapse) | Author | Age |
|---|
| | |
|
| |
|
|
|
|
|
|
| |
... not on auxiliary processes. I managed to overlook the fact that I
had disabled assertions on my HEAD checkout long ago.
Hopefully this will turn the buildfarm green again, and put an end to
today's silliness.
|
| |
|
|
|
| |
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit d573e239f03506920938bf0be56c868d9c3416da, "Take fewer
snapshots". While that seemed like a good idea at the time, it caused
execution to use a snapshot that had been acquired before locking any of
the tables mentioned in the query. This created user-visible anomalies
that were not present in any prior release of Postgres, as reported by
Tomas Vondra. While this whole area could do with a redesign (since there
are related cases that have anomalies anyway), it doesn't seem likely that
any future patch would be reasonably back-patchable; and we don't want 9.2
to exhibit a behavior that's subtly unlike either past or future releases.
Hence, revert to prior code while we rethink the problem.
|
| |
|
|
|
|
|
|
| |
The regular backend's main loop handles signal handling and error recovery
better than the current WAL sender command loop does. For example, if the
client hangs and a SIGTERM is received before starting streaming, the
walsender will now terminate immediately, rather than hang until the
connection times out.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace unix_socket_directory with unix_socket_directories, which is a list
of socket directories, and adjust postmaster's code to allow zero or more
Unix-domain sockets to be created.
This is mostly a straightforward change, but since the Unix sockets ought
to be created after the TCP/IP sockets for safety reasons (better chance
of detecting a port number conflict), AddToDataDirLockFile needs to be
fixed to support out-of-order updates of data directory lockfile lines.
That's a change that had been foreseen to be necessary someday anyway.
Honza Horak, reviewed and revised by Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Management of timeouts was getting a little cumbersome; what we
originally had was more than enough back when we were only concerned
about deadlocks and query cancel; however, when we added timeouts for
standby processes, the code got considerably messier. Since there are
plans to add more complex timeouts, this seems a good time to introduce
a central timeout handling module.
External modules register their timeout handlers during process
initialization, and later enable and disable them as they see fit using
a simple API; timeout.c is in charge of keeping track of which timeouts
are in effect at any time, installing a common SIGALRM signal handler,
and calling setitimer() as appropriate to ensure timely firing of
external handlers.
timeout.c additionally supports pluggable modules to add their own
timeouts, though this capability isn't exercised anywhere yet.
Additionally, as of this commit, walsender processes are aware of
timeouts; we had a preexisting bug there that made those ignore SIGALRM,
thus being subject to unhandled deadlocks, particularly during the
authentication phase. This has already been fixed in back branches in
commit 0bf8eb2a, which see for more details.
Main author: Zoltán Böszörményi
Some review and cleanup by Álvaro Herrera
Extensive reworking by Tom Lane
|
| |
|
|
|
|
|
| |
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
|
| |
|
|
|
|
|
|
|
|
|
| |
There was a wild mix of calling conventions: Some were declared to
return void and didn't return, some returned an int exit code, some
claimed to return an exit code, which the callers checked, but
actually never returned, and so on.
Now all of these functions are declared to return void and decorated
with attribute noreturn and don't return. That's easiest, and most
code already worked that way.
|
| |
|
|
| |
commit-fest.
|
| |
|
|
|
|
|
| |
"Unexpected EOF on client connection" without an open transaction
is mostly noise, so turn it into DEBUG1. With an open transaction it's
still indicating a problem, so keep those as ERROR, and change the message
to indicate that it happened in a transaction.
|
| |
|
|
| |
Found these with grep -r "for for ".
|
| |
|
|
|
|
|
|
|
| |
The previous code could cause a backend crash after BEGIN; SAVEPOINT a;
LOCK TABLE foo (interrupted by ^C or statement timeout); ROLLBACK TO
SAVEPOINT a; LOCK TABLE foo, and might have leaked strong-lock counts
in other situations.
Report by Zoltán Böszörményi; patch review by Jeff Davis.
|
| |
|
|
|
|
| |
This was a thinko in previous commit. Now that stack base pointer is now set
in PostmasterMain and SubPostmasterMain, it doesn't need to be set in
PostgresMain anymore.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We used to only initialize the stack base pointer when starting up a regular
backend, not in other processes. In particular, autovacuum workers can run
arbitrary user code, and without stack-depth checking, infinite recursion
in e.g an index expression will bring down the whole cluster.
The comment about PL/Java using set_stack_base() is not yet true. As the
code stands, PL/java still modifies the stack_base_ptr variable directly.
However, it's been discussed in the PL/Java mailing list that it should be
changed to use the function, because PL/Java is currently oblivious to the
register stack used on Itanium. There's another issues with PL/Java, namely
that the stack base pointer it sets is not really the base of the stack, it
could be something close to the bottom of the stack. That's a separate issue
that might need some further changes to this code, but that's a different
story.
Backpatch to all supported releases.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a queryId field to Query and PlannedStmt. This is not used by the
core backend, except for being copied around at appropriate times.
It's meant to allow plug-ins to track a particular query forward from
parse analysis to execution.
The queryId is intentionally not dumped into stored rules (and hence this
commit doesn't bump catversion). You could argue that choice either way,
but it seems better that stored rule strings not have any dependency
on plug-ins that might or might not be present.
Also, add a post_parse_analyze_hook that gets invoked at the end of
parse analysis (but only for top-level analysis of complete queries,
not cases such as analyzing a domain's default-value expression).
This is mainly meant to be used to compute and assign a queryId,
but it could have other applications.
Peter Geoghegan
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
|
| |
|
|
|
|
|
|
| |
It now prints the argument that was at fault.
Also fix a small misbehavior where the error message issued by
getopt() would complain about a program named "--single", because
that's what argv[0] is in the server process.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This separates the state (running/idle/idleintransaction etc) into
it's own field ("state"), and leaves the query field containing just
query text.
The query text will now mean "current query" when a query is running
and "last query" in other states. Accordingly,the field has been
renamed from current_query to query.
Since backwards compatibility was broken anyway to make that, the procpid
field has also been renamed to pid - along with the same field in
pg_stat_replication for consistency.
Scott Mead and Magnus Hagander, review work from Greg Smith
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a PORTAL_ONE_SELECT query is executed, we can opportunistically
reuse the parse/plan shot for the execution phase. This cuts down the
number of snapshots per simple query from 2 to 1 for the simple
protocol, and 3 to 2 for the extended protocol. Since we are only
reusing a snapshot taken early in the processing of the same protocol
message, the change shouldn't be user-visible, except that the remote
possibility of the planning and execution snapshots being different is
eliminated.
Note that this change does not make it safe to assume that the parse/plan
snapshot will certainly be reused; that will currently only happen if
PortalStart() decides to use the PORTAL_ONE_SELECT strategy. It might
be worth trying to provide some stronger guarantees here in the future,
but for now we don't.
Patch by me; review by Dimitri Fontaine.
|
| |
|
|
|
|
|
| |
lost. The only way we detect that at the moment is when write() fails when
we try to write to the socket.
Florian Pflug with small changes by me, reviewed by Greg Jaskiewicz.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
|
| |
|
|
|
|
| |
pg_ctl use that to query the data directory for config-only installs.
This fixes awkward or impossible pg_ctl operation for config-only
installs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rewrite plancache.c so that a "cached plan" (which is rather a misnomer
at this point) can support generation of custom, parameter-value-dependent
plans, and can make an intelligent choice between using custom plans and
the traditional generic-plan approach. The specific choice algorithm
implemented here can probably be improved in future, but this commit is
all about getting the mechanism in place, not the policy.
In addition, restructure the API to greatly reduce the amount of extraneous
data copying needed. The main compromise needed to make that possible was
to split the initial creation of a CachedPlanSource into two steps. It's
worth noting in particular that SPI_saveplan is now deprecated in favor of
SPI_keepplan, which accomplishes the same end result with zero data
copying, and no need to then spend even more cycles throwing away the
original SPIPlan. The risk of long-term memory leaks while manipulating
SPIPlans has also been greatly reduced. Most of this improvement is based
on use of the recently-added MemoryContextSetParent primitive.
|
| |
|
|
|
|
|
|
|
|
|
| |
We were doing some amazingly complicated things in order to avoid running
the very expensive identify_system_timezone() procedure during GUC
initialization. But there is an obvious fix for that, which is to do it
once during initdb and have initdb install the system-specific default into
postgresql.conf, as it already does for most other GUC variables that need
system-environment-dependent defaults. This means that the timezone (and
log_timezone) settings no longer have any magic behavior in the server.
Per discussion.
|
| |
|
|
|
|
|
|
|
|
|
| |
As per my recent proposal, this refactors things so that these typedefs and
macros are available in a header that can be included in frontend-ish code.
I also changed various headers that were undesirably including
utils/timestamp.h to include datatype/timestamp.h instead. Unsurprisingly,
this showed that half the system was getting utils/timestamp.h by way of
xlog.h.
No actual code changes here, just header refactoring.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In pursuit of this (and with the expectation that WaitLatch will be needed
in more places), convert the latch field that was already added to PGPROC
for sync rep into a generic latch that is activated for all PGPROC-owning
processes, and change many of the standard backend signal handlers to set
that latch when a signal happens. This will allow WaitLatch callers to be
wakened properly by these signals.
In passing, fix a whole bunch of signal handlers that had been hacked to do
things that might change errno, without adding the necessary save/restore
logic for errno. Also make some minor fixes in unix_latch.c, and clean
up bizarre and unsafe scheme for disowning the process's latch. Much of
this has to be back-patched into 9.1.
Peter Geoghegan, with additional work by Tom
|
| |
|
|
|
|
| |
There may be some other places where we should use errdetail_internal,
but they'll have to be evaluated case-by-case. This commit just hits
a bunch of places where invoking gettext is obviously a waste of cycles.
|
| |
|
|
|
| |
We had previously (af26857a2775e7ceb0916155e931008c2116632f)
established the U.S. spellings as standard.
|
| |
|
|
|
|
|
|
|
|
| |
This option turns off autovacuum, prevents non-super-user connections,
and enables oid setting hooks in the backend. The code continues to use
the old autoavacuum disable settings for servers with earlier catalog
versions.
This includes a catalog version bump to identify servers that support
the -b option.
|
| |
|
|
|
| |
to the regular stack. The code to do that is platform and compiler specific,
add support for the HP-UX native compiler.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous functions of assign hooks are now split between check hooks
and assign hooks, where the former can fail but the latter shouldn't.
Aside from being conceptually clearer, this approach exposes the
"canonicalized" form of the variable value to guc.c without having to do
an actual assignment. And that lets us fix the problem recently noted by
Bernd Helmle that the auto-tune patch for wal_buffers resulted in bogus
log messages about "parameter "wal_buffers" cannot be changed without
restarting the server". There may be some speed advantage too, because
this design lets hook functions avoid re-parsing variable values when
restoring a previous state after a rollback (they can store a pre-parsed
representation of the value instead). This patch also resolves a
longstanding annoyance about custom error messages from variable assign
hooks: they should modify, not appear separately from, guc.c's own message
about "invalid parameter value".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Don't ignore query cancel interrupts. Instead, if the user asks to
cancel the query after we've already committed it, but before it's on
the standby, just emit a warning and let the COMMIT finish.
2. Don't ignore die interrupts (pg_terminate_backend or fast shutdown).
Instead, emit a warning message and close the connection without
acknowledging the commit. Other backends will still see the effect of
the commit, but there's no getting around that; it's too late to abort
at this point, and ignoring die interrupts altogether doesn't seem like
a good idea.
3. If synchronous_standby_names becomes empty, wake up all backends
waiting for synchronous replication to complete. Without this, someone
attempting to shut synchronous replication off could easily wedge the
entire system instead.
4. Avoid depending on the assumption that if a walsender updates
MyProc->syncRepState, we'll see the change even if we read it without
holding the lock. The window for this appears to be quite narrow (and
probably doesn't exist at all on machines with strong memory ordering)
but protecting against it is practically free, so do that.
5. Remove useless state SYNC_REP_MUST_DISCONNECT, which isn't needed and
doesn't actually do anything.
There's still some further work needed here to make the behavior of fast
shutdown plausible, but that looks complex, so I'm leaving it for a
separate commit. Review by Fujii Masao.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
|
| | |
|
| |
|
|
|
|
|
|
|
| |
Previously reported as ERRCODE_ADMIN_SHUTDOWN, this case is now
reported as ERRCODE_T_R_DATABASE_DROPPED. No message text change.
Unlikely to happen on most servers, so low impact change to allow
session poolers to correctly handle this situation.
Tatsuo Ishii, edits by me, review by Robert Haas
|
| |
|
|
|
|
|
| |
We only need that header when compiling with icc, since the gcc variant of
ia64_get_bsp() uses in-line assembly code. Per report from Frank Brendel,
the header doesn't exist on all IA64 platforms; so don't include it unless
we need it.
|
| |
|
|
|
| |
Add the view pg_stat_database_conflicts and a column to pg_stat_database,
and the underlying functions to provide the information.
|
| | |
|
| |
|
|
| |
This improves tag output by log_line_prefix
|
| |
|
|
|
|
|
|
|
|
| |
We don't actually need optreset, because we can easily fix the code to
ensure that it's cleanly restartable after having completed a scan over the
argv array; which is the only case we need to restart in. Getting rid of
it avoids a class of interactions with the system libraries and allows
reversion of my change of yesterday in postmaster.c and postgres.c.
Back-patch to 8.4. Before that the getopt code was a bit different anyway.
|
| |
|
|
|
|
|
|
|
| |
The mingw people don't appear to care about compatibility with non-GNU
versions of getopt, so force use of our own copy of getopt on Windows.
Also, ensure that we make use of optreset when using our own copy.
Per report from Andrew Dunstan. Back-patch to all versions supported
on Windows.
|
| |
|
|
|
|
|
|
|
| |
Per recent investigation, the register stack can grow faster than the
regular stack depending on compiler and choice of options. To avoid
crashes we must check both stacks in check_stack_depth().
Since this is poorly-tested code, committing only to HEAD for the
moment ... but we might want to consider back-patching later.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Rather than considering this result as meaning "unknown", report LONG_MAX.
This won't change what superusers can set max_stack_depth to, but it will
cause InitializeGUCOptions() to set the built-in default to 2MB not 100kB.
The latter seems like a fairly unreasonable interpretation of "infinity".
Per my investigation of odd buildfarm results as well as an old complaint
from Heikki.
Since this should persuade all the buildfarm animals to use a reasonable
stack depth setting during "make check", revert previous patch that dumbed
down a recursive regression test to only 5 levels.
|
| |
|
|
|
|
|
| |
I'm mainly interested in finding out what it is on buildfarm machines,
but including the active value in the message seems like good practice
in any case. Add the info to the HINT, not the ERROR string, so as not
to change the regression tests' expected output.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
|
| |
|
|
| |
Fujii Masao
|
