| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
| |
During decoding of an in-progress or prepared transaction, we detect
concurrent abort with an error code ERRCODE_TRANSACTION_ROLLBACK. That is
not sufficient because a callback can decide to throw that error code
at other times as well.
Reported-by: Tom Lane
Author: Amit Kapila
Reviewed-by: Dilip Kumar
Discussion: https://postgr.es/m/CAA4eK1KCjPRS4aZHB48QMM4J8XOC1+TD8jo-4Yu84E+MjwqVhA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Previously, we were using the size of all the changes present in
ReorderBuffer to compute total_bytes after decoding a transaction and that
can lead to counting some of the transactions' changes more than once. Fix
it by using the size of the changes decoded for a transaction to compute
'total_bytes'.
Author: Sawada Masahiko
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were two problems:
a. We were always selecting the next available txn instead of selecting it
when it is larger than the previous transaction.
b. We were selecting the transactions which haven't made any changes to
the database (base snapshot is not set). Later it was hitting an Assert
because we don't decode such transactions and the changes in txn remain as
it is. It is better not to choose such transactions for streaming in the
first place.
Reported-by: Haiying Tang
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB61133B94E63177040F7ECDA1FB429@OS0PR01MB6113.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We had a report of confusing server behavior caused by a client bug
that sent junk to the server: the server thought the junk was a
very long message length and waited patiently for data that would
never come. We can reduce the risk of that by being less trusting
about message lengths.
For a long time, libpq has had a heuristic rule that it wouldn't
believe large message size words, except for a small number of
message types that are expected to be (potentially) long. This
provides some defense against loss of message-boundary sync and
other corrupted-data cases. The server does something similar,
except that up to now it only limited the lengths of messages
received during the connection authentication phase. Let's
do the same as in libpq and put restrictions on the allowed
length of all messages, while distinguishing between message
types that are expected to be long and those that aren't.
I used a limit of 10000 bytes for non-long messages. (libpq's
corresponding limit is 30000 bytes, but given the asymmetry of
the FE/BE protocol, there's no good reason why the numbers should
be the same.) Experimentation suggests that this is at least a
factor of 10, maybe a factor of 100, more than we really need;
but plenty of daylight seems desirable to avoid false positives.
In any case we can adjust the limit based on beta-test results.
For long messages, set a limit of MaxAllocSize - 1, which is the
most that we can absorb into the StringInfo buffer that the message
is collected in. This just serves to make sure that a bogus message
size is reported as such, rather than as a confusing gripe about
not being able to enlarge a string buffer.
While at it, make sure that non-mainline code paths (such as
COPY FROM STDIN) are as paranoid as SocketBackend is, and validate
the message type code before believing the message length.
This provides an additional guard against getting stuck on corrupted
input.
Discussion: https://postgr.es/m/2003757.1619373089@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Truncate operation acquires an exclusive lock on the target relation
and indexes. It then waits for logical replication of the operation to
finish at commit. Now because we are acquiring the shared lock on the
target index to get index attributes in pgoutput while sending the
changes for the Truncate operation, it leads to a deadlock.
Actually, we don't need to acquire a lock on the target index as we build
the cache entry using a historic snapshot and all the later changes are
absorbed while decoding WAL. So, we wrote a special purpose function for
logical replication to get a bitmap of replica identity attribute numbers
where we get that information without locking the target index.
We decided not to backpatch this as there doesn't seem to be any field
complaint about this issue since it was introduced in commit 5dfd1e5a in
v11.
Reported-by: Haiying Tang
Author: Takamichi Osumi, test case by Li Japin
Reviewed-by: Amit Kapila, Ajin Cherian
Discussion: https://postgr.es/m/OS0PR01MB6113C2499C7DC70EE55ADB82FB759@OS0PR01MB6113.jpnprd01.prod.outlook.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
We send the prepare for the concurrently aborted xacts so that later when
rollback prepared is decoded and sent, the downstream should be able to
rollback such a xact. For 'streaming' case (when we send changes for
in-progress transactions), we were sending prepare twice when concurrent
abort was detected.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/f82133c6-6055-b400-7922-97dae9f2b50b@enterprisedb.com
|
| |
|
|
|
| |
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+PtvzuYY0zu=dVRK_WVz5WGos1+otZWgEWqjha1ncoSRag@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Creating a trigger on a relation to which an apply operation is
triggered would cause a relation leak once the change gets committed,
as the executor would miss that the relation needs to be closed
beforehand. This issue got introduced with the refactoring done in
1375422c, where it becomes necessary to track relations within
es_opened_result_relations to make sure that they are closed.
We have discussed using ExecInitResultRelation() coupled with
ExecCloseResultRelations() for the relations in need of tracking by the
apply operations in the subscribers, which would simplify greatly the
opening and closing of indexes, but this requires a larger rework and
reorganization of the worker code, particularly for the tuple routing
part. And that's not really welcome post feature freeze. So, for now,
settle down to the same solution as TRUNCATE which is to fill in
es_opened_result_relations with the relation opened, to make sure that
ExecGetTriggerResultRel() finds them and that they get closed.
The code is lightly refactored so as a relation is not registered three
times for each DML code path, making the whole a bit easier to follow.
Reported-by: Tang Haiying, Shi Yu, Hou Zhijie
Author: Amit Langote, Masahiko Sawada, Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/OS0PR01MB611383FA0FE92EB9DE21946AFB769@OS0PR01MB6113.jpnprd01.prod.outlook.com
|
| |
|
|
| |
Should be signed, not unsigned.
|
| |
|
|
| |
Should be %u rather than %d.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
This will make it consistent with the other usage of slotname in the code.
In the passing, change pgstat_report_replslot signature to use a structure
rather than multiple parameters.
Reported-by: Andres Freund
Author: Vignesh C
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
|
| |
|
|
|
| |
The previous wording contained a superfluous comma. Adjust phrasing
for grammatical correctness and clarity.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Arrange to do some things on-demand, rather than immediately during
executor startup, because there's a fair chance of never having to do
them at all:
* Don't open result relations' indexes until needed.
* Don't initialize partition tuple routing, nor the child-to-root
tuple conversion map, until needed.
This wins in UPDATEs on partitioned tables when only some of the
partitions will actually receive updates; with larger partition
counts the savings is quite noticeable. Also, we can remove some
sketchy heuristics in ExecInitModifyTable about whether to set up
tuple routing.
Also, remove execPartition.c's private hash table tracking which
partitions were already opened by the ModifyTable node. Instead
use the hash added to ModifyTable itself by commit 86dc90056.
To allow lazy computation of the conversion maps, we now set
ri_RootResultRelInfo in all child ResultRelInfos. We formerly set it
only in some, not terribly well-defined, cases. This has user-visible
side effects in that now more error messages refer to the root
relation instead of some partition (and provide error data in the
root's column order, too). It looks to me like this is a strict
improvement in consistency, so I don't have a problem with the
output changes visible in this commit.
Extracted from a larger patch, which seemed to me to be too messy
to push in one commit.
Amit Langote, reviewed at different times by Heikki Linnakangas and
myself
Discussion: https://postgr.es/m/CA+HiwqG7ZruBmmih3wPsBZ4s0H2EhywrnXEduckY5Hr3fWzPWA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
An upcoming patch might remove the (now indirect) proc.h
include (which in turn includes other headers), and it's cleaner for
the modified files to include their dependencies directly anyway...
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The term 'default roles' wasn't quite apt as these roles aren't able to
be modified or removed after installation, so rename them to be
'Predefined Roles' instead, adding an entry into the newly added
Obsolete Appendix to help users of current releases find the new
documentation.
Bruce Momjian and Stephen Frost
Discussion: https://postgr.es/m/157742545062.1149.11052653770497832538%40wrigleys.postgresql.org
and https://www.postgresql.org/message-id/20201120211304.GG16415@tamriel.snowman.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
It is possible that while decoding a prepared transaction, it gets aborted
concurrently via a ROLLBACK PREPARED command. In that case, we were
skipping all the changes and directly sending Rollback Prepared when we
find the same in WAL. However, the downstream has no idea of the GID of
such a transaction. So, ensure to send prepare even when a concurrent
abort is detected.
Author: Ajin Cherian
Reviewed-by: Markus Wanner, Amit Kapila
Discussion: https://postgr.es/m/f82133c6-6055-b400-7922-97dae9f2b50b@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Put the remote end's error message into the primary error string,
instead of relegating it to errdetail(). Although this could end up
being awkward if the remote sends us a really long error message,
it seems more in keeping with our message style guidelines, and more
helpful in situations where the errdetail could get dropped.
Peter Smith
Discussion: https://postgr.es/m/CAHut+Ps-Qv2yQceCwobQDP0aJOkfDzRFrOaR6+2Op2K=WHGeWg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
|
| |
|
|
|
|
|
|
|
| |
Combo CIDs were referred in the code comments using different terms
across various places of the code, so unify a bit the term used with
what is currently in use in some of the READMEs.
Author: "Hou, Zhijie"
Discussion: https://postgr.es/m/1d42865c91404f46af4562532fdbea31@G08CNEXMBPEKD05.g08.fujitsu.local
|
| |
|
|
| |
Make it the same as another nearby message.
|
| |
|
|
|
|
|
|
|
|
|
| |
Commit de829ddf23 added wait event WalrcvExit. But its name is not
consistent with other wait events like WalReceiverMain or
WalReceiverWaitStart, etc. So this commit renames WalrcvExit to
WalReceiverExit.
Author: Fujii Masao
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/cced9995-8fa2-7b22-9d91-3f22a2b8c23c@oss.nttdata.com
|
| |
|
|
|
|
|
| |
We can't access the entry after it is removed from dynahash.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Ps-pL++f6CJwPx2+vUqXuew=Xt-9Bi-6kCyxn+Fwi2M7w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
We leaked the error report from PQconninfoParse, when there was
one. It seems unlikely that real usage patterns would repeat
the failure often enough to create serious bloat, but let's
back-patch anyway to keep the code similar in all branches.
Found via valgrind testing.
Back-patch to v10 where this code was added.
Discussion: https://postgr.es/m/3816764.1616104288@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit ce0fdbfe97 made tablesync slots permanent and allow Drop
Subscription to drop such slots. However, it is possible that before
tablesync worker could get the acknowledgment of slot creation, drop
subscription stops it and that can lead to a dangling slot on the
publisher. Prevent cancel/die interrupts while creating a slot in the
tablesync worker.
Reported-by: Thomas Munro as per buildfarm
Author: Amit Kapila
Reviewed-by: Vignesh C, Takamichi Osumi
Discussion: https://postgr.es/m/CA+hUKGJG9dWpw1cOQ2nzWU8PHjm=PTraB+KgE5648K9nTfwvxg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pipeline mode in libpq lets an application avoid the Sync messages in
the FE/BE protocol that are implicit in the old libpq API after each
query. The application can then insert Sync at its leisure with a new
libpq function PQpipelineSync. This can lead to substantial reductions
in query latency.
Co-authored-by: Craig Ringer <craig.ringer@enterprisedb.com>
Co-authored-by: Matthieu Garrigues <matthieu.garrigues@gmail.com>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aya Iwata <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Vérité <daniel@manitou-mail.org>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kirk Jamison <k.jamison@fujitsu.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Nikhil Sontakke <nikhils@2ndquadrant.com>
Reviewed-by: Vaishnavi Prabakaran <VaishnaviP@fast.au.fujitsu.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CAMsr+YFUjJytRyV4J-16bEoiZyH=4nj+sQ7JP9ajwz=B4dMMZw@mail.gmail.com
Discussion: https://postgr.es/m/CAJkzx4T5E-2cQe3dtv2R78dYFvz+in8PY7A8MArvLhs_pg75gg@mail.gmail.com
|
| |
|
|
|
|
|
| |
Use this new CV to wait for walreceiver shutdown without a sleep/poll
loop, while also benefiting from standard postmaster death handling.
Discussion: https://postgr.es/m/CA%2BhUKGK1607VmtrDUHQXrsooU%3Dap4g4R2yaoByWOOA3m8xevUQ%40mail.gmail.com
|
| |
|
|
| |
This makes the wording of the delete case match the update case.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
|
| |
|
|
|
|
|
|
|
|
| |
This avoids the need to set up and tear down a fresh WaitEventSet every
time we need need to wait. We have to add an explicit exit on
postmaster exit (FeBeWaitSet isn't set up to do that automatically), so
move the code to do that into a new function to avoid repetition.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Commit a271a1b50e introduced decoding at prepare time in ReorderBuffer.
This can lead to deadlock for out-of-core logical replication solutions
that uses this feature to build distributed 2PC in case such transactions
lock [user] catalog tables exclusively. They need to inform users to not
have locks on catalog tables (via explicit LOCK command) in such
transactions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210222222847.tpnb6eg3yiykzpky@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
| |
Add a macro LSN_FORMAT_ARGS for use in printf-style printing of LSNs.
Convert all applicable code to use it.
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/CAExHW5ub5NaTELZ3hJUCE6amuvqAtsSxc7O+uK7y4t9Rrk23cw@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
We don't have anything to decode in a transaction if ReorderBufferTXN
doesn't exist by the time we decode the commit prepared. So don't create a
new ReorderBufferTXN here. This is an oversight in commit a271a1b5.
Reported-by: Markus Wanner
Discussion: https://postgr.es/m/dbec82e2-dbd7-95a2-c6b6-e488cbbdf853@bluegap.ch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 2c8dd05d6c added the atomic variable writtenUpto into
walreceiver's shared memory information. It's initialized only
when walreceiver started up but could be read via pg_stat_wal_receiver
view anytime, i.e., even before it's initialized. In the server built
with --disable-atomics and --disable-spinlocks, this uninitialized
atomic variable read could cause "invalid spinlock number: 0" error.
This commit changed writtenUpto so that it's initialized at
the postmaster startup, to avoid the uninitialized variable read
via pg_stat_wal_receiver and fix the error.
Also this commit moved the read of writtenUpto after the release
of spinlock protecting walreceiver's shared variables. This is
necessary to prevent new spinlock from being taken by atomic
variable read while holding another spinlock, and to shorten
the spinlock duration. This change leads writtenUpto not to be
consistent with the other walreceiver's shared variables protected
by a spinlock. But this is OK because writtenUpto should not be
used for data integrity checks.
Back-patch to v13 where commit 2c8dd05d6c introduced the bug.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/7ef8708c-5b6b-edd3-2cf2-7783f1c7c175@oss.nttdata.com
|
| |
|
|
|
|
| |
An inconsistent set of debug-level messages was not using
errmsg_internal(), thus uselessly exposing the messages to translation
work. Fix those.
|
