| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous coding essentially assumed that nodes would be rescanned in
the same order they were initialized in; or at least that the "leader" of
a group of CTEscans would be rescanned before any others were required to
execute. Unfortunately, that isn't even a little bit true. It's possible
to devise queries in which the leader isn't rescanned until other CTEscans
on the same CTE have run to completion, or even in which the leader never
gets a rescan call at all.
The fix makes the leader specially responsible only for initial creation
and final destruction of the tuplestore; rescan resets are now a
symmetrically shared responsibility. This means that we might reset the
tuplestore multiple times when restarting a plan subtree containing
multiple CTEscans; but resetting an already-empty tuplestore is cheap
enough that that doesn't seem like a problem.
Per report from Adam Mackler; the new regression test cases are based on
his example query.
Back-patch to 8.4 where CTE scans were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a whole-row Var is reading the result of a subquery, we need it to
ignore any "resjunk" columns that the subquery might have evaluated for
GROUP BY or ORDER BY purposes. We've hacked this area before, in commit
68e40998d058c1f6662800a648ff1e1ce5d99cba, but that fix only covered
whole-row Vars of named composite types, not those of RECORD type; and it
was mighty klugy anyway, since it just assumed without checking that any
extra columns in the result must be resjunk. A proper fix requires getting
hold of the subquery's targetlist so we can actually see which columns are
resjunk (whereupon we can use a JunkFilter to get rid of them). So bite
the bullet and add some infrastructure to make that possible.
Per report from Andrew Dunstan and additional testing by Merlin Moncure.
Back-patch to all supported branches. In 8.3, also back-patch commit
292176a118da6979e5d368a4baf27f26896c99a5, which for some reason I had
not done at the time, but it's a prerequisite for this change.
|
| |
|
|
|
|
|
|
|
|
|
| |
Repeated execution of an uncorrelated ARRAY_SUBLINK sub-select (which
I think can only happen if the sub-select is embedded in a larger,
correlated subquery) would leak memory for the duration of the query,
due to not reclaiming the array generated in the previous execution.
Per bug #6698 from Armando Miraglia. Diagnosis and fix idea by Heikki,
patch itself by me.
This has been like this all along, so back-patch to all supported versions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This was never intended to be allowed, and is blocked for an ordinary
CREATE TABLE, but CREATE TABLE AS slipped through the cracks. This
commit won't do anything to fix existing cases where this has loophole
has been exploited, but it still seems prudent to lock it down going
forward.
Back-branch commit only, as this problem has been refactored away
on the master branch.
Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can't just skip initializing such subplans, because the referencing CTE
node will expect to find the subplan available when it initializes. That
in turn means that ExecInitModifyTable must allow the case (which actually
it needed to do anyway, since there's no guarantee that ModifyTable is
exactly at the top of the CTE plan tree). So move the complaint about not
being allowed in EvalPlanQual mode to execution instead of initialization.
Testing turned up yet another problem, which is that we'd try to
re-initialize the result relation's index list, leading to leaks and
dangling pointers.
Per report from Phil Sorber. Back-patch to 9.1 where data-modifying CTEs
were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
If we use a PlaceHolderVar from the outer relation in an inner indexscan,
we need to reference the PlaceHolderVar as such as the value to be passed
in from the outer relation. The previous code effectively tried to
reconstruct the PHV from its component expression, which doesn't work since
(a) the Vars therein aren't necessarily bubbled up far enough, and (b) it
would be the wrong semantics anyway because of the possibility that the PHV
is supposed to have gone to null at some point before the current join.
Point (a) led to "variable not found in subplan target list" planner
errors, but point (b) would have led to silently wrong answers.
Per report from Roger Niederland.
|
| |
|
|
|
|
|
|
|
| |
Due to tuple-slot mismanagement, evaluation of WHEN conditions for AFTER
ROW UPDATE triggers could crash if there had been a BEFORE ROW trigger
fired for the same update. Fix by not trying to overload the use of
estate->es_trig_tuple_slot. Per report from Yoran Heling.
Back-patch to 9.0, when trigger WHEN conditions were introduced.
|
| |
|
|
| |
This fixes bug #6139 reported by Hitoshi Harada.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Unlike the relistemp field which it replaced, relpersistence must be
set correctly quite early during the table creation process, as we
rely on it quite early on for a number of purposes, including security
checks. Normally, this is set based on whether the user enters CREATE
TABLE, CREATE UNLOGGED TABLE, or CREATE TEMPORARY TABLE, but a
relation may also be made implicitly temporary by creating it in
pg_temp. This patch fixes the handling of that case, and also
disables creation of unlogged tables in temporary tablespace (such
table indeed skip WAL-logging, but we reject an explicit
specification) and creation of relations in the temporary schemas of
other sessions (which is not very sensible, and didn't work right
anyway).
Report by Amit Khandekar.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
more consistent that way, since all the other PredicateLock* calls are
made in various heapam.c and index AM functions. The call in nodeSeqscan.c
was unnecessarily aggressive anyway, there's no need to try to lock the
relation every time a tuple is fetched, it's enough to do it once.
This has the user-visible effect that if a seq scan is initialized in the
executor, but never executed, we now acquire the predicate lock on the heap
relation anyway. We could avoid that by taking the lock on the first
heap_getnext() call instead, but it doesn't seem worth the trouble given
that it feels more natural to do it in heap_beginscan().
Also, remove the retail PredicateLockTuple() calls from heap_getnext(). In
a seqscan, started with heap_begin(), we're holding a whole-relation
predicate lock on the heap so there's no need to lock the tuples
individually.
Kevin Grittner and me
|
| |
|
|
|
|
| |
Non-lossy case was already handled correctly.
Kevin Grittner
|
| | |
|
| |
|
|
|
|
|
|
| |
snapshots, like in REINDEX, are basically non-transactional operations. The
DDL operation itself might participate in SSI, but there's separate
functions for that.
Kevin Grittner and Dan Ports, with some changes by me.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can't allow this because such an operation stores its transaction XID
into the sequence tuple's xmax. Because VACUUM doesn't process sequences
(and we don't want it to start doing so), such an xmax value won't get
frozen, meaning it will eventually refer to nonexistent pg_clog storage,
and even wrap around completely. Since the row lock is ignored by nextval
and setval, the usefulness of the operation is highly debatable anyway.
Per reports of trouble with pgpool 3.0, which had ill-advisedly started
using such commands as a form of locking.
In HEAD, also disallow SELECT FOR UPDATE/SHARE on toast tables. Although
this does work safely given the current implementation, there seems no
good reason to allow it. I refrained from changing that behavior in
back branches, however.
|
| |
|
|
|
|
|
|
|
|
|
| |
Per experimentation with a recent example, in which unreasonable amounts
of time could elapse before the backend would respond to a query-cancel.
This might be something to back-patch, but the patch doesn't apply cleanly
because this code was rewritten for 9.1. Given the lack of field
complaints I won't bother for now.
Cédric Villemain
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The planner can sometimes compute very large values for numGroups, and in
cases where we have no alternative to building a hashtable, such a value
will get fed directly to BuildTupleHashTable as its nbuckets parameter.
There were two ways in which that could go bad. First, BuildTupleHashTable
declared the parameter as "int" but most callers were passing "long"s,
so on 64-bit machines undetected overflow could occur leading to a bogus
negative value. The obvious fix for that is to change the parameter to
"long", which is what I've done in HEAD. In the back branches that seems a
bit risky, though, since third-party code might be calling this function.
So for them, just put in a kluge to treat negative inputs as INT_MAX.
Second, hash_create can go nuts with extremely large requested table sizes
(notably, my_log2 becomes an infinite loop for inputs larger than
LONG_MAX/2). What seems most appropriate to avoid that is to bound the
initial table size request to work_mem.
This fixes bug #6035 reported by Daniel Schreiber. Although the reported
case only occurs back to 8.4 since it involves WITH RECURSIVE, I think
it's a good idea to install the defenses in all supported branches.
|
| |
|
|
|
|
| |
there's no quals or projections. Currently this only matters for foreign
scans, as none of the other scan nodes litter the per-tuple memory context
when there's no quals or projections.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
|
| |
|
|
|
|
|
| |
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
|
| |
|
|
|
|
|
|
|
|
|
| |
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
|
| |
|
|
|
|
| |
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
|
| | |
|
| | |
|
| |
|
|
|
| |
I found actual bugs in GiST and plpgsql; the rest of this is cosmetic
but meant to decrease the odds of future bugs of omission.
|
| |
|
|
|
|
|
|
|
| |
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
|
| |
|
|
|
|
|
|
|
|
| |
Ensure that parameter symbols receive collation from the function's
resolved input collation, and fix inlining to behave properly.
BTW, this commit lays about 90% of the infrastructure needed to support
use of argument names in SQL functions. Parsing of parameters is now
done via the parser-hook infrastructure ... we'd just need to supply
a column-ref hook ...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
|
| |
|
|
|
|
|
|
|
|
|
| |
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this patch, portals, SQL functions, and SPI all agree that there
should be only a CommandCounterIncrement between the queries that are
generated from a single SQL command by rule expansion. Fetching a whole
new snapshot now happens only between original queries. This is equivalent
to the existing behavior of EXPLAIN ANALYZE, and it was judged to be the
best choice since it eliminates one source of concurrency hazards for
rules. The patch should also make things marginally faster by reducing the
number of snapshot push/pop operations.
The patch removes pg_parse_and_rewrite(), which is no longer used anywhere.
There was considerable discussion about more aggressive refactoring of the
query-processing functions exported by postgres.c, but for the moment
nothing more has been done there.
I also took the opportunity to refactor snapmgr.c's API slightly: the
former PushUpdatedSnapshot() has been split into two functions.
Marko Tiikkaja, reviewed by Steve Singer and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The originally committed patch for modifying CTEs didn't interact well
with EXPLAIN, as noted by myself, and also had corner-case problems with
triggers, as noted by Dean Rasheed. Those problems show it is really not
practical for ExecutorEnd to call any user-defined code; so split the
cleanup duties out into a new function ExecutorFinish, which must be called
between the last ExecutorRun call and ExecutorEnd. Some Asserts have been
added to these functions to help verify correct usage.
It is no longer necessary for callers of the executor to call
AfterTriggerBeginQuery/AfterTriggerEndQuery for themselves, as this is now
done by ExecutorStart/ExecutorFinish respectively. If you really need to
suppress that and do it for yourself, pass EXEC_FLAG_SKIP_TRIGGERS to
ExecutorStart.
Also, refactor portal commit processing to allow for the possibility that
PortalDrop will invoke user-defined code. I think this is not actually
necessary just yet, since the portal-execution-strategy logic forces any
non-pure-SELECT query to be run to completion before we will consider
committing. But it seems like good future-proofing.
|
| |
|
|
|
|
| |
We need ExecutorEnd to run the ModifyTable nodes to completion in
reverse order of initialization, not forward order. Easily done
by constructing the list back-to-front.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
|
| |
|
|
|
|
|
| |
This was a leftover from the pre-8.1 design of junkfilters. It doesn't
seem to have any reason to live, since it's merely a combination of two
easy function calls, and not a well-designed combination at that (it
encourages callers to leak the result tuple).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecUpdate checked for whether ExecBRUpdateTriggers had returned a new
tuple value by seeing if the returned tuple was pointer-equal to the old
one. But the "old one" was in estate->es_junkFilter's result slot, which
would be scribbled on if we had done an EvalPlanQual update in response to
a concurrent update of the target tuple; therefore we were comparing a
dangling pointer to a live one. Given the right set of circumstances we
could get a false match, resulting in not forcing the tuple to be stored in
the slot we thought it was stored in. In the case reported by Maxim Boguk
in bug #5798, this led to "cannot extract system attribute from virtual
tuple" failures when trying to do "RETURNING ctid". I believe there is a
very-low-probability chance of more serious errors, such as generating
incorrect index entries based on the original rather than the
trigger-modified version of the row.
In HEAD, change all of ExecBRInsertTriggers, ExecIRInsertTriggers,
ExecBRUpdateTriggers, and ExecIRUpdateTriggers so that they continue to
have similar APIs. In the back branches I just changed
ExecBRUpdateTriggers, since there is no bug in the ExecBRInsertTriggers
case.
|
| |
|
|
|
|
|
| |
This commit provides the core code and documentation needed. A contrib
module test case will follow shortly.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Flattening of subquery range tables during setrefs.c could lead to the
rangetable indexes in PlanRowMark nodes not matching up with the column
names previously assigned to the corresponding resjunk ctid (resp. tableoid
or wholerow) columns. Typical symptom would be either a "cannot extract
system attribute from virtual tuple" error or an Assert failure. This
wasn't a problem before 9.0 because we didn't support FOR UPDATE below the
top query level, and so the final flattening could never renumber an RTE
that was relevant to FOR UPDATE. Fix by using a plan-tree-wide unique
number for each PlanRowMark to label the associated resjunk columns, so
that the number need not change during flattening.
Per report from David Johnston (though I'm darned if I can see how this got
past initial testing of the relevant code). Back-patch to 9.0.
|
| |
|
|
|
|
|
|
| |
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
|
| |
|
|
|
|
| |
maximum allowed' messages, that have reported one-less dimensions.
Alexey Klyukin
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In an inherited UPDATE/DELETE, each target table has its own subplan,
because it might have a column set different from other targets. This
means that the resjunk columns we add to support EvalPlanQual might be
at different physical column numbers in each subplan. The EvalPlanQual
rewrite I did for 9.0 failed to account for this, resulting in possible
misbehavior or even crashes during concurrent updates to the same row,
as seen in a recent report from Gordon Shannon. Revise the data structure
so that we track resjunk column numbers separately for each subplan.
I also chose to move responsibility for identifying the physical column
numbers back to executor startup, instead of assuming that numbers derived
during preprocess_targetlist would stay valid throughout subsequent
massaging of the plan. That's a bit slower, so we might want to consider
undoing it someday; but it would complicate the patch considerably and
didn't seem justifiable in a bug fix that has to be back-patched to 9.0.
|
| |
|
|
|
|
|
|
|
|
|
| |
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
|
| | |
|
| |
|
|
|
| |
There's no reason for these values to be known anywhere else. After
doing this, executor/execdefs.h is vestigial and can be removed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is advantageous first because it allows us to hash the smaller table
regardless of the outer-join type, and second because hash join can be more
flexible than merge join in dealing with arbitrary join quals in a FULL
join. For merge join all the join quals have to be mergejoinable, but hash
join will work so long as there's at least one hashjoinable qual --- the
others can be any condition. (This is true essentially because we don't
keep per-inner-tuple match flags in merge join, while hash join can do so.)
To do this, we need a has-it-been-matched flag for each tuple in the
hashtable, not just one for the current outer tuple. The key idea that
makes this practical is that we can store the match flag in the tuple's
infomask, since there are lots of bits there that are of no interest for a
MinimalTuple. So we aren't increasing the size of the hashtable at all for
the feature.
To write this without turning the hash code into even more of a pile of
spaghetti than it already was, I rewrote ExecHashJoin in a state-machine
style, similar to ExecMergeJoin. Other than that decision, it was pretty
straightforward.
|
| |
|
|
| |
Andreas Karlsson
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
There were corner cases in which the planner would attempt to inline such
a function, which would result in a failure at runtime due to loss of
information about exactly what the result record type is. Fix by disabling
inlining when the function's recorded result type is RECORD. There might
be some sub-cases where inlining could still be allowed, but this is a
simple and backpatchable fix, so leave refinements for another day.
Per bug #5777 from Nate Carson.
Back-patch to all supported branches. 8.1 happens to avoid a core-dump
here, but it still does the wrong thing.
|
