| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, relation range table entries used a single Bitmapset field
representing which columns required either UPDATE or INSERT privileges,
despite the fact that INSERT and UPDATE privileges are separately
cataloged, and may be independently held. As statements so far required
either insert or update privileges but never both, that was
sufficient. The required permission could be inferred from the top level
statement run.
The upcoming INSERT ... ON CONFLICT UPDATE feature needs to
independently check for both privileges in one statement though, so that
is not sufficient anymore.
Bumps catversion as stored rules change.
Author: Peter Geoghegan
Reviewed-By: Andres Freund
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This does four basic things. First, it provides convenience routines
to coordinate the startup and shutdown of parallel workers. Second,
it synchronizes various pieces of state (e.g. GUCs, combo CID
mappings, transaction snapshot) from the parallel group leader to the
worker processes. Third, it prohibits various operations that would
result in unsafe changes to that state while parallelism is active.
Finally, it propagates events that would result in an ErrorResponse,
NoticeResponse, or NotifyResponse message being sent to the client
from the parallel workers back to the master, from which they can then
be sent on to the client.
Robert Haas, Amit Kapila, Noah Misch, Rushabh Lathia, Jeevan Chalke.
Suggestions and review from Andres Freund, Heikki Linnakangas, Noah
Misch, Simon Riggs, Euler Taveira, and Jim Nasby.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The RLS capability is built on top of the WITH CHECK OPTION
system which was added for auto-updatable views, however, unlike
WCOs on views (which are mandated by the SQL spec to not fire until
after all other constraints and checks are done), it makes much more
sense for RLS checks to happen earlier than constraint and uniqueness
checks.
This patch reworks the structure which holds the WCOs a bit to be
explicitly either VIEW or RLS checks and the RLS-related checks are
done prior to the constraint and uniqueness checks. This also allows
better error reporting as we are now reporting when a violation is due
to a WITH CHECK OPTION and when it's due to an RLS policy violation,
which was independently noted by Craig Ringer as being confusing.
The documentation is also updated to include a paragraph about when RLS
WITH CHECK handling is performed, as there have been a number of
questions regarding that and the documentation was previously silent on
the matter.
Author: Dean Rasheed, with some kabitzing and comment changes by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecOpenScanRelation assumed that any relation listed in the ExecRowMark
list has been locked by InitPlan; but this is not true if the rel's
markType is ROW_MARK_COPY, which is possible if it's a foreign table.
In most (possibly all) cases, failure to acquire a lock here isn't really
problematic because the parser, planner, or plancache would have taken the
appropriate lock already. In principle though it might leave us vulnerable
to working with a relation that we hold no lock on, and in any case if the
executor isn't depending on previously-taken locks otherwise then it should
not do so for ROW_MARK_COPY relations.
Noted by Etsuro Fujita. Back-patch to all active versions, since the
inconsistency has been there a long time. (It's almost certainly
irrelevant in 9.0, since that predates foreign tables, but the code's
still wrong on its own terms.)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Foreign tables can now be inheritance children, or parents. Much of the
system was already ready for this, but we had to fix a few things of
course, mostly in the area of planner and executor handling of row locks.
As side effects of this, allow foreign tables to have NOT VALID CHECK
constraints (and hence to accept ALTER ... VALIDATE CONSTRAINT), and to
accept ALTER SET STORAGE and ALTER SET WITH/WITHOUT OIDS. Continuing to
disallow these things would've required bizarre and inconsistent special
cases in inheritance behavior. Since foreign tables don't enforce CHECK
constraints anyway, a NOT VALID one is a complete no-op, but that doesn't
mean we shouldn't allow it. And it's possible that some FDWs might have
use for SET STORAGE or SET WITH OIDS, though doubtless they will be no-ops
for most.
An additional change in support of this is that when a ModifyTable node
has multiple target tables, they will all now be explicitly identified
in EXPLAIN output, for example:
Update on pt1 (cost=0.00..321.05 rows=3541 width=46)
Update on pt1
Foreign Update on ft1
Foreign Update on ft2
Update on child3
-> Seq Scan on pt1 (cost=0.00..0.00 rows=1 width=46)
-> Foreign Scan on ft1 (cost=100.00..148.03 rows=1170 width=46)
-> Foreign Scan on ft2 (cost=100.00..148.03 rows=1170 width=46)
-> Seq Scan on child3 (cost=0.00..25.00 rows=1200 width=46)
This was done mainly to provide an unambiguous place to attach "Remote SQL"
fields, but it is useful for inherited updates even when no foreign tables
are involved.
Shigeru Hanada and Etsuro Fujita, reviewed by Ashutosh Bapat and Kyotaro
Horiguchi, some additional hacking by me
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ROW_MARK_COPY path in EvalPlanQualFetchRowMarks() was just setting
tableoid to InvalidOid, I think on the assumption that the referenced
RTE must be a subquery or other case without a meaningful OID. However,
foreign tables also use this code path, and they do have meaningful
table OIDs; so failure to set the tuple field can lead to user-visible
misbehavior. Fix that by fetching the appropriate OID from the range
table.
There's still an issue about whether CTID can ever have a meaningful
value in this case; at least with postgres_fdw foreign tables, it does.
But that is a different problem that seems to require a significantly
different patch --- it's debatable whether postgres_fdw really wants to
use this code path at all.
Simplified version of a patch by Etsuro Fujita, who also noted the
problem to begin with. The issue can be demonstrated in all versions
having FDWs, so back-patch to 9.1.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If an insertion or update had to wait for another transaction to finish,
because there was another insertion with conflicting key in progress,
we would pass a just-free'd item pointer to XactLockTableWait().
All calls to XactLockTableWait() and MultiXactIdWait() had similar issues.
Some passed a pointer to a buffer in the buffer cache, after already
releasing the lock. The call in EvalPlanQualFetch had already released the
pin too. All but the call in execUtils.c would merely lead to reporting a
bogus ctid, however (or an assertion failure, if enabled).
All the callers that passed HeapTuple->t_data->t_ctid were slightly bogus
anyway: if the tuple was updated (again) in the same transaction, its ctid
field would point to the next tuple in the chain, not the tuple itself.
Backpatch to 9.4, where the 'ctid' argument to XactLockTableWait was added
(in commit f88d4cfc)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
|
| |
|
|
| |
Etsuro Fujita
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up to now, the "child" executor state trees generated for EvalPlanQual
rechecks have simply shared the ResultRelInfo arrays used for the original
execution tree. However, this leads to dangling-pointer problems, because
ExecInitModifyTable() is all too willing to scribble on some fields of the
ResultRelInfo(s) even when it's being run in one of those child trees.
This trashes those fields from the perspective of the parent tree, because
even if the generated subtree is logically identical to what was in use in
the parent, it's in a memory context that will go away when we're done
with the child state tree.
We do however want to share information in the direction from the parent
down to the children; in particular, fields such as es_instrument *must*
be shared or we'll lose the stats arising from execution of the children.
So the simplest fix is to make a copy of the parent's ResultRelInfo array,
but not copy any fields back at end of child execution.
Per report from Manuel Kniep. The added isolation test is based on his
example. In an unpatched memory-clobber-enabled build it will reliably
fail with "ctid is NULL" errors in all branches back to 9.1, as a
consequence of junkfilter->jf_junkAttNo being overwritten with $7f7f.
This test cannot be run as-is before that for lack of WITH syntax; but
I have no doubt that some variant of this problem can arise in older
branches, so apply the code change all the way back.
|
| |
|
|
|
|
| |
Wee -> We.
Pointed out by Etsuro Fujita.
|
| |
|
|
| |
Backpatch certain files through 9.0
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This patch adds a way of iterating through the members of a bitmapset
nondestructively, unlike the old way with bms_first_member(). While
bms_next_member() is very slightly slower than bms_first_member()
(at least for typical-size bitmapsets), eliminating the need to palloc
and pfree a temporary copy of the target bitmapset is a significant win.
So this method should be preferred in all cases where a temporary copy
would be necessary.
Tom Lane, with suggestions from Dean Rasheed and David Rowley
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As pointed out by Robert, we should really have named pg_rowsecurity
pg_policy, as the objects stored in that catalog are policies. This
patch fixes that and updates the column names to start with 'pol' to
match the new catalog name.
The security consideration for COPY with row level security, also
pointed out by Robert, has also been addressed by remembering and
re-checking the OID of the relation initially referenced during COPY
processing, to make sure it hasn't changed under us by the time we
finish planning out the query which has been built.
Robert and Alvaro also commented on missing OCLASS and OBJECT entries
for POLICY (formerly ROWSECURITY or POLICY, depending) in various
places. This patch fixes that too, which also happens to add the
ability to COMMENT on policies.
In passing, attempt to improve the consistency of messages, comments,
and documentation as well. This removes various incarnations of
'row-security', 'row-level security', 'Row-security', etc, in favor
of 'policy', 'row level security' or 'row_security' as appropriate.
Happy Thanksgiving!
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This clause changes the behavior of SELECT locking clauses in the
presence of locked rows: instead of causing a process to block waiting
for the locks held by other processes (or raise an error, with NOWAIT),
SKIP LOCKED makes the new reader skip over such rows. While this is not
appropriate behavior for general purposes, there are some cases in which
it is useful, such as queue-like tables.
Catalog version bumped because this patch changes the representation of
stored rules.
Reviewed by Craig Ringer (based on a previous attempt at an
implementation by Simon Riggs, who also provided input on the syntax
used in the current patch), David Rowley, and Álvaro Herrera.
Author: Thomas Munro
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If SELECT FOR UPDATE NOWAIT tries to lock a tuple that is concurrently
being updated, it might fail to honor its NOWAIT specification and block
instead of raising an error.
Fix by adding a no-wait flag to EvalPlanQualFetch which it can pass down
to heap_lock_tuple; also use it in EvalPlanQualFetch itself to avoid
blocking while waiting for a concurrent transaction.
Authors: Craig Ringer and Thomas Munro, tweaked by Álvaro
http://www.postgresql.org/message-id/51FB6703.9090801@2ndquadrant.com
Per Thomas Munro in the course of his SKIP LOCKED feature submission,
who also provided one of the isolation test specs.
Backpatch to 9.4, because that's as far back as it applies without
conflicts (although the bug goes all the way back). To that branch also
backpatch Thomas Munro's new NOWAIT test cases, committed in master by
Heikki as commit 9ee16b49f0aac819bd4823d9b94485ef608b34e8 .
|
| |
|
|
|
| |
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
|
| |
|
|
|
|
|
|
|
|
| |
We should allow this so that matviews can be referenced in UPDATE/DELETE
statements in READ COMMITTED isolation level. The requirement for that
is that a re-fetch by TID will see the same row version the query saw
earlier, which is true of matviews, so there's no reason for the
restriction. Per bug #9398.
Michael Paquier, after a suggestion by me
|
| |
|
|
|
| |
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ExecBuildSlotValueDescription() printed "null" for each dropped column in
a row being complained of by ExecConstraints(). This has some sanity in
terms of the underlying implementation, but is of course pretty surprising
to users. To fix, we must pass the target relation's descriptor to
ExecBuildSlotValueDescription(), because the slot descriptor it had been
using doesn't get labeled with attisdropped markers.
Per bug #8408 from Maxim Boguk. Back-patch to 9.2 where the feature of
printing row values in NOT NULL and CHECK constraint violation messages
was introduced.
Michael Paquier and Tom Lane
|
| |
|
|
|
|
|
|
|
| |
A subquery reference to a matview should be allowed by CREATE
MATERIALIZED VIEW WITH NO DATA, just like a direct reference is.
Per bug report from Laurent Sartran.
Backpatch to 9.3.
|
| |
|
|
|
| |
Avoid using the term "updatable" in confusing ways. Suggest a trigger
first, before a rule.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
For simple views which are automatically updatable, this patch allows
the user to specify what level of checking should be done on records
being inserted or updated. For 'LOCAL CHECK', new tuples are validated
against the conditionals of the view they are being inserted into, while
for 'CASCADED CHECK' the new tuples are validated against the
conditionals for all views involved (from the top down).
This option is part of the SQL specification.
Dean Rasheed, reviewed by Pavel Stehule
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This allows reads to continue without any blocking while a REFRESH
runs. The new data appears atomically as part of transaction
commit.
Review questioned the Assert that a matview was not a system
relation. This will be addressed separately.
Reviewed by Hitoshi Harada, Robert Haas, Andres Freund.
Merged after review with security patch f3ab5d4.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extend the FDW API (which we already changed for 9.3) so that an FDW can
report whether specific foreign tables are insertable/updatable/deletable.
The default assumption continues to be that they're updatable if the
relevant executor callback function is supplied by the FDW, but finer
granularity is now possible. As a test case, add an "updatable" option to
contrib/postgres_fdw.
This patch also fixes the information_schema views, which previously did
not think that foreign tables were ever updatable, and fixes
view_is_auto_updatable() so that a view on a foreign table can be
auto-updatable.
initdb forced due to changes in information_schema views and the functions
they rely on. This is a bit unfortunate to do post-beta1, but if we don't
change this now then we'll have another API break for FDWs when we do
change it.
Dean Rasheed, somewhat editorialized on by Tom Lane
|
| |
|
|
|
| |
This is the first run of the Perl-based pgindent script. Also update
pgindent instructions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move checking for unscannable matviews into ExecOpenScanRelation, which is
a better place for it first because the open relation is already available
(saving a relcache lookup cycle), and second because this eliminates the
problem of telling the difference between rangetable entries that will or
will not be scanned by the query. In particular we can get rid of the
not-terribly-well-thought-out-or-implemented isResultRel field that the
initial matviews patch added to RangeTblEntry.
Also get rid of entirely unnecessary scannability check in the rewriter,
and a bogus decision about whether RefreshMatViewStmt requires a parse-time
snapshot.
catversion bump due to removal of a RangeTblEntry field, which changes
stored rules.
|
| |
|
|
|
|
| |
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
|
| |
|
|
|
|
|
|
|
|
|
| |
This patch adds the core-system infrastructure needed to support updates
on foreign tables, and extends contrib/postgres_fdw to allow updates
against remote Postgres servers. There's still a great deal of room for
improvement in optimization of remote updates, but at least there's basic
functionality there now.
KaiGai Kohei, reviewed by Alexander Korotkov and Laurenz Albe, and rather
heavily revised by Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A materialized view has a rule just like a view and a heap and
other physical properties like a table. The rule is only used to
populate the table, references in queries refer to the
materialized data.
This is a minimal implementation, but should still be useful in
many cases. Currently data is only populated "on demand" by the
CREATE MATERIALIZED VIEW and REFRESH MATERIALIZED VIEW statements.
It is expected that future releases will add incremental updates
with various timings, and that a more refined concept of defining
what is "fresh" data will be developed. At some point it may even
be possible to have queries use a materialized in place of
references to underlying tables, but that requires the other
above-mentioned features to be working first.
Much of the documentation work by Robert Haas.
Review by Noah Misch, Thom Brown, Robert Haas, Marko Tiikkaja
Security review by KaiGai Kohei, with a decision on how best to
implement sepgsql still pending.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since 9.0, the count parameter has only limited the number of tuples
actually returned by the executor. It doesn't affect the behavior of
INSERT/UPDATE/DELETE unless RETURNING is specified, because without
RETURNING, the ModifyTable plan node doesn't return control to execMain.c
for each tuple. And we only check the limit at the top level.
While this behavioral change was unintentional at the time, discussion of
bug #6572 led us to the conclusion that we prefer the new behavior anyway,
and so we should just adjust the docs to match rather than change the code.
Accordingly, do that. Back-patch as far as 9.0 so that the docs match the
code in each branch.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com
1290721684-sup-3951@alvh.no-ip.org
1294953201-sup-2099@alvh.no-ip.org
1320343602-sup-2290@alvh.no-ip.org
1339690386-sup-8927@alvh.no-ip.org
4FE5FF020200002500048A3D@gw.wicourts.gov
4FEAB90A0200002500048B7D@gw.wicourts.gov
|
| |
|
|
|
| |
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch makes "simple" views automatically updatable, without the need
to create either INSTEAD OF triggers or INSTEAD rules. "Simple" views
are those classified as updatable according to SQL-92 rules. The rewriter
transforms INSERT/UPDATE/DELETE commands on such views directly into an
equivalent command on the underlying table, which will generally have
noticeably better performance than is possible with either triggers or
user-written rules. A view that has INSTEAD OF triggers or INSTEAD rules
continues to operate the same as before.
For the moment, security_barrier views are not considered simple.
Also, we do not support WITH CHECK OPTION. These features may be
added in future.
Dean Rasheed, reviewed by Amit Kapila
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This prevents surprising behavior when a FOR EACH ROW trigger
BEFORE UPDATE or BEFORE DELETE directly or indirectly updates or
deletes the the old row. Prior to this patch the requested action
on the row could be silently ignored while all triggered actions
based on the occurence of the requested action could be committed.
One example of how this could happen is if the BEFORE DELETE
trigger for a "parent" row deleted "children" which had trigger
functions to update summary or status data on the parent.
This also prevents similar surprising problems if the query has a
volatile function which updates a target row while it is already
being updated.
There are related issues present in FOR UPDATE cursors and READ
COMMITTED queries which are not handled by this patch. These
issues need further evalution to determine what change, if any, is
needed.
Where the new error messages are generated, in most cases the best
fix will be to move code from the BEFORE trigger to an AFTER
trigger. Where this is not feasible, the trigger can avoid the
error by re-issuing the triggering statement and returning NULL.
Documentation changes will be submitted in a separate patch.
Kevin Grittner and Tom Lane with input from Florian Pflug and
Robert Haas, based on problems encountered during conversion of
Wisconsin Circuit Court trigger logic to plpgsql triggers.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
|
| |
|
|
| |
commit-fest.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Making this operation look like a utility statement seems generally a good
idea, and particularly so in light of the desire to provide command
triggers for utility statements. The original choice of representing it as
SELECT with an IntoClause appendage had metastasized into rather a lot of
places, unfortunately, so that this patch is a great deal more complicated
than one might at first expect.
In particular, keeping EXPLAIN working for SELECT INTO and CREATE TABLE AS
subcommands required restructuring some EXPLAIN-related APIs. Add-on code
that calls ExplainOnePlan or ExplainOneUtility, or uses
ExplainOneQuery_hook, will need adjustment.
Also, the cases PREPARE ... SELECT INTO and CREATE RULE ... SELECT INTO,
which formerly were accepted though undocumented, are no longer accepted.
The PREPARE case can be replaced with use of CREATE TABLE AS EXECUTE.
The CREATE RULE case doesn't seem to have much real-world use (since the
rule would work only once before failing with "table already exists"),
so we'll not bother with that one.
Both SELECT INTO and CREATE TABLE AS still return a command tag of
"SELECT nnnn". There was some discussion of returning "CREATE TABLE nnnn",
but for the moment backwards compatibility wins the day.
Andres Freund and Tom Lane
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We can't just skip initializing such subplans, because the referencing CTE
node will expect to find the subplan available when it initializes. That
in turn means that ExecInitModifyTable must allow the case (which actually
it needed to do anyway, since there's no guarantee that ModifyTable is
exactly at the top of the CTE plan tree). So move the complaint about not
being allowed in EvalPlanQual mode to execution instead of initialization.
Testing turned up yet another problem, which is that we'd try to
re-initialize the result relation's index list, leading to leaks and
dangling pointers.
Per report from Phil Sorber. Back-patch to 9.1 where data-modifying CTEs
were introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the previous coding, it was possible for a relation to be created
via CREATE TABLE, CREATE VIEW, CREATE SEQUENCE, CREATE FOREIGN TABLE,
etc. in a schema while that schema was meanwhile being concurrently
dropped. This led to a pg_class entry with an invalid relnamespace
value. The same problem could occur if a relation was moved using
ALTER .. SET SCHEMA while the target schema was being concurrently
dropped. This patch prevents both of those scenarios by locking the
schema to which the relation is being added using AccessShareLock,
which conflicts with the AccessExclusiveLock taken by DROP.
As a desirable side effect, this also prevents the use of CREATE OR
REPLACE VIEW to queue for an AccessExclusiveLock on a relation on which
you have no rights: that will now fail immediately with a permissions
error, before trying to obtain a lock.
We need similar protection for all other object types, but as everything
other than relations uses a slightly different set of code paths, I'm
leaving that for a separate commit.
Original complaint (as far as I could find) about CREATE by Nikhil
Sontakke; risk for ALTER .. SET SCHEMA pointed out by Tom Lane;
further details by Dan Farina; patch by me; review by Hitoshi Harada.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
As previously coded, the QueryDesc's dest pointer was left dangling
(pointing at an already-freed receiver object) after ExecutorEnd. It's a
bit astonishing that it took us this long to notice, and I'm not sure that
the known problem case with SQL functions is the only one. Fix it by
saving and restoring the original receiver pointer, which seems the most
bulletproof way of ensuring any related bugs are also covered.
Per bug #6379 from Paul Ramsey. Back-patch to 8.4 where the current
handling of SELECT INTO was introduced.
|
| | |
|
| |
|
|
|
|
|
|
|
| |
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
|
| |
|
|
| |
Simple extension of previous patch for CHECK constraints.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This should make it easier to identify which row is problematic when an
insert or update is processing many rows.
The formatting is similar to that for unique-index violation messages,
except that we limit field widths to 64 bytes since otherwise the message
could get unreasonably long. (In particular, there's currently no attempt
to quote or escape field values that contain commas etc.)
Jan Kundrát, reviewed by Royce Ausburn, somewhat rewritten by me.
|
| |
|
|
|
|
|
|
|
|
|
| |
The WITH [NO] DATA option was not supported, nor the ability to specify
replacement column names; the former limitation wasn't even documented, as
per recent complaint from Naoya Anzai. Fix by moving the responsibility
for supporting these options into the executor. It actually takes less
code this way ...
catversion bump due to change in representation of IntoClause, which might
affect stored rules.
|
