| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When BUFFERS option is enabled, EXPLAIN command includes the information
on buffer usage during each plan node, in its output. In addition to that,
this commit makes EXPLAIN command include also the information on
buffer usage during planning phase, in its output. This feature makes it
easier to discern the cases where lots of buffer access happen during
planning.
Author: Julien Rouhaud, slightly revised by Fujii Masao
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/16109-26a1a88651e90608@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds query_string argument into the planner-related functions
and hook and allows us to pass the query string to them.
Currently there is no user of the query string passed. But the upcoming patch
for the planning counters will add the planning hook function into
pg_stat_statements and the function will need the query string. So this change
will be necessary for that patch.
Also this change is useful for some extensions that want to use the query
string in their planner hook function.
Author: Pascal Legrand, Julien Rouhaud
Reviewed-by: Yoshikazu Imai, Tom Lane, Fujii Masao
Discussion: https://postgr.es/m/CAOBaU_bU1m3_XF5qKYtSj1ua4dxd=FWDyh2SH4rSJAUUfsGmAQ@mail.gmail.com
Discussion: https://postgr.es/m/1583789487074-0.post@n3.nabble.com
|
| |
|
|
|
|
|
|
|
| |
Justin Pryzby raised a couple issues with commit 1f39bce0. Fixed.
Also, tweak the way the size of a hash entry is estimated and the
number of buckets is estimated when calling BuildTupleHashTableExt().
Discussion: https://www.postgresql.org/message-id/20200319064222.GR26184@telsasoft.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While performing hash aggregation, track memory usage when adding new
groups to a hash table. If the memory usage exceeds work_mem, enter
"spill mode".
In spill mode, new groups are not created in the hash table(s), but
existing groups continue to be advanced if input tuples match. Tuples
that would cause a new group to be created are instead spilled to a
logical tape to be processed later.
The tuples are spilled in a partitioned fashion. When all tuples from
the outer plan are processed (either by advancing the group or
spilling the tuple), finalize and emit the groups from the hash
table. Then, create new batches of work from the spilled partitions,
and select one of the saved batches and process it (possibly spilling
recursively).
Author: Jeff Davis
Reviewed-by: Tomas Vondra, Adam Lee, Justin Pryzby, Taylor Vesely, Melanie Plageman
Discussion: https://postgr.es/m/507ac540ec7c20136364b5272acbcd4574aa76ef.camel@j-davis.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 499be013d added this field in a rather poorly-thought-through
manner, with the result being that rather than being a field of the
Append or MergeAppend plan node as intended (and as it seems to be,
in text format), it was actually an element of the "Plans" subgroup.
At least in JSON format, that's flat out invalid syntax, because
"Plans" is an array not an object.
While it's not hard to move the generation of the field so that it
appears where it's supposed to, this does result in a visible change
in field order in text format, in cases where a Append or MergeAppend
plan node has any InitPlans attached. That's slightly annoying to
do in stable branches; but the alternative of continuing to emit
broken non-text formats seems worse.
Also, since the set of fields emitted is not supposed to be
data-dependent in non-text formats, make sure that "Subplans Removed"
appears in Append and MergeAppend nodes even when it's zero, in those
formats. (The previous coding made it look like it could appear in
some other node types such as BitmapAnd, but we don't actually support
runtime pruning there, so don't emit it in those cases.)
Per bug #16171 from Mahadevan Ramachandran. Fix by Daniel Gustafsson
and Tom Lane, reviewed by Hamid Akhtar. Back-patch to v11 where this
code came in.
Discussion: https://postgr.es/m/16171-b72259ab75505fa2@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In non-TEXT output formats, the "Settings" field should appear when
requested, even if it would be empty.
Also, get rid of the premature optimization of counting all the
GUC_EXPLAIN variables at startup. Since there was no provision for
adjusting that count later, all it'd take would be some extension marking
a parameter as GUC_EXPLAIN to risk an assertion failure or memory stomp.
We could make get_explain_guc_options() count those variables on-the-fly,
or dynamically resize its array ... but TBH I do not think that making a
transient array of pointers a bit smaller is worth any extra complication,
especially when you consider all the other transient space EXPLAIN eats.
So just allocate that array at the max possible size.
In HEAD, also add some regression test coverage for this feature.
Because of the memory-stomp hazard, back-patch to v12 where this
feature was added.
Discussion: https://postgr.es/m/19416.1580069629@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, it was possible for EXPLAIN ANALYZE of a parallel query
to produce several different "Workers" fields for a single plan node,
because different portions of explain.c independently generated
per-worker data and wrapped that output in separate fields. This
is pretty bogus, especially for the structured output formats: even
if it's not technically illegal, most programs would have a hard time
dealing with such data.
To improve matters, add infrastructure that allows redirecting
per-worker values into a side data structure, and then collect that
data into a single "Workers" field after we've finished running all
the relevant code for a given plan node.
There are a few visible side-effects:
* In text format, instead of something like
Sort Method: external merge Disk: 4920kB
Worker 0: Sort Method: external merge Disk: 5880kB
Worker 1: Sort Method: external merge Disk: 5920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Buffers: shared hit=345 read=3507, temp read=505 written=744
you get
Sort Method: external merge Disk: 4920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Sort Method: external merge Disk: 5880kB
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Sort Method: external merge Disk: 5920kB
Buffers: shared hit=345 read=3507, temp read=505 written=744
* When JIT is enabled, any relevant per-worker JIT stats are attached
to the child node of the Gather or Gather Merge node, which is where
the other per-worker output has always been. Previously, that info
was attached directly to a Gather node, or missed entirely for Gather
Merge.
* A query's summary JIT data no longer includes a bogus
"Worker Number: -1" field.
A notable code-level change is that indenting for lines of text-format
output should now be handled by calling "ExplainIndentText(es)",
instead of hard-wiring how much space to emit. This seems a good deal
cleaner anyway.
This patch also adds a new "explain.sql" regression test script that's
dedicated to testing EXPLAIN. There is more that can be done in that
line, certainly, but for now it just adds some coverage of the XML and
YAML output formats, which had been completely untested.
Although this is surely a bug fix, it's not clear that people would
be happy with rearranging EXPLAIN output in a minor release, so apply
to HEAD only.
Maciek Sakrejda and Tom Lane, based on an idea of Andres Freund's;
reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/CAOtHd0AvAA8CLB9Xz0wnxu1U=zJCKrr1r4QwwXi_kcQsHDVU=Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Pass ParseState into the functions called from
standard_ProcessUtility() instead passing the query string and query
environment separately. No functionality change, but it makes the
notation consistent. We had already started moving things into
that direction piece by piece, and this completes it.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6e7aa4a1-be6a-1a75-b1f9-83a678e5184a@2ndquadrant.com
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
force_parallel_mode = regress is supposed to force use of a Gather
node without having any impact on EXPLAIN output. But it failed to
accomplish that if both ANALYZE and VERBOSE are given, because that
enables per-worker output data that you wouldn't see if the Gather
hadn't been inserted. Improve the logic so that we suppress the
per-worker data too.
This allows putting the new test case added by commit 5935917ce
back into the originally intended form (cf. 776a2c887, 22864f6e0).
We can also get rid of a kluge in subselect.sql, which previously
had to clean up after force_parallel_mode's failure to do what it
said on the tin.
Discussion: https://postgr.es/m/18445.1576177309@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Query planning is affected by a number of configuration options, and it
may be crucial to know which of those options were set to non-default
values. With this patch you can say EXPLAIN (SETTINGS ON) to include
that information in the query plan. Only options affecting planning,
with values different from the built-in default are printed.
This patch also adds auto_explain.log_settings option, providing the
same capability in auto_explain module.
Author: Tomas Vondra
Reviewed-by: Rafia Sabih, John Naylor
Discussion: https://postgr.es/m/e1791b4c-df9c-be02-edc5-7c8874944be0@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move a few very simple node-creation and node-type-testing functions
from the planner's clauses.c to nodes/makefuncs and nodes/nodeFuncs.
There's nothing planner-specific about them, as evidenced by the
number of other places that were using them.
While at it, rename and_clause() etc to is_andclause() etc, to clarify
that they are node-type-testing functions not node-creation functions.
And use "static inline" implementations for the shortest ones.
Also, modify flatten_join_alias_vars() and some subsidiary functions
to take a Query not a PlannerInfo to define the join structure that
Vars should be translated according to. They were only using the
"parse" field of the PlannerInfo anyway, so this just requires removing
one level of indirection. The advantage is that now parse_agg.c can
use flatten_join_alias_vars() without the horrid kluge of creating an
incomplete PlannerInfo, which will allow that file to be decoupled from
relation.h in a subsequent patch.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "name" comparison operators now all support collations, making them
functionally equivalent to "text" comparisons, except for the different
physical representation of the datatype. They do, in fact, mostly share
the varstr_cmp and varstr_sortsupport infrastructure, which has been
slightly enlarged to handle the case.
To avoid changes in the default behavior of the datatype, set name's
typcollation to C_COLLATION_OID not DEFAULT_COLLATION_OID, so that
by default comparisons to a name value will continue to use strcmp
semantics. (This would have been the case for system catalog columns
anyway, because of commit 6b0faf723, but doing this makes it true for
user-created name columns as well. In particular, this avoids
locale-dependent changes in our regression test results.)
In consequence, tweak a couple of places that made assumptions about
collatable base types always having typcollation DEFAULT_COLLATION_OID.
I have not, however, attempted to relax the restriction that user-
defined collatable types must have that. Hence, "name" doesn't
behave quite like a user-defined type; it acts more like a domain
with COLLATE "C". (Conceivably, if we ever get rid of the need for
catalog name columns to be fixed-length, "name" could actually become
such a domain over text. But that'd be a pretty massive undertaking,
and I'm not volunteering.)
Discussion: https://postgr.es/m/15938.1544377821@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Upcoming work intends to allow pluggable ways to introduce new ways of
storing table data. Accessing those table access methods from the
executor requires TupleTableSlots to be carry tuples in the native
format of such storage methods; otherwise there'll be a significant
conversion overhead.
Different access methods will require different data to store tuples
efficiently (just like virtual, minimal, heap already require fields
in TupleTableSlot). To allow that without requiring additional pointer
indirections, we want to have different structs (embedding
TupleTableSlot) for different types of slots. Thus different types of
slots are needed, which requires adapting creators of slots.
The slot that most efficiently can represent a type of tuple in an
executor node will often depend on the type of slot a child node
uses. Therefore we need to track the type of slot is returned by
nodes, so parent slots can create slots based on that.
Relatedly, JIT compilation of tuple deforming needs to know which type
of slot a certain expression refers to, so it can create an
appropriate deforming function for the type of tuple in the slot.
But not all nodes will only return one type of slot, e.g. an append
node will potentially return different types of slots for each of its
subplans.
Therefore add function that allows to query the type of a node's
result slot, and whether it'll always be the same type (whether it's
fixed). This can be queried using ExecGetResultSlotOps().
The scan, result, inner, outer type of slots are automatically
inferred from ExecInitScanTupleSlot(), ExecInitResultSlot(),
left/right subtrees respectively. If that's not correct for a node,
that can be overwritten using new fields in PlanState.
This commit does not introduce the actually abstracted implementation
of different kind of TupleTableSlots, that will be left for a followup
commit. The different types of slots introduced will, for now, still
use the same backing implementation.
While this already partially invalidates the big comment in
tuptable.h, it seems to make more sense to update it later, when the
different TupleTableSlot implementations actually exist.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I (Andres) was more than a bit hasty in committing 33001fd7a7072d48327
after last minute changes, leading to a number of problems (jit output
was only shown for JIT in parallel workers, and just EXPLAIN without
ANALYZE didn't work). Lukas luckily found these issues quickly.
Instead of combining instrumentation in in standard_ExecutorEnd(), do
so on demand in the new ExplainPrintJITSummary().
Also update a documentation example of the JIT output, changed in
52050ad8ebec8d831.
Author: Lukas Fittl, with minor changes by me
Discussion: https://postgr.es/m/CAP53PkxmgJht69pabxBXJBM+0oc6kf3KHMborLP7H2ouJ0CCtQ@mail.gmail.com
Backpatch: 11, where JIT compilation was introduced
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, when using parallel query, EXPLAIN (ANALYZE)'s JIT
compilation timings did not include the overhead from doing so on the
workers. Fix that.
We do so by simply aggregating the cost of doing JIT compilation on
workers and the leader together. Arguably that's not quite accurate,
because the total time spend doing so is spent in parallel - but it's
hard to do much better. For additional detail, when VERBOSE is
specified, the stats for workers are displayed separately.
Author: Amit Khandekar and Andres Freund
Discussion: https://postgr.es/m/CAJ3gD9eLrz51RK_gTkod+71iDcjpB_N8eC6vU2AW-VicsAERpQ@mail.gmail.com
Backpatch: 11-
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A discussion about also reporting JIT compilation overhead on workers
brought unhappiness with the verbosity of the current explain format
to light. Make the text format more dense, and restructure the
structured output to mirror that more closely.
As we're re-jiggering the output format anyway: The denser format
allows us to report all flags for JIT compilation (now also reporting
PGJIT_EXPR and PGJIT_DEFORM), and report the total time in addition to
the individual times.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/27812.1537221015@sss.pgh.pa.us
Backpatch: 11-, where JIT compilation was introduced
|
| |
|
|
|
|
|
|
| |
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commits d204ef63776b8a00ca220adec23979091564e465,
83454e3c2b28141c0db01c7d2027e01040df5249 and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The HeapFetches counter was using a simple value in IndexOnlyScanState,
which fails to propagate values from parallel workers; so the counts are
wrong when IndexOnlyScan runs in parallel. Move it to Instrumentation,
like all the other counters.
While at it, change INSERT ON CONFLICT conflicting tuple counter to use
the new ntuples2 instead of nfiltered2, which is a blatant misuse.
Discussion: https://postgr.es/m/20180409215851.idwc75ct2bzi6tea@alvherre.pgsql
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
|
| |
|
|
| |
This reverts commit 354f13855e6381d288dfaa52bcd4f2cb0fd4a5eb.
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
This just shows a few details about JITing, e.g. how many functions
have been JITed, and how long that took. To avoid noise in regression
tests with functions sometimes being JITed in --with-llvm builds,
disable display when COSTS OFF is specified.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
This allows to deduplicate some existing code, but mainly avoids some
duplication in upcoming commits.
In passing, fix variable names indicating wrong unit (seconds instead
of ms).
Author: Andres Freund
Discussion: https://postgr.es/m/20180314002740.cah3mdsonz5mxney@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
| |
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in
6275f5d28a1577563f53f2171689d4f890a46881, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
| |
|
|
|
|
|
|
| |
Doing so causes EXPLAIN ANALYZE to show trigger statistics multiple
times. Commit 2f178441044be430f6b4d626e4dae68a9a6f6cec seems to
be to blame for this.
Amit Langote, revieed by Amit Khandekar, Etsuro Fujita, and me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This should have been done in commit 18ce3a4ab, which added that parameter
to ExplainOneQuery, but it was overlooked. This makes it impossible for
a user of the hook to pass the queryEnv down to ExplainOnePlan.
It's too late to change this API in v10, I suppose, but fortunately
passing NULL to ExplainOnePlan will work in nearly all interesting
cases in v10. That might not be true forever, so we'd better fix it.
Tatsuro Yamada, reviewed by Thomas Munro
Discussion: https://postgr.es/m/890e8dd9-c1c7-a422-6892-874f5eaee048@lab.ntt.co.jp
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a race case, EXPLAIN ANALYZE could fail to display correct nbatch
and size information. Refactor so that participants report only on
batches they worked on rather than trying to report on all of them,
and teach explain.c to consider the HashInstrumentation object from
all participants instead of picking the first one it can find. This
should fix an occasional build farm failure in the "join" regression
test.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/30219.1514428346%40sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a hash join appears in a parallel query, there may be no hash table
available for explain.c to inspect even though a hash table may have
been built in other processes. This could happen either because
parallel_leader_participation was set to off or because the leader
happened to hit the end of the outer relation immediately (even though
the complete relation is not empty) and decided not to build the hash
table.
Commit bf11e7ee introduced a way for workers to exchange
instrumentation via the DSM segment for Sort nodes even though they
are not parallel-aware. This commit does the same for Hash nodes, so
that explain.c has a way to find instrumentation data from an
arbitrary participant that actually built the hash table.
Author: Thomas Munro
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D3DUQC2-z252N55eOcZBer6DPdM%3DFzrxH9dZc5vYLsjaA%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a PARAM_EXEC parameter is used below a Gather (Merge) but the InitPlan
that computes it is attached to or above the Gather (Merge), force the
value to be computed before starting parallelism and pass it down to all
workers. This allows us to use parallelism in cases where it previously
would have had to be rejected as unsafe. We do - in this case - lose the
optimization that the value is only computed if it's actually used. An
alternative strategy would be to have the first worker that needs the value
compute it, but one downside of that approach is that we'd then need to
select a parallel-safe path to compute the parameter value; it couldn't for
example contain a Gather (Merge) node. At some point in the future, we
might want to consider both approaches.
Independent of that consideration, there is a great deal more work that
could be done to make more kinds of PARAM_EXEC parameters parallel-safe.
This infrastructure could be used to allow a Gather (Merge) on the inner
side of a nested loop (although that's not a very appealing plan) and
cases where the InitPlan is attached below the Gather (Merge) could be
addressed as well using various techniques. But this is a good start.
Amit Kapila, reviewed and revised by me. Reviewing and testing from
Kuntal Ghosh, Haribabu Kommi, and Tushar Ahuja.
Discussion: http://postgr.es/m/CAA4eK1LV0Y1AUV4cUCdC+sYOx0Z0-8NAJ2Pd9=UKsbQ5Sr7+JQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Haribabu Kommi, reviewed by Dilip Kumar and Rafia Sabih. Various
cosmetic changes by me to explain why this appears to be safe but
allowing inserts in parallel mode in general wouldn't be. Also, I
removed the REFRESH MATERIALIZED VIEW case from Haribabu's patch,
since I'm not convinced that case is OK, and hacked on the
documentation somewhat.
Discussion: http://postgr.es/m/CAJrrPGdo5bak6qnPWe8Kpi8g_jfQEs-G4SYmG9y+OFaw2-dPvA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Extensions with custom plan nodes might like to use these in their
EXPLAIN output.
Hadi Moshayedi
Discussion: https://postgr.es/m/CA+_kT_dU-rHCN0u6pjA6bN5CZniMfD=-wVqPY4QLrKUY_uJq5w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up until now, when parallel query was used, no details about the
sort method or space used by the workers were available; details
were shown only for any sorting done by the leader. Fix that.
Commit 1177ab1dabf72bafee8f19d904cee3a299f25892 forced the test case
added by commit 1f6d515a67ec98194c23a5db25660856c9aab944 to run
without parallelism; now that we have this infrastructure, allow
that again, with a little tweaking to make it pass with and without
force_parallel_mode.
Robert Haas and Tom Lane
Discussion: http://postgr.es/m/CA+Tgmoa2VBZW6S8AAXfhpHczb=Rf6RqQ2br+zJvEgwJ0uoD_tQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Add a new EState member es_leaf_result_relations, so that the trigger
code knows about ResultRelInfos created by tuple routing. Also make
sure ExplainPrintTriggers knows about partition-related
ResultRelInfos.
Etsuro Fujita, reviewed by Amit Langote
Discussion: http://postgr.es/m/57163e18-8e56-da83-337a-22f2c0008051@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If there can certainly be no more than one matching inner row for a given
outer row, then the executor can move on to the next outer row as soon as
it's found one match; there's no need to continue scanning the inner
relation for this outer row. This saves useless scanning in nestloop
and hash joins. In merge joins, it offers the opportunity to skip
mark/restore processing, because we know we have not advanced past the
first possible match for the next outer row.
Of course, the devil is in the details: the proof of uniqueness must
depend only on joinquals (not otherquals), and if we want to skip
mergejoin mark/restore then it must depend only on merge clauses.
To avoid adding more planning overhead than absolutely necessary,
the present patch errs in the conservative direction: there are cases
where inner_unique or skip_mark_restore processing could be used, but
it will not do so because it's not sure that the uniqueness proof
depended only on "safe" clauses. This could be improved later.
David Rowley, reviewed and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CAApHDvqF6Sw-TK98bW48TdtFJ+3a7D2mFyZ7++=D-RyPsL76gw@mail.gmail.com
|
