| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
|
| |
|
|
| |
Author: Shao Bret
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
| |
|
|
|
| |
This affects mostly code comments, some documentation, and tests.
Official APIs already used "standby".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
| |
perltidy run not included.
|
| |
|
|
|
|
|
|
|
| |
If file was created/deleted just before powerloss it's possible that
file system will miss that. To prevent it, call fsync() where creating/
unlinkg file is critical.
Author: Michael Paquier
Reviewed-by: Ashutosh Bapat, Takayuki Tsunakawa, me
|
| |
|
|
|
|
|
|
|
|
|
| |
Names containing the letters "log" sometimes confuse users into
believing that only non-critical data is present. It is hoped
this renaming will discourage ill-considered removals of transaction
status data.
Michael Paquier
Discussion: http://postgr.es/m/CA+Tgmoa9xFQyjRZupbdEFuwUerFTvC6HjZq1ud6GYragGDFFgA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Backpatch to all supported versions, where applicable, to make backpatching
of future fixes go more smoothly.
Josh Soref
Discussion: https://www.postgresql.org/message-id/CACZqfqCf+5qRztLPgmmosr-B0Ye4srWzzw_mo4c_8_B_mtjmJQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a user requests the commit timestamp for a transaction old enough
that its data is concurrently being truncated away by vacuum at just the
right time, they would receive an ugly internal file-not-found error
message from slru.c rather than the expected NULL return value.
In a primary server, the window for the race is very small: the lookup
has to occur exactly between the two calls by vacuum, and there's not a
lot that happens between them (mostly just a multixact truncate). In a
standby server, however, the window is larger because the truncation is
executed as soon as the WAL record for it is replayed, but the advance
of the oldest-Xid is not executed until the next checkpoint record.
To fix in the primary, simply reverse the order of operations in
vac_truncate_clog. To fix in the standby, augment the WAL truncation
record so that the standby is aware of the new oldest-XID value and can
apply the update immediately. WAL version bumped because of this.
No backpatch, because of the low importance of the bug and its rarity.
Author: Craig Ringer
Reviewed-By: Petr Jelínek, Peter Eisentraut
Discussion: https://postgr.es/m/CAMsr+YFhVtRQT1VAwC+WGbbxZZRzNou=N9Ed-FrCqkwQ8H8oJQ@mail.gmail.com
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
|
| |
|
|
|
|
|
|
|
| |
lockdefs.h was only split from lock.h relatively recently, and
represents a minimal subset of the old lock.h. heapam.h only needs
that smaller subset, so adjust it to include only that. This requires
some corresponding adjustments elsewhere.
Peter Geoghegan
|
| | |
|
| |
|
|
|
|
|
| |
This makes the values more stable, which seems like a good thing for
anybody who needs to look at at them.
Alexander Korotkov and Amit Kapila
|
| |
|
|
| |
Backpatch certain files through 9.1
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The variables newestCommitTs and oldestCommitTs sound as if they are
timestamps, but in fact they are the transaction Ids that correspond
to the newest and oldest timestamps rather than the actual timestamps.
Rename these variables to reflect that they are actually xids: to wit
newestCommitTsXid and oldestCommitTsXid respectively. Also modify
related code in a similar fashion, particularly the user facing output
emitted by pg_controldata and pg_resetxlog.
Complaint and patch by me, review by Tom Lane and Alvaro Herrera.
Backpatch to 9.5 where these variables were first introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This module needs explicit initialization in order to replay WAL records
in recovery, but we had broken this recently following changes to make
other (stranger) scenarios work correctly. To fix, rework the
initialization sequence so that it always takes place before WAL replay
commences for both master and standby.
I could have gone for a more localized fix that just added a "startup"
call for the master server, but it seemed better to restructure the
existing callers as well so that the whole thing made more sense. As a
drawback, there is more control logic in xlog.c now than previously, but
doing otherwise meant passing down the ControlFile flag, which seemed
uglier as a whole.
This also meant adding a check to not re-execute ActivateCommitTs if it
had already been called.
Reported by Fujii Masao.
Backpatch to 9.5.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As pointed out by Fujii Masao, we weren't quite there on a standby
behaving sanely: first because we were failing to acquire the correct
state in the case where no XLOG_PARAMETER_CHANGE message was sent
(because a checkpoint had already happened after the setting was changed
in the master, and then the standby was restarted); and second because
promoting the standby with the feature enabled failed to activate it if
the master had the feature disabled.
This patch fixes both those misbehaviors hopefully without
re-introducing any old problems.
Also change the hint emitted in a standby together with the error
message about the feature being disabled, to make it point out that the
place to chance the setting is the master. Otherwise, if the setting is
already enabled in the standby, it is very confusing to have it say that
the setting must be enabled ...
Authors: Álvaro Herrera, Petr Jelínek.
Backpatch to 9.5.
|
| |
|
|
|
|
|
|
|
|
| |
This makes it significantly easier to identify these lwlocks in
LWLOCK_STATS or Trace_lwlocks output. It's also arguably better
from a modularity standpoint, since lwlock.c no longer needs to
know anything about the LWLock needs of the higher-level SLRU
facility.
Ildus Kurbangaliev, reviewd by Álvaro Herrera and by me.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Further tweak commit_ts.c so that on a standby the state is completely
consistent with what that in the master, rather than behaving
differently in the cases that the settings differ. Now in standby and
master the module should always be active or inactive in lockstep.
Author: Petr Jelínek, with some further tweaks by Álvaro Herrera.
Backpatch to 9.5, where commit timestamps were introduced.
Discussion: http://www.postgresql.org/message-id/5622BF9D.2010409@2ndquadrant.com
|
| |
|
|
| |
Bug noticed by Fujii Masao
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Module initialization was still not completely correct after commit
6b61955135e9, per crash report from Takashi Ohnishi. To fix, instead of
trying to monkey around with the value of the GUC setting directly, add
a separate boolean flag that enables the feature on a standby, but only
for the startup (recovery) process, when it sees that its master server
has the feature enabled.
Discussion: http://www.postgresql.org/message-id/ca44c6c7f9314868bdc521aea4f77cbf@MP-MSGSS-MBX004.msg.nttdata.co.jp
Also change the deactivation routine to delete all segment files rather
than leaving the last one around. (This doesn't need separate
WAL-logging, because on recovery we execute the same deactivation
routine anyway.)
In passing, clean up the code structure somewhat, particularly so that
xlog.c doesn't know so much about when to activate/deactivate the
feature.
Thanks to Fujii Masao for testing and Petr Jelínek for off-list discussion.
Back-patch to 9.5, where commit_ts was introduced.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are three main changes here:
1. No longer cause a start failure in a standby if the feature is
disabled in postgresql.conf but enabled in the master. This reverts one
part of commit 4f3924d9cd43; what we keep is the ability of the standby
to activate/deactivate the module (which includes creating and removing
segments as appropriate) during replay of such actions in the master.
2. Replay WAL records affecting commitTS even if the feature is
disabled. This means the standby will always have the same state as the
master after replay.
3. Have COMMIT PREPARE record the transaction commit time as well. We
were previously only applying it in the normal transaction commit path.
Author: Petr Jelínek
Discussion: http://www.postgresql.org/message-id/CAHGQGwHereDzzzmfxEBYcVQu3oZv6vZcgu1TPeERWbDc+gQ06g@mail.gmail.com
Discussion: http://www.postgresql.org/message-id/CAHGQGwFuzfO4JscM9LCAmCDCxp_MfLvN4QdB+xWsS-FijbjTYQ@mail.gmail.com
Additionally, I cleaned up nearby code related to replication origins,
which I found a bit hard to follow, and fixed a couple of typos.
Backpatch to 9.5, where this code was introduced.
Per bug reports from Fujii Masao and subsequent discussion.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The code had bugs that would cause crashes if NULL was passed as that
argument (originally intended to mean not to bother returning its
value), and after inspection it turns out that nothing seems interested
in the case that *ts is NULL anyway. Therefore, remove the partial
checks intended to support that case.
Author: Michael Paquier
though I didn't include a proposed Assert.
Backpatch to 9.5.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We allow this module to be turned off on restarts, so a restart time
check is enough to activate or deactivate the module; however, if there
is a standby replaying WAL emitted from a master which is restarted, but
the standby isn't, the state in the standby becomes inconsistent and can
easily be crashed.
Fix by activating and deactivating the module during WAL replay on
parameter change as well as on system start.
Problem reported by Fujii Masao in
http://www.postgresql.org/message-id/CAHGQGwFhJ3CnHo1CELEfay18yg_RA-XZT-7D8NuWUoYSZ90r4Q@mail.gmail.com
Author: Petr Jelínek
|
| |
|
|
| |
Backpatch certain files through 9.0
|
|
|
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
|
