| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
|
|
|
|
|
| |
postgres_fdw does not support two-phase transactions, so let's add a
small negative test case to check after it. Note that this is checked
using an end-of-xact callback to ensure a proper connection cleanup with
the foreign server, which is called before checking if a server is able
to handle 2PC with max_prepared_xacts, so this test does not need an
alternate output file.
Author: Gilles Darold
Discussion: https://postgr.es/m/20191108090507.GC1768@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
| |
This addresses more issues with code comments, variable names and
unreferenced variables.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/7ab243e0-116d-3e44-d120-76b3df7abefd@gmail.com
|
| |
|
|
|
|
|
|
|
|
| |
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
Previously, in the loop in postgresAcquireSampleRowsFunc() to iterate
fetching rows from a given remote table, we redundantly 1) determined the
fetch size by parsing the table's server/table-level options and then 2)
constructed the fetch command; remove that redundancy.
Author: Etsuro Fujita
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK17_urk9qkLV65_iYMFw64z5qhdfhY=tMVV6Jg4KNYx8+w@mail.gmail.com
|
| |
|
|
|
| |
pgperltidy and reformat-dat-files too, though the latter didn't
find anything to change.
|
| |
|
|
|
| |
Author: Alexander Lakhin
Discussion: https://postgr.es/m/af27d1b3-a128-9d62-46e0-88f424397f44@gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit aa09cd242 modified estimate_path_cost_size() so that it reuses
cached costs of a basic foreign path for a given foreign-base/join
relation when costing pre-sorted foreign paths for that relation, but it
incorrectly re-computed retrieved_rows, an estimated number of rows
fetched from the remote side, which is needed for costing both the basic
and pre-sorted foreign paths. To fix, handle retrieved_rows the same way
as the cached costs: store in that relation's fpinfo the retrieved_rows
estimate computed for costing the basic foreign path, and reuse it when
costing the pre-sorted foreign paths. Also, reuse the rows/width
estimates stored in that relation's fpinfo when costing the pre-sorted
foreign paths, to make the code consistent.
In commit ffab494a4, to extend the costing mentioned above to the
foreign-grouping case, I made a change to add_foreign_grouping_paths() to
store in a given foreign-grouped relation's RelOptInfo the rows estimate
for that relation for reuse, but this patch makes that change unnecessary
since we already store the row estimate in that relation's fpinfo, which
this patch reuses when costing a foreign path for that relation with the
sortClause ordering; remove that change.
In passing, fix thinko in commit 7012b132d: in estimate_path_cost_size(),
the width estimate for a given foreign-grouped relation to be stored in
that relation's fpinfo was reset incorrectly when costing a basic foreign
path for that relation with local stats.
Apply the patch to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17jaJLPDEkgnP2VmkOg=5wT8YQ1CqssU8JRpZ_NSE+dqQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
|
| |
|
|
|
|
|
|
|
| |
Reorder header files in postgres_fdw.c and connection.c in alphabetical
order.
Author: Etsuro Fujita
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/CAPmGK17ZmNb-EELqu8LmMh2t2uFdbfWNVDEfDO5-bpejHPONMQ@mail.gmail.com
|
| |
|
|
|
|
|
| |
Reported-by: Alexander Lakhin
Author: Alexander Lakhin
Reviewed-by: Amit Kapila and Tom Lane
Discussion: https://postgr.es/m/7208de98-add8-8537-91c0-f8b089e2928c@gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In commit 7012b132d0, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics. The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.
Apply this to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (FINAL, NULL) upperrel,
which is responsible for doing LockRows, LIMIT, and/or ModifyTable.
This provides the ability for postgres_fdw to handle SELECT commands
so that it 1) skips the LockRows step (if any) (note that this is
safe since it performs early locking) and 2) pushes down the LIMIT
and/or OFFSET restrictions (if any) to the remote side. This doesn't
handle the INSERT/UPDATE/DELETE cases.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
| |
This prevents the tests added by commit 4bbf6edfbd and adjusted by
commit 99f6a17dd6 from being useless by plan changes created by an
upcoming commit.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (ORDERED, NULL) upperrel,
which is responsible for evaluating the query's ORDER BY ordering.
Since postgres_fdw is already able to evaluate that ordering remotely
for foreign baserels and foreign joinrels (see commit aa09cd242f et al.),
this adds support for that for foreign grouping relations.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Historically we've always materialized the full output of a CTE query,
treating WITH as an optimization fence (so that, for example, restrictions
from the outer query cannot be pushed into it). This is appropriate when
the CTE query is INSERT/UPDATE/DELETE, or is recursive; but when the CTE
query is non-recursive and side-effect-free, there's no hazard of changing
the query results by pushing restrictions down.
Another argument for materialization is that it can avoid duplicate
computation of an expensive WITH query --- but that only applies if
the WITH query is called more than once in the outer query. Even then
it could still be a net loss, if each call has restrictions that
would allow just a small part of the WITH query to be computed.
Hence, let's change the behavior for WITH queries that are non-recursive
and side-effect-free. By default, we will inline them into the outer
query (removing the optimization fence) if they are called just once.
If they are called more than once, we will keep the old behavior by
default, but the user can override this and force inlining by specifying
NOT MATERIALIZED. Lastly, the user can force the old behavior by
specifying MATERIALIZED; this would mainly be useful when the query had
deliberately been employing WITH as an optimization fence to prevent a
poor choice of plan.
Andreas Karlsson, Andrew Gierth, David Fetter
Discussion: https://postgr.es/m/87sh48ffhb.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support function requests for estimating the selectivity, cost,
and number of result rows (if a SRF) of the target function.
The lack of a way to estimate selectivity of a boolean-returning
function in WHERE has been a recognized deficiency of the planner
since Berkeley days. This commit finally fixes it.
In addition, non-constant estimates of cost and number of output
rows are now possible. We still fall back to looking at procost
and prorows if the support function doesn't service the request,
of course.
To make concrete use of the possibility of estimating output rowcount
for SRFs, this commit adds support functions for array_unnest(anyarray)
and the integer variants of generate_series; the lack of plausible
rowcount estimates for those, even when it's obvious to a human,
has been a repeated subject of complaints. Obviously, much more
could now be done in this line, but I'm mostly just trying to get
the infrastructure in place.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Over at patch https://commitfest.postgresql.org/21/1062/ Dmitry wants to
introduce a more generic subscription mechanism, which allows
subscripting not only arrays but also other object types such as JSONB.
That functionality is introduced in a largish invasive patch, out of
which this internal renaming patch was extracted.
Author: Dmitry Dolgov
Reviewed-by: Tom Lane, Arthur Zakirov
Discussion: https://postgr.es/m/CA+q6zcUK4EqPAu7XRRO5CCjMwhz5zvg+rfWuLzVoxp_5sKS6=w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Discussion: https://postgr.es/m/7719.1548688728@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
| |
estimate_path_cost_size() failed to re-use cached costs when the cached
startup/total cost was 0, so it calculated the costs redundantly.
This is an oversight in commit aa09cd242f; but apply the patch to HEAD
only because there are no reports of actual trouble from that.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5C4AF3F3.4060409%40lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, estimate_path_cost_size() didn't account for tlist eval
costs, except when costing a foreign-grouping path using local
statistics, but such costs should be accounted for when costing that path
using remote estimates, because some of the tlist expressions might be
evaluated locally. Also, such costs should be accounted for in the case
of a foreign-scan or foreign-join path, because the tlist might contain
PlaceHolderVars, which postgres_fdw currently evaluates locally.
This also fixes an oversight in my commit f8f6e44676.
Like that commit, apply this to HEAD only to avoid destabilizing existing
plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5BFD3EAD.2060301%40lab.ntt.co.jp
|
| |
|
|
|
|
| |
Spotted mostly by Fabien Coelho.
Discussion: https://www.postgresql.org/message-id/alpine.DEB.2.21.1901230947050.16643@lancre
|
| |
|
|
|
| |
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
| |
A lot of files only included heapam.h for relation_open, heap_open etc
- replace the heapam.h include in those files with the narrower
header.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
| |
postgresExecForeignInsert(), postgresExecForeignUpdate(), and
postgresExecForeignDelete() are coded almost identically, except that
postgresExecForeignInsert() does not need CTID. Extract that code into
a separate function and use it in all the three function implementations.
Author: Ashutosh Bapat
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/CAFjFpRcz8yoY7cBTYofcrCLwjaDeCcGKyTUivUbRiA57y3v-bw%40mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
COPY can skip writing WAL when loading data on a table which has been
created in the same transaction as the one loading the data, however
this cannot work on views or foreign table as this would result in
trying to flush relation files which do not exist. So disable the
optimization so as commands are able to work the same way with any
configuration of wal_level.
Tests are added to cover the different cases, which need to have
wal_level set to minimal to allow the problem to show up, and that is
not the default configuration.
Reported-by: Luis M. Carril, Etsuro Fujita
Author: Amit Langote, Michael Paquier
Reviewed-by: Etsuro Fujita
Discussion: https://postgr.es/m/15552-c64aa14c5c22f63c@postgresql.org
Backpatch-through: 10, where support for COPY on views has been added,
while v11 has added support for COPY on foreign tables.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The changes I made in 578b229718e assigned oids below
FirstBootstrapObjectId to objects in include/catalog/*.dat files that
did not have an oid assigned, starting at the max oid explicitly
assigned. Tom criticized that for mainly two reasons:
1) It's not clear which values are manually and which explicitly
assigned.
2) The space below FirstBootstrapObjectId gets pretty crowded, and
some PostgreSQL forks have used oids >= 9000 for their own objects,
to avoid conflicting.
Thus create a new range for objects not assigned explicit oids, but
assigned by genbki.pl. For now 1-9999 is for explicitly assigned oids,
FirstGenbkiObjectId (10000) to FirstBootstrapObjectId (1200) -1 is for
genbki.pl assigned oids, and < FirstNormalObjectId (16384) is for oids
assigned during bootstrap. It's possible that we'll have to adjust
these boundaries, but there's some headroom for now.
Add a note suggesting that oids in forks should be assigned in the
9000-9999 range.
Catversion bump for obvious reasons.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/16845.1544393682@sss.pgh.pa.us
|
