| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
postgres_fdw imported generated columns from the remote tables as plain
columns, and caused failures like "ERROR: cannot insert a non-DEFAULT
value into column "foo"" when inserting into the foreign tables, as it
tried to insert values into the generated columns. To fix, we do the
following under the assumption that generated columns in a postgres_fdw
foreign table are defined so that they represent generated columns in
the underlying remote table:
* Send DEFAULT for the generated columns to the foreign server on insert
or update, not generated column values computed on the local server.
* Add to postgresImportForeignSchema() an option "import_generated" to
include column generated expressions in the definitions of foreign
tables imported from a foreign server. The option is true by default.
The assumption seems reasonable, because that would make a query of the
postgres_fdw foreign table return values for the generated columns that
are consistent with the generated expression.
While here, fix another issue in postgresImportForeignSchema(): it tried
to include column generated expressions as column default expressions in
the foreign table definitions when the import_default option was enabled.
Per bug #16631 from Daniel Cherniy. Back-patch to v12 where generated
columns were added.
Discussion: https://postgr.es/m/16631-e929fe9db0ffc7cf%40postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
| |
This is simple enough except for the need to check whether CaseTestExpr
nodes have a collation that is not derived from a remote Var. For that,
examine the CASE's "arg" expression and then pass that info down into the
recursive examination of the WHEN expressions.
Alexander Pyhalov, reviewed by Gilles Darold and myself
Discussion: https://postgr.es/m/fda09032e90d85d9b726a41e03f9097f@postgrespro.ru
|
| |
|
|
|
|
|
|
| |
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 8ff1c94649 allowed TRUNCATE command to truncate foreign tables.
Previously the information about "ONLY" options specified in TRUNCATE
command were passed to the foreign data wrapper. Then postgres_fdw
constructed the TRUNCATE command to issue the remote server and
included "ONLY" options in it based on the passed information.
On the other hand, "ONLY" options specified in SELECT, UPDATE or DELETE
have no effect when accessing or modifying the remote table, i.e.,
are not passed to the foreign data wrapper. So it's inconsistent to
make only TRUNCATE command pass the "ONLY" options to the foreign data
wrapper. Therefore this commit changes the TRUNCATE command so that
it doesn't pass the "ONLY" options to the foreign data wrapper,
for the consistency with other statements. Also this commit changes
postgres_fdw so that it always doesn't include "ONLY" options in
the TRUNCATE command that it constructs.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Kyotaro Horiguchi, Justin Pryzby, Zhihong Yu
Discussion: https://postgr.es/m/551ed8c1-f531-818b-664a-2cecdab99cd8@oss.nttdata.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit introduces new foreign data wrapper API for TRUNCATE.
It extends TRUNCATE command so that it accepts foreign tables as
the targets to truncate and invokes that API. Also it extends postgres_fdw
so that it can issue TRUNCATE command to foreign servers, by adding
new routine for that TRUNCATE API.
The information about options specified in TRUNCATE command, e.g.,
ONLY, CACADE, etc is passed to FDW via API. The list of foreign tables to
truncate is also passed to FDW. FDW truncates the foreign data sources
that the passed foreign tables specify, based on those information.
For example, postgres_fdw constructs TRUNCATE command using them
and issues it to the foreign server.
For performance, TRUNCATE command invokes the FDW routine for
TRUNCATE once per foreign server that foreign tables to truncate belong to.
Author: Kazutaka Onishi, Kohei KaiGai, slightly modified by Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier, Zhihong Yu, Alvaro Herrera, Stephen Frost, Ashutosh Bapat, Amit Langote, Daniel Gustafsson, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/CAOP8fzb_gkReLput7OvOK+8NHgw-RKqNv59vem7=524krQTcWA@mail.gmail.com
Discussion: https://postgr.es/m/CAJuF6cMWDDqU-vn_knZgma+2GMaout68YUgn1uyDnexRhqqM5Q@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch makes two closely related sets of changes:
1. For UPDATE, the subplan of the ModifyTable node now only delivers
the new values of the changed columns (i.e., the expressions computed
in the query's SET clause) plus row identity information such as CTID.
ModifyTable must re-fetch the original tuple to merge in the old
values of any unchanged columns. The core advantage of this is that
the changed columns are uniform across all tables of an inherited or
partitioned target relation, whereas the other columns might not be.
A secondary advantage, when the UPDATE involves joins, is that less
data needs to pass through the plan tree. The disadvantage of course
is an extra fetch of each tuple to be updated. However, that seems to
be very nearly free in context; even worst-case tests don't show it to
add more than a couple percent to the total query cost. At some point
it might be interesting to combine the re-fetch with the tuple access
that ModifyTable must do anyway to mark the old tuple dead; but that
would require a good deal of refactoring and it seems it wouldn't buy
all that much, so this patch doesn't attempt it.
2. For inherited UPDATE/DELETE, instead of generating a separate
subplan for each target relation, we now generate a single subplan
that is just exactly like a SELECT's plan, then stick ModifyTable
on top of that. To let ModifyTable know which target relation a
given incoming row refers to, a tableoid junk column is added to
the row identity information. This gets rid of the horrid hack
that was inheritance_planner(), eliminating O(N^2) planning cost
and memory consumption in cases where there were many unprunable
target relations.
Point 2 of course requires point 1, so that there is a uniform
definition of the non-junk columns to be returned by the subplan.
We can't insist on uniform definition of the row identity junk
columns however, if we want to keep the ability to have both
plain and foreign tables in a partitioning hierarchy. Since
it wouldn't scale very far to have every child table have its
own row identity column, this patch includes provisions to merge
similar row identity columns into one column of the subplan result.
In particular, we can merge the whole-row Vars typically used as
row identity by FDWs into one column by pretending they are type
RECORD. (It's still okay for the actual composite Datums to be
labeled with the table's rowtype OID, though.)
There is more that can be done to file down residual inefficiencies
in this patch, but it seems to be committable now.
FDW authors should note several API changes:
* The argument list for AddForeignUpdateTargets() has changed, and so
has the method it must use for adding junk columns to the query. Call
add_row_identity_var() instead of manipulating the parse tree directly.
You might want to reconsider exactly what you're adding, too.
* PlanDirectModify() must now work a little harder to find the
ForeignScan plan node; if the foreign table is part of a partitioning
hierarchy then the ForeignScan might not be the direct child of
ModifyTable. See postgres_fdw for sample code.
* To check whether a relation is a target relation, it's no
longer sufficient to compare its relid to root->parse->resultRelation.
Instead, check it against all_result_relids or leaf_result_relids,
as appropriate.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqHpHdqdDn48yCEhynnniahH78rwcrv1rEX65-fsZGBOLQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extends the FDW API to allow batching inserts into foreign tables. That
is usually much more efficient than inserting individual rows, due to
high latency for each round-trip to the foreign server.
It was possible to implement something similar in the regular FDW API,
but it was inconvenient and there were issues with reporting the number
of actually inserted rows etc. This extends the FDW API with two new
functions:
* GetForeignModifyBatchSize - allows the FDW picking optimal batch size
* ExecForeignBatchInsert - inserts a batch of rows at once
Currently, only INSERT queries support batching. Support for DELETE and
UPDATE may be added in the future.
This also implements batching for postgres_fdw. The batch size may be
specified using "batch_size" option both at the server and table level.
The initial patch version was written by me, but it was rewritten and
improved in many ways by Takayuki Tsunakawa.
Author: Takayuki Tsunakawa
Reviewed-by: Tomas Vondra, Amit Langote
Discussion: https://postgr.es/m/20200628151002.7x5laxwpgvkyiu3q@development
|
| |
|
|
| |
Backpatch-through: 9.5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch generalizes the subscripting infrastructure so that any
data type can be subscripted, if it provides a handler function to
define what that means. Traditional variable-length (varlena) arrays
all use array_subscript_handler(), while the existing fixed-length
types that support subscripting use raw_array_subscript_handler().
It's expected that other types that want to use subscripting notation
will define their own handlers. (This patch provides no such new
features, though; it only lays the foundation for them.)
To do this, move the parser's semantic processing of subscripts
(including coercion to whatever data type is required) into a
method callback supplied by the handler. On the execution side,
replace the ExecEvalSubscriptingRef* layer of functions with direct
calls to callback-supplied execution routines. (Thus, essentially
no new run-time overhead should be caused by this patch. Indeed,
there is room to remove some overhead by supplying specialized
execution routines. This patch does a little bit in that line,
but more could be done.)
Additional work is required here and there to remove formerly
hard-wired assumptions about the result type, collation, etc
of a SubscriptingRef expression node; and to remove assumptions
that the subscript values must be integers.
One useful side-effect of this is that we now have a less squishy
mechanism for identifying whether a data type is a "true" array:
instead of wiring in weird rules about typlen, we can look to see
if pg_type.typsubscript == F_ARRAY_SUBSCRIPT_HANDLER. For this
to be bulletproof, we have to forbid user-defined types from using
that handler directly; but there seems no good reason for them to
do so.
This patch also removes assumptions that the number of subscripts
is limited to MAXDIM (6), or indeed has any hard-wired limit.
That limit still applies to types handled by array_subscript_handler
or raw_array_subscript_handler, but to discourage other dependencies
on this constant, I've moved it from c.h to utils/array.h.
Dmitry Dolgov, reviewed at various times by Tom Lane, Arthur Zakirov,
Peter Eisentraut, Pavel Stehule
Discussion: https://postgr.es/m/CA+q6zcVDuGBv=M0FqBYX8DPebS3F_0KQ6OVFobGJPM507_SZ_w@mail.gmail.com
Discussion: https://postgr.es/m/CA+q6zcVovR+XY4mfk-7oNk-rF91gH0PebnNfuUjuuDsyHjOcVA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In a statement like "UPDATE remote_tab SET (x,y) = (SELECT ...)",
we'd conclude that the statement could be directly executed remotely,
because the sub-SELECT is in a resjunk tlist item that's not examined
for shippability. Currently that ends up crashing if the sub-SELECT
contains any remote Vars. Prevent the crash by deeming MULTIEXEC
Params to be unshippable.
This is a bit of a brute-force solution, since if the sub-SELECT
*doesn't* contain any remote Vars, the current execution technology
would work; but that's not a terribly common use-case for this syntax,
I think. In any case, we generally don't try to ship sub-SELECTs, so
it won't surprise anybody that this doesn't end up as a remote direct
update. I'd be inclined to see if that general limitation can be fixed
before worrying about this case further.
Per report from Lukáš Sobotka.
Back-patch to 9.6. 9.5 had MULTIEXPR, but we didn't try to perform
remote direct updates then, so the case didn't arise anyway.
Discussion: https://postgr.es/m/CAJif3k+iA_ekBB5Zw2hDBaE1wtiQa4LH4_JUXrrMGwTrH0J01Q@mail.gmail.com
|
| |
|
|
| |
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
| |
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (FINAL, NULL) upperrel,
which is responsible for doing LockRows, LIMIT, and/or ModifyTable.
This provides the ability for postgres_fdw to handle SELECT commands
so that it 1) skips the LockRows step (if any) (note that this is
safe since it performs early locking) and 2) pushes down the LIMIT
and/or OFFSET restrictions (if any) to the remote side. This doesn't
handle the INSERT/UPDATE/DELETE cases.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (ORDERED, NULL) upperrel,
which is responsible for evaluating the query's ORDER BY ordering.
Since postgres_fdw is already able to evaluate that ordering remotely
for foreign baserels and foreign joinrels (see commit aa09cd242f et al.),
this adds support for that for foreign grouping relations.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Over at patch https://commitfest.postgresql.org/21/1062/ Dmitry wants to
introduce a more generic subscription mechanism, which allows
subscripting not only arrays but also other object types such as JSONB.
That functionality is introduced in a largish invasive patch, out of
which this internal renaming patch was extracted.
Author: Dmitry Dolgov
Reviewed-by: Tom Lane, Arthur Zakirov
Discussion: https://postgr.es/m/CA+q6zcUK4EqPAu7XRRO5CCjMwhz5zvg+rfWuLzVoxp_5sKS6=w@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
|
| |
|
|
|
| |
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
| |
A lot of files only included heapam.h for relation_open, heap_open etc
- replace the heapam.h include in those files with the narrower
header.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
| |
|
|
| |
Backpatch-through: certain files through 9.4
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a view references a foreign table, and the foreign table has a
BEFORE INSERT trigger, then it's possible for a tuple inserted or
updated through the view to be changed such that it violates the
view's WITH CHECK OPTION constraint.
Before this commit, postgres_fdw handled this case inconsistently. A
RETURNING clause on the INSERT or UPDATE statement targeting the view
would cause the finally-inserted tuple to be read back, and the WITH
CHECK OPTION violation would throw an error. But without a RETURNING
clause, postgres_fdw would not read the final tuple back, and WITH
CHECK OPTION would not throw an error for the violation (or may throw
an error when there is no real violation). AFTER ROW triggers on the
foreign table had a similar effect as a RETURNING clause on the INSERT
or UPDATE statement.
To fix, this commit retrieves the attributes needed to enforce the
WITH CHECK OPTION constraint along with the attributes needed for the
RETURNING clause (if any) from the remote side. Thus, the WITH CHECK
OPTION constraint is always evaluated against the final tuple after
any triggers on the remote side.
This fix may be considered inconsistent with CHECK constraints
declared on foreign tables, which are not enforced locally at all
(because the constraint is on a remote object). The discussion
concluded that this difference is reasonable, because the WITH CHECK
OPTION is a constraint on the local view (not any remote object);
therefore it only makes sense to enforce its WITH CHECK OPTION
constraint locally.
Author: Etsuro Fujita
Reviewed-by: Arthur Zakirov, Stephen Frost
Discussion: https://www.postgresql.org/message-id/7eb58fab-fd3b-781b-ac33-f7cfec96021f%40lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Deparsing logic in postgres_fdw for locking, FROM clause (alias) and Var
(column qualification) does not need to know the exact number of members
involved, which can be calculated with bms_num_members(), but just if
there is more than one relation involved, which is what bms_membership()
does. The latter is more performant than the former so this shaves a
couple of cycles.
Author: Daniel Gustafsson
Reviewed-by: Ashutosh Bapat, Nathan Bossart
Discussion: https://postgr.es/m/C73594E0-2B67-4E10-BB35-CDE0E41CC384@yesql.se
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Without these fixes, changes to the inserted tuple made by remote
triggers are ignored when building local RETURNING tuples.
In the core code, call ExecInitRoutingInfo at a later point from
within ExecInitPartitionInfo so that the FDW callback gets invoked
after the returning list has been built. But move CheckValidResultRel
out of ExecInitRoutingInfo so that it can happen at an earlier stage.
In postgres_fdw, refactor assorted deparsing functions to work with
the RTE rather than the PlannerInfo, which saves us having to
construct a fake PlannerInfo in cases where we don't have a real one.
Then, we can pass down a constructed RTE that yields the correct
deparse result when no real one exists. Unfortunately, this
necessitates a hack that understands how the core code manages RT
indexes for update tuple routing, which is ugly, but we don't have a
better idea right now.
Original report, analysis, and patch by Etsuro Fujita. Heavily
refactored by me. Then worked over some more by Amit Langote.
Discussion: http://postgr.es/m/5AD4882B.10002@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit a26116c6c accidentally changed the behavior of the SQL format_type()
function while refactoring. For the reasons explained in that function's
comment, a NULL typemod argument should behave differently from a -1
argument. Since we've managed to break this, add a regression test
memorializing the intended behavior.
In passing, be consistent about the type of the "flags" parameter.
Noted by Rushabh Lathia, though I revised the patch some more.
Discussion: https://postgr.es/m/CAGPqQf3RB2q-d2Awp_-x-Ur6aOxTUwnApt-vm-iTtceZxYnePg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
| |
While this is not illegal C, project style is to put "extern" only on
declarations not definitions.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f9RKLWXcMBQhvDYhmsMEo+ALuNgA-NE+AX5Uoke9DJ2Xg@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Introduce a new format_type_extended, with a flags bitmask argument that
can modify the default behavior. A few compatibility and readability
wrappers remain:
format_type_be
format_type_be_qualified
format_type_with_typemod
while format_type_with_typemod_qualified, which had a single caller, is
removed.
Author: Michael Paquier, some revisions by me
Discussion: 20180213035107.GA2915@paquier.xyz
|
| |
|
|
|
|
|
|
|
| |
The modern way is to use a missing_ok argument instead of two separate
almost-identical routines, so do that.
Author: Michaël Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180201063212.GE6398@paquier.xyz
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 0bf3ae88af330496517722e391e7c975e6bad219 allowed direct
foreign table modification; instead of fetching each row, updating
it locally, and then pushing the modification back to the remote
side, we would instead do all the work on the remote server via a
single remote UPDATE or DELETE command. However, that commit only
enabled this optimization when join tree consisted only of the
target table.
This change allows the same optimization when an UPDATE statement
has a FROM clause or a DELETE statement has a USING clause. This
works much like ordinary foreign join pushdown, in that the tables
must be on the same remote server, relevant parts of the query
must be pushdown-safe, and so forth.
Etsuro Fujita, reviewed by Ashutosh Bapat, Rushabh Lathia, and me.
Some formatting corrections by me.
Discussion: http://postgr.es/m/5A57193A.2080003@lab.ntt.co.jp
Discussion: http://postgr.es/m/b9cee735-62f8-6c07-7528-6364ce9347d0@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 7012b132d, which added the ability to push down aggregates and
grouping to the remote server, wasn't careful to ensure that the remote
server would have the same idea we do about which columns are the grouping
columns, in cases where there are textually identical GROUP BY expressions.
Such cases typically led to "targetlist item has multiple sortgroupref
labels" errors.
To fix this reliably, switch over to using "GROUP BY column-number" syntax
rather than "GROUP BY expression" in transmitted queries, and adjust
foreign_grouping_ok() to be more careful about duplicating the sortgroupref
labeling of the local pathtarget.
Per bug #14890 from Sean Johnston. Back-patch to v10 where the buggy code
was introduced.
Jeevan Chalke, reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20171107134948.1508.94783@wrigleys.postgresql.org
|
| |
|
|
| |
Backpatch-through: certain files through 9.3
|
| |
|
|
|
|
|
|
|
|
|
| |
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
|
| |
|
|
|
|
|
|
| |
Change to appendStringInfoChar() or appendStringInfoString() where those
can be used.
Author: David Rowley <david.rowley@2ndquadrant.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
| |
|
|
| |
perltidy run not included.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Clauses in the lists retained by postgres_fdw during planning were
sometimes bare boolean clauses, sometimes RestrictInfos, and sometimes
a mixture of the two in the same list. The comment about that situation
didn't come close to telling the full truth, either. Aside from being
confusing, this had a couple of bad practical consequences:
* waste of planning cycles due to inability to cache per-clause selectivity
and cost estimates;
* sometimes, RestrictInfos would sneak into the fdw_private list of a
finished Plan node, causing failures if, for example, we tried to ship
the Plan tree to a parallel worker.
(It may well be that it's a bug in the parallel-query logic that we
would ever try to ship such a plan to a parallel worker, but in any
case this deserves to be cleaned up.)
To fix, rearrange so that clause lists in PgFdwRelationInfo are always
lists of RestrictInfos, and then strip the RestrictInfos at the last
minute when making a Plan node. In passing do a bit of refactoring and
comment cleanup in postgresGetForeignPlan and foreign_join_ok.
Although the messiness here dates back at least to 9.6, there's no evidence
that it causes anything worse than wasted planning cycles in 9.6, so no
back-patch for now.
Per fuzz testing by Andreas Seltenreich.
Tom Lane and Ashutosh Bapat
Discussion: https://postgr.es/m/87tw5x4vcu.fsf@credativ.de
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This extends the castNode() notation introduced by commit 5bcab1114 to
provide, in one step, extraction of a list cell's pointer and coercion to
a concrete node type. For example, "lfirst_node(Foo, lc)" is the same
as "castNode(Foo, lfirst(lc))". Almost half of the uses of castNode
that have appeared so far include a list extraction call, so this is
pretty widely useful, and it saves a few more keystrokes compared to the
old way.
As with the previous patch, back-patch the addition of these macros to
pg_list.h, so that the notation will be available when back-patching.
Patch by me, after an idea of Andrew Gierth's.
Discussion: https://postgr.es/m/14197.1491841216@sss.pgh.pa.us
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, the only type of child relation is an "other member rel",
which is the child of a baserel, but in the future joins and even
upper relations may have child rels. To facilitate that, introduce
macros that test to test for particular RelOptKind values, and use
them in various places where they help to clarify the sense of a test.
(For example, a test may allow RELOPT_OTHER_MEMBER_REL either because
it intends to allow child rels, or because it intends to allow simple
rels.)
Also, remove find_childrel_top_parent, which will not work for a
child rel that is not a baserel. Instead, add a new RelOptInfo
member top_parent_relids to track the same kind of information in a
more generic manner.
Ashutosh Bapat, slightly tweaked by me. Review and testing of the
patch set from which this was taken by Rajkumar Raghuwanshi and Rafia
Sabih.
Discussion: http://postgr.es/m/CA+TgmoagTnF2yqR3PT2rv=om=wJiZ4-A+ATwdnriTGku1CLYxA@mail.gmail.com
|
| |
|
|
|
|
|
|
|
|
|
| |
The previous deparsing logic wasn't smart enough to produce subqueries
when deparsing; make it smart enough to do that. However, we only do
it that way when necessary, because it generates more complicated SQL
which will be harder for any humans reading the queries to understand.
Etsuro Fujita, reviewed by Ashutosh Bapat
Discussion: http://postgr.es/m/c449261a-b033-dc02-9254-2fe5b7044795@lab.ntt.co.jp
|
| |
|
|
|
|
|
|
|
| |
This is far from a pervasive conversion, but it's a good starting
point.
Author: Peter Eisentraut, with some minor changes by me
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
|
| | |
|
| |
|
|
| |
Etsuro Fujita
|
| |
|
|
|
|
| |
Introduced in commit 7012b132d.
Kyotaro Horiguchi
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the upper planner uses paths, and now that we have proper hooks
to inject paths into the upper planning process, it's possible for
foreign data wrappers to arrange to push aggregates to the remote side
instead of fetching all of the rows and aggregating them locally. This
figures to be a massive win for performance, so teach postgres_fdw to
do it.
Jeevan Chalke and Ashutosh Bapat. Reviewed by Ashutosh Bapat with
additional testing by Prabhat Sahu. Various mostly cosmetic changes
by me.
|
