| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| |
|
|
|
|
|
| |
This can potentially provide a large amount of savings,
because CA certificates can be quite large.
Based on previous work by Mini Hawthorne.
|
| |
|
|
| |
Based on previous work by Mini Hawthorne.
|
| |
|
|
|
|
|
| |
EVP_KEY objects are a reference-counted container for key material, shallow
copies and OpenSSL stack management aren't needed as with certificates.
Based on previous work by Mini Hawthorne.
|
| |
|
|
|
|
|
|
|
|
| |
Certificate chains are now loaded once.
The certificate cache provides each chain as a unique stack of reference
counted elements. This shallow copy is required because OpenSSL stacks
aren't reference counted.
Based on previous work by Mini Hawthorne.
|
| |
|
|
|
|
|
|
|
|
| |
Added ngx_openssl_cache_module, which indexes a type-aware object cache.
It maps an id to a unique instance, and provides references to it, which
are dropped when the cycle's pool is destroyed.
The cache will be used in subsequent patches.
Based on previous work by Mini Hawthorne.
|
| |
|
|
|
|
|
|
| |
Instead of cross-linking the objects using exdata, pointers to configured
certificates are now stored in ngx_ssl_t, and OCSP staples are now accessed
with rbtree in it. This allows sharing these objects between SSL contexts.
Based on previous work by Mini Hawthorne.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Starting from TLSv1.1 (as seen since draft-ietf-tls-rfc2246-bis-00),
the "certificate_authorities" field grammar of the CertificateRequest
message was redone to allow no distinguished names. In TLSv1.3, with
the restructured CertificateRequest message, this can be similarly
done by optionally including the "certificate_authorities" extension.
This allows to avoid sending DNs at all.
In practice, aside from published TLS specifications, all supported
SSL/TLS libraries allow to request client certificates with an empty
DN list for any protocol version. For instance, when operating in
TLSv1, this results in sending the "certificate_authorities" list as
a zero-length vector, which corresponds to the TLSv1.1 specification.
Such behaviour goes back to SSLeay.
The change relaxes the requirement to specify at least one trusted CA
certificate in the ssl_client_certificate directive, which resulted in
sending DNs of these certificates (closes #142). Instead, all trusted
CA certificates can be specified now using the ssl_trusted_certificate
directive if needed. A notable difference that certificates specified
in ssl_trusted_certificate are always loaded remains (see 3648ba7db).
Co-authored-by: Praveen Chaudhary <praveenc@nvidia.com>
|
| |
|
|
| |
The directive allows to pass upstream response trailers to client.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
| |
Unordered chunks could result in trak->end_chunk smaller than trak->start_chunk
in ngx_http_mp4_crop_stsc_data(). Later in ngx_http_mp4_update_stco_atom()
this caused buffer overread while trying to calculate trak->end_offset.
|
| |
|
|
|
|
|
|
|
|
| |
While cropping an stsc atom in ngx_http_mp4_crop_stsc_data(), a 32-bit integer
overflow could happen, which could result in incorrect seeking and a very large
value stored in "samples". This resulted in a large invalid value of
trak->end_chunk_samples. This value is further used to calculate the value of
trak->end_chunk_samples_size in ngx_http_mp4_update_stsz_atom(). While doing
this, a large invalid value of trak->end_chunk_samples could result in reading
memory before stsz atom start. This could potentially result in a segfault.
|
| |
|
|
| |
We own this memory from the session pool.
|
| |
|
|
|
| |
Previously, this used to have extra ngx_explicit_memzero() calls
from within ngx_quic_keys_cleanup(), which might be suboptimal.
|
| |
|
|
| |
For simplicity, this is done on successful decryption of a 1-RTT packet.
|
| | |
|
| |
|
|
|
|
|
| |
In some rare cases, graceful shutdown may happen while initializing an HTTP/2
connection. Previously, such a connection ignored the shutdown and remained
active. Now it is gracefully closed prior to processing any streams to
eliminate the shutdown delay.
|
| |
|
|
|
|
|
|
| |
Previously handlers were mandatory. However they are not always needed.
For example, a server configured with ssl_reject_handshake does not need a
handler. Such servers required a fake handler to pass the check. Now handler
absence check is moved to runtime. If handler is missing, the connection is
closed with 500 code.
|
| |
|
|
| |
Previously, st->value was passed with NULL data pointer to header handlers.
|
| |
|
|
|
|
|
| |
Previously the last chain field of ngx_quic_buffer_t could still reference freed
chains and buffers after calling ngx_quic_free_buffer(). While normally an
ngx_quic_buffer_t object should not be used after freeing, resetting last_chain
field would prevent a potential use-after-free.
|
| |
|
|
|
|
| |
Sending handshake-level CRYPTO frames after the client's Finished message could
lead to memory disclosure and a potential segfault, if those frames are sent in
one packet with the Finished frame.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
While inserting a new entry into the dynamic table, first the entry is added,
and then older entries are evicted until table size is within capacity. After
the first step, the number of entries may temporarily exceed the maximum
calculated from capacity by one entry, which previously caused table overflow.
The easiest way to trigger the issue is to keep adding entries with empty names
and values until first eviction.
The issue was introduced by 987bee4363d1.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously a decoder stream was created on demand for sending Section
Acknowledgement, Stream Cancellation and Insert Count Increment. If conditions
for sending any of these instructions never happen, a decoder stream is not
created at all. These conditions include client not using the dynamic table and
no streams abandoned by server (RFC 9204, Section 2.2.2.2). However RFC 9204,
Section 4.2 defines only one condition for not creating a decoder stream:
An endpoint MAY avoid creating a decoder stream if its decoder sets
the maximum capacity of the dynamic table to zero.
The change enables pre-creation of the decoder stream at HTTP/3 session
initialization if maximum dynamic table capacity is not zero. Note that this
value is currently hardcoded to 4096 bytes and is not configurable, so the
stream is now always created.
Also, the change fixes a potential stack overflow when creating a decoder
stream in ngx_http_v3_send_cancel_stream() while draining a request stream by
ngx_drain_connections(). Creating a decoder stream involves calling
ngx_get_connection(), which calls ngx_drain_connections(), which will drain the
same request stream again. If client's MAX_STREAMS for uni stream is high
enough, these recursive calls will continue until we run out of stack.
Otherwise, decoder stream creation will fail at some point and the request
stream connection will be drained. This may result in use-after-free, since
this connection could still be referenced up the stack.
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
Previously chain links could sometimes be dropped instead of being reused,
which could result in increased memory consumption during long requests.
A similar chain link issue in ngx_http_gzip_filter_module was fixed in
da46bfc484ef (1.11.10).
Based on a patch by Sangmin Lee.
|
| |
|
|
|
|
|
| |
Passing from udp was not possible for the most part due to preread buffer
restriction. Passing to udp could occasionally work, but the connection would
still be bound to the original listen rbtree, which prevented it from being
deleted on connection closure.
|
| |
|
|
|
|
|
| |
When loading certificate keys via ENGINE_load_private_key() in runtime,
it was possible to overwrite configuration on ENGINE_by_id() failure.
OpenSSL documention doesn't describe errors in details, the only reason
I found in the comment to example is when the engine is not available.
|
| |
|
|
|
|
|
| |
Previously, a request body larger than declared in Content-Length resulted in
a 413 status code, because Content-Length was mistakenly used as the maximum
allowed request body, similar to client_max_body_size. Following the HTTP/3
specification, such requests are now rejected with the 400 error as malformed.
|
| | |
|
| |
|
|
| |
Previously a cycle in pass configuration resulted in stack overflow.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ngx_quic_run() function uses qc->close timer to limit the handshake
duration. Normally it is removed by ngx_quic_do_init_streams() which is
called once when we are done with initial SSL processing.
The problem happens when the client sends early data and streams are
initialized in the ngx_quic_run() -> ngx_quic_handle_datagram() call.
The order of set/remove timer calls is now reversed; the close timer is
set up and the timer fires when assigned, starting the unexpected connection
close process.
The fix is to skip setting the timer if streams were initialized during
handling of the initial datagram. The idle timer for quic is set anyway,
and stream-related timeouts are managed by application layer.
|
| |
|
|
|
|
|
| |
Notably, Apple Silicon CPUs have 128 byte cache line size,
which is twice the default configured for generic aarch64.
Signed-off-by: Piotr Sikora <piotr@aviatrix.com>
|
| |
|
|
|
|
| |
The old code was breaking strict aliasing rules.
Signed-off-by: Piotr Sikora <piotr@aviatrix.com>
|
| |
|
|
|
|
|
|
|
| |
Previously, the response text wasn't initialized and the rewrite module
was sending response body set to NULL.
Found with UndefinedBehaviorSanitizer (pointer-overflow).
Signed-off-by: Piotr Sikora <piotr@aviatrix.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, it could result when left-shifting signed integer due to implicit
integer promotion, such that the most significant bit appeared on the sign bit.
In practice, though, this results in the same left value as with an explicit
cast, at least on known compilers, such as GCC and Clang. The reason is that
in_addr_t, which is equivalent to uint32_t and same as "unsigned int" in ILP32
and LP64 data type models, has the same type width as the intermediate after
integer promotion, so there's no side effects such as sign-extension. This
explains why adding an explicit cast does not change object files in practice.
Found with UndefinedBehaviorSanitizer (shift).
Based on a patch by Piotr Sikora.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
While copying ngx_http_variable_value_t structures to geo binary base
in ngx_http_geo_copy_values(), and similarly in the stream module,
uninitialized parts of these structures are copied as well. These
include the "escape" field and possible holes. Calculating crc32 of
this data triggers uninitialized memory access.
Found with MemorySanitizer.
Signed-off-by: Piotr Sikora <piotr@aviatrix.com>
|
| | |
|
| |
|
|
| |
The move makes the code look similar to the corresponding code in http module.
|
| |
|
|
| |
The FreeBSD SO_SETFIB support.
|
| |
|
|
| |
The FreeBSD accept filters support.
|
| |
|
|
| |
The Linux TCP_DEFER_ACCEPT support.
|
| |
|
|
|
|
| |
In preparation for adding more parameters to the listen directive,
and to be in sync with the corresponding structure in the http module.
No functional changes.
|
| | |
|
| |
|
|
|
|
|
|
| |
Originally, the stream module was developed based on the mail module,
following the existing style. Then it was diverged to closely follow
the http module development. This change updates style to use sscf
naming convention troughout the stream module, which matches the http
module code style. No functional changes.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The module allows to pass connections from Stream to other modules such as HTTP
or Mail, as well as back to Stream. Previously, this was only possible with
proxying. Connections with preread buffer read out from socket cannot be
passed.
The module allows selective SSL termination based on SNI.
stream {
server {
listen 8000 default_server;
ssl_preread on;
...
}
server {
listen 8000;
server_name foo.example.com;
pass 127.0.0.1:8001; # to HTTP
}
server {
listen 8000;
server_name bar.example.com;
...
}
}
http {
server {
listen 8001 ssl;
...
location / {
root html;
}
}
}
|
| |
|
|
|
|
|
|
|
| |
Server name is taken either from ngx_stream_ssl_module or
ngx_stream_ssl_preread_module.
The change adds "default_server" parameter to the "listen" directive,
as well as the following directives: "server_names_hash_max_size",
"server_names_hash_bucket_size", "server_name" and "ssl_reject_handshake".
|
| |
|
|
|
|
|
|
|
|
| |
Previously, preread buffer was always read out from socket, which made it
impossible to terminate SSL on the connection without introducing additional
SSL BIOs. The following patches will rely on this.
Now, when possible, recv(MSG_PEEK) is used instead, which keeps data in socket.
It's called if SSL is not already terminated and if an egde-triggered event
method is used. For epoll, EPOLLRDHUP support is also required.
|
